This patch fixes the aesni-gcm cryptodev documentation by
filling the lacked unsupported chained mbuf description.
Fixes: 6f16aab09a91 ("crypto/aesni_gcm: migrate to Multi-buffer library")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch removes an unwanted empty line in a sentence.
Fixes: 71afcefbd53e ("doc: update virtio ring size and header size")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Document the packed virtqueue layout support in virtio net PMD.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Document the devargs for virtio-user and also make it clear
that these devargs are only available in virtio-user, i.e. not
supported by the PCI virtio driver.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The virtio_recv_mergeable_pkts_inorder() has been renamed to
virtio_recv_pkts_inorder() and added the non-mergeable support
in below commit.
Fixes: efcda13648d2 ("net/virtio: add non-mergeable support to in-order path")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The Rx function that will be used when in-order is enabled
should be virtio_recv_mergeable_pkts_inorder() instead of
virtio_xmit_pkts_inorder().
Fixes: 8f3bd7e8702d ("net/virtio: add in-order Rx/Tx into selection")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The simple Tx path in virtio has been removed in below commit.
This patch removes an undefined function declaration of simple
Tx and all related descriptions in the doc.
Fixes: 57f818963d80 ("net/virtio: remove simple Tx path")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The testpmd application provides two sets of commands for RX offload
flags configuration. The purpose of this patch is to eliminate this
duplication by removing the old set of commands:
“port config all crc-strip|scatter|rx-cksum|rx-timestamp|hw-vlan|
hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off”
The other commands set that can be used instead in order to enable
or disable the same RX offloading flags on all RX queues of a port is:
"port config <port_id> rx_offload crc_strip|scatter|ipv4_cksum|
udp_cksum|tcp_cksum|timestamp|vlan_strip|vlan_filter|vlan_extend on|off"
This patch also fixes the "drop-en" command, which enables packets
dropping on all RX queues of all ports when no receive buffers available
“port config all drop-en on|off”
Fixes: 384161e00627 ("app/testpmd: adjust on the fly VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start a new release cycle with empty release notes.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch for DPDK Contributor's Guidelines indicates the repos
against which a new PMD should be prepared; for example, for new
network ethernet PMDs it should be dpdk-next-net, and for new crypto
PMDs it should be dpdk-next-crypto. For other new PMDs, the
contributor should refer to the MAINTAINERS file. Though this may seem
obvious, it is not mentioned in DPDK documentation.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Last contribution, last commit closing the release.
Thank you Rami, you will be missed.
It may be needed by the user to limit the LRO session packet size.
In order to allow the above limitation, a new Rx configuration may be
added for the maximum LRO session size.
A new capability may be added too to expose the maximum LRO session size
supported by the port.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add new offload flags ``DEV_RX_OFFLOAD_RSS_HASH`` and
``DEV_RX_OFFLOAD_FLOW_MARK``.
Add new function ``rte_eth_dev_set_supported_ptypes`` to allow application
to set specific ptypes to be updated in ``rte_mbuf::packet_type``
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function rte_eth_dev_count() was marked as deprecated in DPDK 18.05
in commit d9a42a69febf ("ethdev: deprecate port count function").
It is planned to be removed after the next LTS release.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
void return value is bad for get API (like rte_eth_dev_info-get())
since caller does not know if the function does its job or not and
output value is filled in.
void return value is bad for state changing API (like
rte_eth_promiscuous_enable()) since caller should use get API
to understand if state is really changed.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tell users about upcoming changes to rte_ether_addr and
rte_ether_header.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
New accessors have been introduced to provide the hidden information.
This symbol can now be kept internal.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This symbol has been deprecated for quite some time.
Let's drop it as soon as possible.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This symbol has been deprecated for quite some time.
Let's drop it as soon as possible.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduces the possible limitations on maximal Tx queue
size in descriptors if Tx inline data are enabled.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch updates mlx5 documentation in parts:
- txq_inline_min parameter is described in more details,
values are fixed
- maximal amount of segments in multi-segment packets.
Fixes: 38b4b397a57d ("net/mlx5: add Tx configuration and setup")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
Added a note to the getting started guides about patching third
party libraries/dependencies to avoid any known vulnerabilities.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
As legacy filter API "filter_ctrl" is superseded since 2017
by the rte_flow API, and got the deprecated attribute in DPDK 19.05,
it is time to remove the associated features from the matrix.
Not documenting deprecated features as supported will avoid confusion.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add firmware config for MPLS and DevX (required by LRO and DR).
Add a table for queue offloads requirements.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
Some details about libibverbs were missing:
- automatic detection by meson
- main ways to access the device
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
It is not needed to use "console" syntax highlighting
for literal blocks.
The file is easier to read by removing the code-block lines
and simply having double colons in previous line.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
These are simple fixes of punctuation, anchor placement
or wording.
The table format is fixed to avoid having a long line
in the first column.
Fixes: 909be50a34d0 ("doc: update Mellanox guides and release notes")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
The command mlxconfig was not enough explained and too much verbose
at the same time.
The syntax is now explained in introduction before listing the options,
without repeating the commands.
Some options, which are explained elsewhere in the doc,
are added to this list.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
This patch fixes the default settings for packet size to inline
with Enhanced Multi-Packet Write feature, allowing 256B packets
to be inlined with Out-Of-the-Box settings.
Fixes: 50724e1bba76 ("net/mlx5: update Tx definitions")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add tested Marvell integrated NIC platforms to v19.08 release note.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fix the following doc build warning by correcting path.
doc/guides/rel_notes/release_18_05.rst:285:
WARNING: unknown document: ../rawdevs/ifpga_rawdev
Fixes: 473c88f9b391 ("drivers/raw: remove rawdev from directory names")
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add tested Intel platforms with Intel NICs to v19.08 release note.
Signed-off-by: Wenjie Li <wenjiex.a.li@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Flow control was not documented as a supported feature
since the first fill of features matrix for mlx drivers.
Flow API and CRC offload flag support in mlx4 were missing in the
feature matrix when they were implemented (see below commits).
Fixes: 46d5736a7049 ("net/mlx4: support basic flow items and actions")
Fixes: ce07b1514d59 ("net/mlx4: fix CRC stripping capability report")
Fixes: e86b85ca757b ("doc: fill nics features matrix for mlx")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
The backup maintainer role is not explicitly used in the file MAINTAINERS.
Listing names in a priority order is preferred and more flexible
than explicit named roles.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The driver names for rawdevs were both different in make and meson builds
and were non-standard in the make version in that some included "rawdev" in
the name while others didn't.
Therefore, for global consistency of naming, we can use "rte_rawdev" rather
than "rte_pmd" for the prefix for the libraries. While most other driver
categories use "rte_pmd" as a prefix, there is precedent for this in the
mempool drivers use "rte_mempool" as a prefix.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The ifpga and skeleton rawdev drivers included "rawdev" in their directory
names, which was superfluous given that they were in the drivers/raw
directory. Shorten the names via this patch.
For meson builds, this will rename the final library .so/.a files
produced, but those will be renamed again later via a patch to
standardize rawdev names.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When IOMMU is not available, /sys/kernel/iommu_groups will not be
populated. This is happening since at least 3.6 when VFIO support
was added. If the directory is empty, EAL should not pick IOVA as
VA as the default IOVA mode.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When LRO offload is configured in Rx queue, the HW may coalesce TCP
packets from same TCP connection into single packet.
In this case the SW should fix the relevant packet headers because
the HW doesn't update them according to the new created packet
characteristics but provides the update values in the CQE.
Add update header code to the regular Rx burst function to support LRO
feature.
Make sure the first mbuf has enough space to include each TCP header,
otherwise the header update may cross mbufs what complicates the
operation too match.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Patch [1] zeroes the mbuf headroom when the port is configured with LRO
because when working with more than one stride per packet the HW cannot
guaranty an headroom in the start stride of each packet.
Change the solution to support mbuf headroom by adding an empty buffer
as the first packet segment, scatter mode must be enabled to support it.
[1] http://patches.dpdk.org/patch/56912/
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Fix license from BSD-2-Clause to BSD-3-Clause since the file was
lost on the driver license change.
Bump copyright year.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>