Following [1], testpmd memory consumption has skyrocketted.
The rte_port structure has gotten quite fat.
struct rte_port {
[...]
struct rte_eth_rxconf rx_conf[65536]; /* 266280 3145728 */
/* --- cacheline 53312 boundary (3411968 bytes) was 40 bytes ago --- */
struct rte_eth_txconf tx_conf[65536]; /* 3412008 3670016 */
/* --- cacheline 110656 boundary (7081984 bytes) was 40 bytes ago --- */
[...]
/* size: 8654936, cachelines: 135234, members: 31 */
[...]
testpmd handles RTE_MAX_ETHPORTS ports (32 by default) which means that it
needs ~256MB just for this internal representation.
The reason is that a testpmd rte_port (the name is quite confusing, as
it is a local type) maintains configurations for all queues of a port.
But where you would expect testpmd to use RTE_MAX_QUEUES_PER_PORT as the
maximum queue count, the rte_port uses MAX_QUEUE_ID set to 64k.
Prefer the ethdev maximum value.
After this patch:
struct rte_port {
[...]
struct rte_eth_rxconf rx_conf[1025]; /* 8240 49200 */
/* --- cacheline 897 boundary (57408 bytes) was 32 bytes ago --- */
struct rte_eth_txconf tx_conf[1025]; /* 57440 57400 */
/* --- cacheline 1794 boundary (114816 bytes) was 24 bytes ago --- */
[...]
/* size: 139488, cachelines: 2180, members: 31 */
[...]
With this, we can ask for less memory in test-null.sh.
[1]: https://git.dpdk.org/dpdk/commit/?id=436b3a6b6e62
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The RTE_FOREACH_MATCHING_DEV iterator requires that
if a break is done before the end of the loop,
the function rte_eth_iterator_cleanup() must be called.
Fixes: 55e51c962432 ("app/testpmd: add device related commands")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The port was not validated before detaching.
Ignore port detach operation when the port is not valid.
Fixes: f8e5baa2662d ("app/testpmd: check not detaching device twice")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Disable packey type parsing on port init, user can enable ptype parsing
by issuing set ptype command.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit introduce the hairpin queues to the testpmd.
the hairpin queue is configured using --hairpinq=<n>
the hairpin queue adds n queue objects for both the total number
of TX queues and RX queues.
The connection between the queues are 1 to 1, first Rx hairpin queue
will be connected to the first Tx hairpin queue
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The dynamic mbuf fields were introduced by [1]. The egress metadata is
good candidate to be moved from statically allocated field tx_metadata to
dynamic one. Because mbufs are used in half-duplex fashion only, it is
safe to share this dynamic field with ingress metadata.
The shared dynamic field contains either egress (if application going to
transmit mbuf with tx_burst) or ingress (if mbuf is received with rx_burst)
metadata and can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_TX_DYNF_METADATA/PKT_RX_DYNF_METADATA flag will be set
along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior accessing the data.
The availability of dynamic mbuf metadata field can be checked with
rte_flow_dynf_metadata_avail() routine.
DEV_TX_OFFLOAD_MATCH_METADATA offload and configuration flag is removed.
The metadata support in PMDs is engaged on dynamic field registration.
Metadata feature is getting complex. We might have some set of actions
and items that might be supported by PMDs in multiple combinations,
the supported values and masks are the subjects to query by perfroming
trials (with rte_flow_validate).
[1] http://patches.dpdk.org/patch/62040/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Let's avoid exporting structures without an identified usecase.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Some flow config related global variables are defined in a header file
which was causing multiple definitions of the variables, fixed it by
moving them to the .c file.
Issue has been detected by '-fno-common' gcc flag.
Also while being there,
removed duplicated 'ACTION_RAW_ENCAP_MAX_DAT definition,
moved 'vxlan_encap_conf' & 'nvgre_encap_conf' initialization to
'cmdline_flow.c' which is better location than 'testpmd.c'
relocated 'action_raw_encap_data' & 'action_raw_decap_data' struct
definitions slightly within the file
Fixes: 1960be7d32f8 ("app/testpmd: add VXLAN encap/decap")
Fixes: dcd962fc6b4e ("app/testpmd: add NVGRE encap/decap")
Fixes: a1191d39cb57 ("app/testpmd: add MPLSoUDP encapsulation")
Fixes: 3e77031be855 ("app/testpmd: add MPLSoGRE encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
port reset cause crash when ports are not stopped. Fixed by refusing the
reset when port is not stopped.
Fixes: 97f1e196799f ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add a wrapper for rte_eth_macaddr_get() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a wrapper for rte_eth_eth_link_get_nowait() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/testpmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add eth_dev_info_get_print_err() which is a wrapper for
rte_eth_dev_info_get() printing error if rte_eth_dev_info_get()
fails and returning its status code.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
On receiving signal, testpmd showing warning as
"LATENCY_STATS: failed to remove Rx/Tx callback"
because rte_latencystats_uninit is called without
checking if latencystats is enabled or not.
After this fix, rte_latencystats_uninit will be
called only if latencystats is enabled.
Fixes: 62d3216d6194 ("app/testpmd: add latency statistics calculation")
Cc: stable@dpdk.org
Signed-off-by: Amit Gupta <agupta3@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
rte_panic causes a backtrace (which is uniformative since all
these calls are in main). Instead use rte_exit and try and make the
messages informative.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since testpmd has several issues which keep it from working correctly
as a secondary process; abort if user tries to do it, rather than
running into later problems.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since testpmd registers log type after processing command
line arguments, it is not possible to do:
# testpmd --log-level='testpmd:info' ...
Fix this by initializing logtype first.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some configuration options can not be tested properly with testpmd
because it automatically starts all ports. This makes it harder
to test driver handling of configuration options:
(for example rx_deferred_start).
Add new command line flag --disable-device-start which skips
the device start. The port can then be started manually later.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With the latest published interface of
rte_eal_hotplug_[add,remove](), and rte_eth_dev_close(),
rte_eth_dev_close() would cleanup all the data structures of
port's eth dev leaving the device common resource intact
if RTE_ETH_DEV_CLOSE_REMOVE is set in dev flags.
So a new command "detach device" (~hotplug remove) to work,
with device identifier like "port attach" is added
to be able to detach closed devices.
Also to display currently probed devices, another command
"show device info <identifier>|all" is also added as a
part of this change.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is no need to use default offloads configuration
if offloads configuration has been pass down from upper layer.
The default offloads are overwritten if not zero.
Fixes: 5e91aeef218c ("app/testpmd: fix offload flags after port config")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
According to API, 'rte_dev_probe()' and 'rte_dev_remove()' must
return 0 or negative error code. Bus code returns positive values
if device wasn't recognized by any driver, so the result of
'bus->plug/unplug()' must be converted. 'local_dev_probe()' and
'local_dev_remove()' also has their internal API, so the conversion
should be done there.
Positive on remove means that device not found by driver.
Positive on probe means that there are no suitable buses/drivers,
i.e. device is not supported.
Users of these API fixed to provide a good example by respecting
DPDK API. This also will allow to catch such issues in the future.
Fixes: a3ee360f4440 ("eal: add hotplug add/remove device")
Fixes: 244d5130719c ("eal: enable hotplug on multi-process")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The RTE_ETH_DEV_CLOSE_REMOVE support has been enabled in
virtio-user, private resources for the port will be freed
by rte_eth_dev_close(), so there is no need to have this
workaround anymore.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Testpmd tries to calculate mbuf size based on "max Rx packet size" and
"max MTU segment number".
When driver set a "nb_mtu_seg_max" to zero, it causes division by zero
segmentation fault in testpmd.
If the PMD set "nb_mtu_seg_max" to zero, testpmd shouldn't try to
calculate the mbuf size.
Fixes: 33f9630fc23d ("app/testpmd: create mbuf based on max supported segments")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Configuring buffer size based following parameters:
- max-pkt-len
- max supported segments per MTU
Buffer size are configured as given below:
- If platform supports infinite segments per packet then default
buffer size is used.
- If platform supports nb_mtu_seg_max segments then buffer size
is configured as (max-pkt-len / nb_mtu_seg_max) + headroom
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is an error in function rxtx_port_config(), which may overwrite
offloads configuration get from function launch_args_parse() when run
testpmd app. So rxtx_port_config() should do "or" for port offloads.
Fixes: d44f8a485f5d ("app/testpmd: enable per queue configure")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Peng Yuan <yuan.peng@intel.com>
At port detach routine after calling the rte_dev_remove()
testpmd performs some cleanup, checking the statuses of
remaining ports and closes the appropriate ones. The port
scanning is based on the new sibling iterator which uses the
invalid (already closed) port for reference. This patch
replaces the foreach iterator and uses the device object for
reference. It is worth to note this cleanup is not needed
for some drivers (at least for mlx5 and probably for others)
and is preserved due to possible compatibility issues.
Fixes: 13302cd5bd63 ("app/testpmd: use port sibling iterator in device cleanup")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Mempools can be populated with anonymous memory when using command line
parameter --mp-alloc=anon.
Considering the mempools are going to be used by the net devices,
it is better to DMA map this memory.
This patch add such mapping now that we have the APIs in place[1].
[1] commit c33a675b6276 ("bus: introduce device level DMA memory mapping")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
providing a command line parameter to set the mempool flags accordingly.
This mode is relevant only when creating an empty mempool and then
populating with memory.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Allocated mempools were never free. it is bad practice.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
When removing a rte_device on a port-based request,
all the sibling ports must be marked as closed.
The iterator loop can be simplified by using the dedicated macro.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Testpmd can generate multiple flows without taking much cost and this
could be a simple traffic generator for developer's quick tests.
If "--txonly-multi-flow" is specified in the command line, IP source
address is varied to generate multiple flows.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add a new "show/clear fwd stats all" command to display fwd and port
statistics on the fly.
To be able to do so, the (testpmd only) rte_port structure can't be used
to maintain any statistics.
Moved the stats dump parts from stop_packet_forwarding() and merge with
fwd_port_stats_display() into fwd_stats_display().
fwd engine statistics are then aggregated into a local per port array.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code review while investigating the fwd stats display code.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
fwd engine statistics are stored as unsigned int (32bits) and can wrap
quite quickly.
Example: sending 7mpps for 614s gives us 4298000000 packets =>
0x1002e4680 larger than 32bits.
testpmd reports forwarding stats as:
RX-packets: 3500381 TX-packets: 3500010 TX-dropped: 371
While the port and accumulated stats are reported as 64bits:
RX-packets: 4298467677 RX-dropped: 0 RX-total: 4298467677
TX-packets: 4298467306 TX-dropped: 371 TX-total: 4298467677
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Having the standard stats and the rx burst stats on the same line gives a
really long line and is not consistent with the rest.
Before:
iofwd engine
RX-packets: 121811360 TX-packets: 121811392 TX-dropped: 0 RX-bursts : 3806605 [100% of 32 pkts]
TX-bursts : 3806606 [100% of 32 pkts]
csum engine
RX-packets: 5467488 TX-packets: 5467520 TX-dropped: 0 RX- bad IP checksum: 0 Rx- bad L4 checksum: 0 Rx- bad outer L4 checksum: 0
RX-bursts : 170859 [100% of 32 pkts]
TX-bursts : 170860 [100% of 32 pkts]
After:
iofwd engine
RX-packets: 259770560 TX-packets: 259770592 TX-dropped: 0
RX-bursts : 8117830 [100% of 32 pkts]
TX-bursts : 8117831 [100% of 32 pkts]
csum engine
RX-packets: 7834016 TX-packets: 7834048 TX-dropped: 0 RX- bad IP checksum: 0 Rx- bad L4 checksum: 0 Rx- bad outer L4 checksum: 0
RX-bursts : 244813 [100% of 32 pkts]
TX-bursts : 244814 [100% of 32 pkts]
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
User can specify stats period(n). The statistics should be available
to user every n second. But the print_stats() function does not
force stdout to be flushed, so for instance, a user reading testpmd's
stdout through pipe will not be able to read it until the stdout
buffer is filled.
Fixes: cfea1f3048d1 ("app/testpmd: print statistics periodically")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch proposes a slightly different test-pmd quit operation: stop
all devices before starting to close any device. Basically, stop all
moving parts before beginning to remove them. The current test-pmd quit
is stopping and closing each device before moving to the next device.
If all devices in the system are independent of each other, this
difference is usually not important. In case of Soft NIC devices, any
such virtual device typically depends on one or more physical devices
being alive, as it accesses their queues, so this difference becomes
important.
Without this straightforward fix, all the Soft NIC devices need to be
manually stopped before the quit command is issued, otherwise the quit
command can sometimes crash the test-pmd application.
Fixes: d3a274ce9dee ("app/testpmd: handle SIGINT and SIGTERM")
Cc: stable@dpdk.org
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add missing implementation for 64-bit log2 function, and extend
the unit test to test this new function. Also, remove duplicate
reimplementation of this function from testpmd and memalloc.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add an rte_bsf64 function that follows the convention of existing
rte_bsf32 function. Also, add missing implementation for safe
version of rte_bsf32, and implement unit tests for all recently
added bsf varieties.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
We already changed to use generic IPC in pdump since below commit:
commit 660098d61f57 ("pdump: use generic multi-process channel")
The `rte_pdump_set_socket_dir()`, the `path` parameter of
`rte_pdump_init()` and the `enum rte_pdump_socktype` have been
deprecated since then. This commit removes these deprecated
APIs and also bumps the pdump ABI.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Because the user's callback is invoked in eal interrupt callback, the
interrupt callback need to be finished before it can be unregistered
when detaching device. So finish callback soon and use a deferred
removal to detach device is need.
It is a workaround, once the device detaching be moved into the eal in
the future, the deferred removal could be deleted. This patch aim to
add this workaround and refine the function name and the description to
be more explicit and comment the limitation.
Fixes: 2049c5113fe8 ("app/testpmd: use hotplug failure handler")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
After probing is done, each new port must be setup.
The new ports are currently guessed by iterating on ports
matching the devargs string used for probing.
When probing a port, it is possible that one more port probing
get triggered (e.g. PF is automatically probed when probing
a VF representor). Such automatic probing will be caught only on event.
The iterator loop may be replaced by a call from the event callback.
In order to be able to test both modes, a command is added
to choose between iterator and event modes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The callback for ethdev events was registered on port start,
so it was missing some events.
It is now registered at the beginning of the main function.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
