Return value equal to zero means success and really expected.
Fixes: 0fa0070e4391 ("net/sfc: support multicast addresses list controls")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This feature is used to offload stripping of VLAN header from received
packets and update vlan_tci field in mbuf when
DEV_RX_OFFLOAD_VLAN_STRIP & ETH_VLAN_STRIP_MASK flag is set.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Set the rx and tx queue state appropriately when the queues or device are
started or stopped. This enables usage of the ethdev rx/tx queue start/stop
functions with the PCAP PMD.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Set the rx and tx queue state appropriately when the queues or device
are started or stopped.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
CRC_STRIP offload is always enabled, but lost here.
It is more robust to use device level offloads directly to
compose returned value.
Fixes: ff6a1197c3b1 ("net/sfc: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Rx checksum offloads are on device level and should be checked and
enforced on device level.
Avoid logging of Rx checksum offloads enforced for each Rx queue.
Fixes: ff6a1197c3b1 ("net/sfc: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
enic_set_mtu always reverts to the default Rx handler after changing
MTU. Try to use the simpler, non-scatter handler in this case as well.
Fixes: 35e2cb6a1795 ("net/enic: add simple Rx handler")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fallback to filter with VLAN=0 if match without VLAN is not supported
Strictly speaking it is not 100% equivalent, but good tradeoff -
untagged and priority only tagged frames will match.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now exception logic handles these cases:
When FW variant does not support filters with transport ports, but
IP protocol filters are supported, TCP/UDP protocol filters may be
used. When FW variant does not support filters with IPv4/6 addresses
or IP protocol, but filters with EtherType are supported, IPv4 and
IPv6 EtherTypes may be used
Fixes: 096dba799b4a ("net/sfc: avoid creation of ineffective flow rules")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include SPDX tags in source files.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Avoid sq door bell write on zero packet case to reduce additional
traffic on register bus.
Fixes: 1c421f18e0 ("net/thunderx: add single and multi-segment Tx")
Cc: stable@dpdk.org
Signed-off-by: Kiran Kumar <kkokkilagadda@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add decode logic for new flash parts shipped with new Chelsio NICs
to fix initialization failure on these NICs.
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
In i40e FDIR PMD code for checking programming status
function i40e_check_fdir_programming_status(), the initial value
of return value ret should be set to -1 not 0, because if DD bit of
I40E_RX_DESC_STATUS_DD is not write back, this function will return
0 to upper function, this give an error info to upper function, the
fact for this is it is time out for DD write back and it should return
-1.
Fixes: 05999aab4ca6 ("i40e: add or delete flow director")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When link needs to go up, I40E_AQ_PHY_AN_ENABLED is always be set in DPDK.
So all speeds are always set. This causes speed config never works.
This patch fixes this issue and only allows to set available speeds. If
link needs to go up and speed setting is not supported, it will print
warning and set default available speeds. And when link needs to go down,
link speed field should be set to non-zero to avoid link down issue when
binding back to kernel driver.
Fixes: ca7e599d4506 ("net/i40e: fix link management")
Fixes: 1bb8f661168d ("net/i40e: fix link down and negotiation")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently, i40e_dev_tx_queue_setup_runtime checks simple tx and treats
mbuf fast free offloading as No-simple, which is classified as simple tx
in i40e_set_tx_function_flag. This inconsistent behavior causes tx queue
setup fail after queue was stopped. This patch fixes this bug.
Fixes: 399421100e08 ("net/i40e: fix missing mbuf fast free offload")
Cc: stable@dpdk.org
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
TPID can be set by set_switch_config AdminQ command on
new FW release. But find fail to set 0x88A8 on some NICs.
According to the datasheet, Switch Tag value should not
be identical to either the First Tag or Second Tag values.
So set something other than common Ethertype for internal
switching.
Fixes: 73cd7d6dc8e1 ("net/i40e: use set switch AQ instead of register setting")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To parse packet type correctly, profile needs to be
loaded again to update tables in SW even if profile
has exited. But previously packet type parser will
be false after loading profile when profile already
exists.
This patch fixes the issue.
Fixes: 0585f5c3d264 ("net/i40e: fix DDP profile DEL operation")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Xueqin Lin <xueqin.lin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since PPPoL2TP profile is updated, PPPoL2TP packet type
parser will be false with the current parser function.
This patch fixes the issue.
Fixes: 11556c915a08 ("net/i40e: improve packet type parser")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Xueqin Lin <xueqin.lin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently, VFIO will try to map around MSI-X table in the BARs. When
MSI-X table (page-aligned) size is equal to (page-aligned) size of BAR,
VFIO will just skip the BAR.
Recent kernel versions will allow VFIO to map the entire BAR containing
MSI-X tables (*), so instead of trying to map around the MSI-X vector
or skipping the BAR entirely if it's not possible, we can now try
mapping the entire BAR first. If mapping the entire BAR doesn't
succeed, fall back to the old behavior of mapping around MSI-X table or
skipping the BAR.
(*): "vfio-pci: Allow mapping MSIX BAR",
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?id=a32295c612c57990d17fb0f41e7134394b2f35f6
Fixes: 90a1633b2347 ("eal/linux: allow to map BARs with MSI-X tables")
Signed-off-by: Takeshi Yoshimura <t.yoshimura8869@gmail.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
There is no need to check for each library, driver and example whether
certain cflags are supported. Instead of checking inside the loop, do
so outside and reuse the value.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When building a driver or library and a required internal dependency
is missing, the error message printed was:
Tried to get unknown variable "shared_rte_<libname>".
However, a better way to handle this is to catch the missing variable
earlier and convert it into a proper message, informing the user
that the required dependency is missing, and most importantly, what
library or driver wanted that dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A number of drivers have dependencies on libraries which
are only built on Linux, and so they need to be disabled
on FreeBSD. Rather than basing the disabling on OS, in
each case we base the building of the library on the
presence of the required dependency.
Fixes: 50385c106021 ("net/ifc: add to meson build")
Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Fixes: 5936aa3a39b9 ("net/vhost: add to meson build")
Fixes: 3298fa4853b8 ("raw/dpaa2_cmdif: introduce DPAA2 command interface driver")
Fixes: b1ee472fed58 ("raw/dpaa2_qdma: introduce the DPAA2 QDMA driver")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Octentx zipvf PMD provides hardware acceleration for
deflate and lzs compression and decompression operations
using Octeontx zip co-processor, which provide 8
virtualized zip devices.
This patch add basic initialization routine to register zip VFs
to compressdev library.
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
- Add compat.h to make pmd compatible to openssl-1.1.0 and
backward version
- Add rsa sign/verify/encrypt/decrypt and modular operation
support
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Add initial PMD setup routines in compressdev
framework. ZLIB PMD appears as virtual compression
device. User would need to install zlib prior to
enabling this PMD.
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
This patch adds chained mbuf support for input or output buffers
during compression/decompression operations.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds packet-size-distr mode specific parameter parser
to support different threshold packet size value other than default
128 bytes.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch adds Scatter-Gather List (SGL) feature to
QAT compression PMD.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
This patch refactors the sgl struct so it includes a flexible
array of flat buffers as sym and compress PMDs can have
different size sgls.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Put session private data back to mempool when clearing
a crypto session, which is expected to be done in the PMD.
Fixes: b7fa78c7d3b0 ("crypto/virtio: support session related ops")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Jay Zhou <jianjay.zhou@huawei.com>
Added extra case to support 8 byte key size
for 3DES CBC. Also changed capabilities to reflect
the change.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added extra case to support 8 byte key size
for 3DES CBC. Also changed capabilities to reflect
the change.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added support for 3DES cipher algorithm which
will support 8, 16 and 24 byte keys, which also has been
added in the v0.50 of the IPSec Multi-buffer lib.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds support for the v0.50 of the IPsec Multi-buffer lib.
The library now exposes its version, with the idea
of maintaining backwards compatibility in the future,
avoiding breaking the compilation of the PMD every time
there is a new version available.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds support for the v0.50 of the IPsec Multi-buffer lib.
The library now exposes its version, with the idea
of maintaining backwards compatibility in the future,
avoiding breaking the compilation of the PMD every time
there is a new version available.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Instead of having a static field for the buffer manager
MB_MGR in the queue pair structure, use the provided API
that allocates memory for it and store a pointer to it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Processed operations ring is created for each queue pair,
but it was not being freed when the queue pair was released.
Fixes: b0e23c458a6f ("compress/isal: add queue pair related ops")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Fixes: b0e23c458a6f ("compress/isal: add queue pair related ops")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
