This helper should be used by ethdev drivers supporting virtual devices
to help allocating a new ethdev and properly filling the default fields.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
In some cases the virtual device name should be totally different than
the driver being used for the device. Therefore lets parse the devargs for
the "driver" argument before probing drivers in vdev_probe_all_drivers().
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This adds a name field to the generic struct rte_device. The EAL is
checking for the name being populated when registering a device but
doesn't enforce global unique names as this is left to the bus
implementations.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This is a preparation to embed the generic rte_device into the rte_eth_dev
also for virtual devices.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This allows the virtual bus to be rescanned and probed by tracking the
creation of rte_vdev_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This adds the rte_vdev_device_args() helper function to prepare for
changing the virtual drivers probe() functions take a rte_vdev_device
pointer instead of the name+args strings.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
This adds the rte_vdev_device_name() helper function to retrieve the
rte_vdev_device name which makes moving the name of the low-level
device into struct rte_device easier in the future.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This adds the rte_vdev_device structure which embeds a generic rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This is a preparation for the introduction of the struct rte_vdev_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This is a refactoring of the virtual device probing which moves into into
a proper bus structure.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Based on EAL Bus APIs, PCI bus callbacks and support functions are
introduced in this patch.
EAL continues to have direct PCI init/scan calls as well. These would be
removed in subsequent patches to enable bus only PCI devices.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eal_pci_detach calls pci_detach_all_drivers which loops over all
PCI drivers for detaching the device. This is unnecessary as the device
already has the PCI driver reference which can be used directly.
Removing pci_detach_all_drivers and restructuring rte_eal_pci_detach
and rte_eal_pci_detach_dev to work without looping over driver list.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Matching of PCI device address and driver ID table is being done at two
discreet locations duplicating the code. (rte_eal_pci_probe_one_driver
and rte_eal_pci_detach_dev).
Refactor the match logic as a single function.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Today eth_dev_attach_secondary is defined as static and can only be
called by pci drivers. However, the functionality is also required for
non-pci drivers - so the patch export the function.
Signed-off-by: Ami Sabo <amis@radware.com>
The error return code for rte_ring_dequeue() function should be -ENOENT
rather than -ENOBUFS (which is the error value from the enqueue() fn).
Fixes: cfa7c9e6fc1f ("ring: make bulk and burst return values consistent")
Reported-by: Zhihong Wang <zhihong.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When packet is flag of "PKT_TX_OUTER_IPV6", it also need to be
considered to be tunnel case, in order to calculate the correct
csum value.
Fixes: 2b76648872c9 ("net/e1000: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Remove the include to "rte_timer.h" which is not needed
by latencystats library (only "rte_cycles.h" is used).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
If probe of the whitelisted PCI device fails, reset ret to zero
to silently skip non-whitelisted PCI devices.
Fixes: 10f6c93cea38 ("eal: do not panic on PCI failures")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
It's likely that this function isn't used anywhere, but since it was part
of the public API, mark the function for deprecation for at least one
release.
Signed-off-by: Aaron Conole <aconole@redhat.com>
This function rte_cpu_is_supported is now part of the public ABI,
so should be advertised as such.
Fixes: 37e97ad2c56a ("eal: do not panic when CPU is not supported")
Signed-off-by: Aaron Conole <aconole@redhat.com>
The patch change the prototype of callback function
(rte_intr_callback_fn) by removing the unnecessary parameter.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Remove the inappropriate modification on get_max_intr
field that keep the intr_source read only.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add note to cryptodev API that chained mbufs
are not supported in DOCSISBPI mode.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
HW based crypto drivers may only support limited number of
sessions per queue pair. This requires support for attaching
sessions to specific queue pair. New APIs are introduced to
attach/detach a session with/from a particular queue pair.
These are optional APIs.
Application can call attach API after creating a session
and can call detach API before deleting a session.
Application needs to check if max_nb_sessions_per_qp > 0,
then it should call the attach API.
max_nb_sessions_per_qp = 0 means infinite sessions per qp
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch changes the device configuration API for rte_cryptodev_ops
function prototype, and update all cryptodev PMDs for this change.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Extend the DPDK cryptodev API to enable processing of packets according
to the Baseline Privacy Interface Plus (BPI+) Specification described in
the security specification of the Cablelabs Data-over-Cable Service
Interface Specification (DOCSIS).
Brief summary of BPI+ symmetric cryptography requirements:
BPI+ cryptography uses a block cipher (AES-CBC/DES-CBC) to encrypt/decrypt
all the whole blocks in the packet. However the data length is not always
a block-multiple, so where there is a final block less than the full block
size this residual block requires special handling using AES-CFB/DES-CFB
mode. Similar special handling is specified where there is only one block,
smaller than the block size for the cipher. See spec for further details.
https://apps.cablelabs.com/specification/docsis-3-1-security-specification/
Two new elements are added to the enum rte_crypto_cipher_algorithm.
Note elements of this enum are actually a combination of an algorithm (AES,
3DES, etc) and mode (CBC, CTR, etc). The new DOCSISBPI mode is used to
convey to the PMD that the mode applied should be the specific combination
of CBC and CFB required by the DOCSIS Baseline Privacy Plus Spec.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adds functions to get the cipher/authentication
algorithm enums, given a string. This is useful for applications
which gets the algorithm required from the user, to have a common
string-enum mapping.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DES-CBC and AUTH NULL algorithms were missing in
the array of algorithm strings.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
build error:
include/rte_ring.h:459:22: error: invalid conversion from ‘void*’
to ‘void**’ [-fpermissive]
ENQUEUE_PTRS(r, &r[1], prod_head, obj_table, n, void *);
Implicit casts of void* to void** are considered warnings in some
compilers. E.g. g++ version 5.8. Cast directly to object types
Fixes: a6619414 ("ring: make struct and macros type agnostic")
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_eth_find_next is missing in the map file, which causes
errors with shared library builds.
.../test-pmd/testpmd.c:1693: undefined reference to `rte_eth_find_next'
Adding function to map file fixes the issue.
Fixes: 5588909af21b ("ethdev: add device iterator")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
APIs for selecting the architecure specific implementation and computing
the crc (16-bit and 32-bit CRCs) are added. For CRCs calculation, scalar
as well as x86 intrinsic(sse4.2) versions are implemented.
The scalar version is based on generic Look-Up Table(LUT) algorithm,
while x86 intrinsic version uses carry-less multiplication for
fast CRC computation.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This iterator helps applications iterate over the device list and skip
holes caused by invalid or detached devices.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The hotplug API introduced multiple states for a device with possible
values defined internally, while the related field in struct rte_eth_dev
was made public.
Exposing those states improves consistency because applications have to
deal with the device list directly.
"DEV_DETACHED" is renamed "RTE_ETH_DEV_UNUSED" to better reflect that
the emptiness of a slot is not necessarily the result of detaching a
device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
build error:
In file included from .../lib/librte_ring/rte_ring.c(90):
.../lib/librte_ring/rte_ring.h(162):
error #1366: a reduction in alignment without the "packed" attribute
is ignored
} __rte_cache_aligned;
^
Alignment attribute moved to first element of the struct
Fixes: a6619414e0a9 ("ring: make struct and macros type agnostic")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.
Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Deprecate the following functions:
- rte_set_log_level(), replaced by rte_log_set_global_level()
- rte_get_log_level(), replaced by rte_log_get_global_level()
- rte_set_log_type(), replaced by rte_log_set_level()
- rte_get_log_type(), replaced by rte_log_get_level()
The new functions provide a better control of the per-type log level,
and have a better name prefix (rte_log_).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Example of use:
./app/test-pmd --log-level='pmd\.i40e.*,8'
This enables debug logs for all dynamic logs whose type starts with
'pmd.i40e'.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce 2 new functions to support dynamic log types:
- rte_log_register(): register a log name, and return a log type id
- rte_log_set_level(): set the log level of a given log type
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The reorganization of the mbuf structure induces an ABI breakage.
Bump the library version, and update the documentation accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
