MAC filter function was newly added, each PF and VF can have up to
64 MAC addresses.
VF filter needs support from PF host, which is not available now.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
VLAN filter was updated to add/delete one static entry in MAC table for
each combination of VLAN and MAC address. More sanity checks were added.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Since the communication between PF/Switch Manager, VF/PF is
asynchronous through mailbox, it's hard to determine when Switch
Manager/PF host will send the default vlan to PF/VF. So, it's
necessary to set default vlan until the device is started.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
After acquiring MAC address from HW, it's necessary to validate
MAC address before use.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Tested-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
In fm10k, PF driver needs to communicate with switch through
mailbox if it needs to add/delete MAC address.
This fix will validate if switch is ready before going forward.
Then, it is necessary to acquire LPORT_MAP info after issuing
MAC addr request to switch.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Tested-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
In TX side, bit FM10K_TXD_FLAG_LAST in TX descriptor only is set
in the last descriptor for multi-segment packets. But current
implementation didn't set all the fields of TX descriptor, which
will cause descriptors processed now to re-use fields set in last
scroll. If FM10K_TXD_FLAG_LAST bit was set in the last round and
it happened this is not the last descriptor of a multi-segnment
packet, HW will send out the incomplete packet out and leads to
data intergrity issue.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Tested-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
fm10k can't receive frame greater than 1536 and Scatter RX
function can't work correctly. The root cause is
SRRCTL.FM10K_SRRCTL_BUFFER_CHAINING_EN bit is not enabled.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019242.html
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Tested-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
As RX buffer is aligned to 512B within mbuf, some bytes are reserved
for this purpose, and the worst case could be 511B. But SRR reg
assumes all buffers have the same size. In order to fill the gap,
we'll have to consider the worst case and assume 512B is reserved.
If we don't do so, it's possible for HW to overwrite data to next
mbuf.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Tested-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Both PF and VF shared code in function fm10k_stats_get().
The function works well with PF, but has problem with VF since
VF has less queues than PF.
Fixes: a6061d9e70 ("fm10k: register PF driver")
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Original implementation required mbuf size should be greater than
ETHER_MAX_VLAN_FRAME_LEN, which is not necessary. If it's less
than that value, scatter function will be selected and incoming
packets greater than mbuf size will be filled into several mbufs.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Add functions to support promiscuous/allmulticast enable and
disable.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Tested-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
For there're only laser ports on x550 before, we only considered laser
ports for the testpmd CLIs "port start/stop ...". Now we have new x550
devices which have copper ports. Use the API for copper to enable/disable
these ports.
And also let the testpmd CLI "set link-up/down ..." support copper
ports.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When TSO is used with IPv6, generated frames are incorrect.
L4 frame is OK, but length field of IPv6 header was not populated correctly.
IXGBE_ADVTXD_TUCMD_IPV6 flag is set for better readability, even if it
does nothing.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Current ixgbe VF base driver only really read the status register when:
- get_link_status is true
- link reset
- mailbox timeout.
We only set get_link_status to true when we start the PF/VF, so
following calls to ixgbe_dev_link_update will just keep the old link
status unless the link has been reset.
Because of this behaviour, when the link status of the PF changes after
the VF has been initialized, we do not read the current status register
from the nic and instead we just keep the old link status.
Fix the problem by setting this field to true before calling
ixgbe_check_link function from base driver. We don't need to check after
this call for get_link_status anymore, so remove it.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The logic to select ixgbe VF RX function is different than PF side.
There are a few issues with its current state:
- it does not allow to select ixgbe_recv_pkts_vec among other options.
- it can cause memory corruption for scatter mode as it does not allocate
enough entries in sw_ring.
- when checksum is enabled, incorrect vector RX function is selected.
To solve above issues, change the VF RX function selection logic to
mimic PF side.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The flexbytes offset can not be set, because the value is over written
when fdir is enabled.
This patch fixes this issue, and also removes some reduplicate lines.
Fixes: d54a988826 ("ixgbe: support flexpayload configuration of flow director")
Reported-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Each object stored in mempools are suffixed by a trailer, storing
a cookie in debug mode which help to detect memory corruptions.
Like for headers, introduce a structure that materializes the content of
this trailer.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Each object stored in mempools are prefixed by a header, allowing for
instance to retrieve the mempool pointer from the object. When debug is
enabled, a cookie is also added in this header that helps to detect
corruptions and double-frees.
Introduce a structure that materializes the content of this header,
and will simplify future patches adding things in this header.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds a new auto-test for testing the scaling
of concurrent inserts into rte_hash when protected by
the normal spinlock vs. the spinlock with HTM lock
elision. The test also benchmarks single-threaded
access without any locks.
Signed-off-by: Roman Dementiev <roman.dementiev@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds methods that use hardware memory transactions (HTM) on
fast-path for rwlock (a.k.a. lock elision). Here the methods are implemented
for x86 using Restricted Transactional Memory instructions (Intel(r)
Transactional Synchronization Extensions). The implementation fall-backs to
the normal rwlock if HTM is not available or memory transactions fail. This is
not a replacement for all rwlock usages since not all critical sections
protected by locks are friendly to HTM. For example, an attempt to perform
a HW I/O operation inside a hardware memory transaction always aborts
the transaction since the CPU is not able to roll-back should the transaction
fail. Therefore, hardware transactional locks are not advised to be used around
rte_eth_rx_burst() and rte_eth_tx_burst() calls.
Signed-off-by: Roman Dementiev <roman.dementiev@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds methods that use hardware memory transactions (HTM) on fast-path
for spinlocks (a.k.a. lock elision). Here the methods are implemented for x86
using Restricted Transactional Memory instructions (Intel(r) Transactional
Synchronization Extensions). The implementation fall-backs to the normal
spinlock if HTM is not available or memory transactions fail. This is not
a replacement for all spinlock usages since not all critical sections protected
by spinlocks are friendly to HTM. For example, an attempt to perform a HW I/O
operation inside a hardware memory transaction always aborts the transaction
since the CPU is not able to roll-back should the transaction fail.
Therefore, hardware transactional locks are not advised to be used around
rte_eth_rx_burst() and rte_eth_tx_burst() calls.
Signed-off-by: Roman Dementiev <roman.dementiev@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some test rules had equal priority for the same category.
That can cause an ambiguity in build trie and test results.
Specify different priority value for each rule from the same category.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce new RTE_ACL_MASKLEN_TO_BITMASK macro, that will be used
in several places inside librte_acl and it's UT.
Simplify and cleanup build_trie() code a bit.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When rebuilding a trie for limited rule-set,
don't try to split the rule-set even further.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move check for build confg parameter into a separate function.
Simplify acl_calc_wildness() function.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When ring_writer_nodrop port fails to send data, it tries to resend.
Operation is aborted when maximum number of retries is reached.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When ethdev_writer_nodrop port fails to send data, it tries to resend.
Operation is aborted when maximum number of retries is reached.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
New implementation sends burst without copying data to internal buffer
if it is possible. It is similar to tx_bulk function in ethdev_writer
port.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
There was two implementations of tx_bulk function in ethdev_writer port.
The function to run is chosen with WRITER_APPROACH define. This patch
removes WRITER_APPROACH = 0 implementation, as it seems to be slower.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fix doxygen warnings when generating documentation
for qos_meter and qos_sched.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Remove these unnecessary vring descriptor length updating, vhost should
not change them.
virtio in front end should assign value to desc.len for both rx and tx.
Test report: http://dpdk.org/ml/archives/dev/2015-June/018610.html
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Extract codes into a function:
update_secure_len which is used to accumulate the buffer len in the
vring descriptors and to fill struct buf_vec.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Vring enqueue need consider the 2 cases:
1. use separate descriptors to contain virtio header and actual data,
e.g. the first descriptor is for virtio header, and then followed
by descriptors for actual data.
2. virtio header and some data are put together in one descriptor,
e.g. the first descriptor contain both virtio header and part of
actual data, and then followed by more descriptors for rest of packet
data, current DPDK based virtio-net pmd implementation is this case;
So does vring dequeue, it should not assume vring descriptor is chained
or not chained, it should use desc->flags to check whether it is chained
or not. This patch also fixes TX corrupt issue when vhost co-work with
virtio-net driver which uses one single vring descriptor (header and data
are in one descriptor) for virtio tx process on default.
Test report: http://dpdk.org/ml/archives/dev/2015-June/018610.html
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
In containers like docker, current->pid returns current process's global
PID instead of its own PID under containers's PID namespace, and
get_net_ns_by_pid() suppose to accept a virtual PID under its own
namespace, so we should use task_pid_vnr(current) to get current process's
virtual PID instead of current->pid.
Signed-off-by: Wenfeng Liu <liuwf@arraynetworks.com.cn>
Acked-by: Helin Zhang <helin.zhang@intel.com>
We did some (very basic) tests with IGMP, which involves adding
multicast addresses to ETH interfaces. This is done via the ip tool,
an example can be found on e.g.,
http://superuser.com/questions/324824/linux-built-in-or-open-source-program-to-join-multicast-group
and this will fail on KNI interfaces because of an unimplemented ioctl
SIOCADDMULTI. The patch simply adds an empty callback for set_rx_mode
(typically used for setting up hardware) so that the ioctl succeeds.
This is the same thing as the Linux tap interface does.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Johan Faltstrom <johan.faltstrom@netinsight.net>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Loop processing packets dequeued from rx_q was using the number of
packets requested, not how many it actually received.
Variable rename to make code a little more clear
Signed-off-by: Jay Rolette <rolette@infiniteio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
No reason to check out many entries are in kni->rx_q prior to
actually pulling them from the fifo. You can't dequeue more than
are there anyway. Max entries to dequeue is either the max batch
size or however much space is available on kni->free_q (lesser of the two).
Signed-off-by: Jay Rolette <rolette@infiniteio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Do not need the 'safe' version of list_for_each_entry() if you are
not deleting from the list as you iterate over it.
Signed-off-by: Jay Rolette <rolette@infiniteio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Implement .ndo_change_carrier to enable
DPDK applications to propagate link state changes to
kni virtual interfaces through sysfs
Signed-off-by: Vijayakumar Muthuvel Manickam <mmvijay@gmail.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When a KNI object is created, a name is assigned to it which is stored
internally. There is also an API function to look up a KNI object by
name, but there is no API to query the current name of an existing
KNI object. This patch adds just such an API.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Added new test that verifies that rte_jhash_1words,
rte_jhash_2words and rte_jhash_3words return the same
values as rte_jhash.
Note that this patch has been added after the update
of the jhash function because these 3 functions did not
return the same values as rte_jhash before
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>