Add a request for PF Function Level Reset (FLR) before a load request
Fix the location of the PF FLR initiation to be after ecore_get_hw_info()
(which invokes ecore_hw_info_port_num())
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This commits adds:
- Type of service
- Next protocol ID
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Introduce initial software for rte_flow rules.
VLAN, VXLAN are still not supported.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Previously the capability bitmap for Rx offloads was mistakenly taken
from Tx capability bitmap field. This patch fixes the problem.
Signed-off-by: Jakub Palider <jpa@semihalf.com>
This patch implements NFP PMD support for TSO but it also requires
a firmware advertising the capability.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When VF receives a message from PF, it should check the return
value. But in i40evf_execute_vf_cmd the value is ignored and not
returned to the caller.
Fixes: 95cd21f45d ("i40evf: allocate virtchnl commands buffer per VF")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Flows redirected to a specific queue do not have a valid RSS hash result
and the related mbuf flag must not be set.
Fixes: ecf60761fc ("net/mlx5: return RSS hash result in mbuf")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Removed unused "reg_info" global variable from ixgbe driver.
cat build/app/testpmd.map | grep "Allocating common symbols" -A 15
Allocating common symbols
Common symbol size file
reg_info 0x18 build/lib/librte_pmd_ixgbe.a(ixgbe_ethdev.o)
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Having those modulo operations implies costly instructions execution,
what can be avoided with conditionals and unlikely clauses.
This change makes the software ring read and write indexes to be now
always within the ring size which has to be handled properly. The main
problem is when write pointer wraps and being less than the read pointer.
This happened before, but just with indexes type size (uint32_t) wrapping,
and in that case the processor does the right thing no requiring special
handling by software.
This work has also led to discovering redundant pointers in the driver,
which have been removed.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Apparently VF over Legacy PF doesn't work, as VF would fail after
getting the initial rejection message [instead of sending an additional
one where it asks for a FW override and see if it works].
Fixes: 22d07d939c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add a check and fail the VF's probe request if VF is already in
VF_ACQUIRED state.
Fixes: 22d07d939c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Rx queue access is still done prior to the index being validated by PF.
Hence move Rx queue and status block validation check before accessing
Rx queue to prevent malicious VFs from using out-of-bound queue indices.
Fixes: 98bc693e19 ("net/qede/base: change queue start")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to return error code ECORE_INVAL instead of 0 when EQ elements
is too large as done elsewhere in this function.
Fixes: 22d07d939c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
There are certain conditions under which VF would infinitely send
ACQUIRE messages, as it will fail to understand that PF has rejected
the ACQUIRE request. Fix to reject multiple acquisition requests by VF.
Fixes: 22d07d939c ("net/qede/base: update")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Remove unmeaningful function ID value in print.
Don't print the number of Multicast filters as part of Acquire response,
as this is an obsolete field which isn't enforced by PF.
Fixes: 86a2265e59 ("qede: add SRIOV support")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The vendor_id and device_id are used to determine device type. If you
don't have them, then check for determining device type fails and is
always set to default device type.
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
HW can support up to 128 queues based on the NIC config/personality.
But most of the testing is done with 32 queues for PF and 16 for VF
device across different qede devices, so change here is to advertise
only those many instead of returning max queues supported by HW.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
qede PMD does not support SR-IOV PF driver functionality, so
max_vfs is set to 0 to imply the same.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch includes the following:
- Fix missing hash_key_size advertisement
- Fix RSS hash query function
- Update RSS offload flag
- Accept user provided RSS configuration params via rx_adv_conf
in dev_configure()
- Decouple RSS configuration from common qed_update_vport() and
instead make use of existing RSS APIs for default RSS configuration
Fixes: 6d9e26c42c ("net/qede: get RSS hash configuration")
Fixes: 9c5d0a669f ("net/qede: fix RSS")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
In qede_mac_addr_add() a check is added to differentiate between
unicast/multicast mac to prevent a multicast mac from being wrongly added
to unicast filter table. Secondly, two separate lists will be used to keep
track of unicast/multicast mac filters to prevent duplicate filter
programming. The other change is to remove filter_config from struct
qed_eth_ops_pass and invoke the base APIs directly. This avoids the need
to have multiple structs and function calls.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Update the version of shared codes to cid-ixgbe.2016.11.21.tar.gz,
All files in net/ixgbe/base are developed by another team and
DPDK PMD uses them accordingly.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates the configuration of PHY from Inphi (www.inphi.com)
to flush the register write with a reg read.
The Inphi PHY is configured in ixgbe_setup_mac_link_sfp_x550a.
The Inphi PHY setup flow has been updated to read configuration reg,
write only linear/non-linear, and then read (write flush).
Signed-off-by: Wei Dai <wei.dai@intel.com>
This register was incorrect when compared to the data sheet.
Even though the driver doesn't currently use this register,
it is better to fix it upstream.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch adds Energy Efficient Ethernet (EEE) support for
some Marvell PHYs on some future platforms.
Because EEE capability or status was not indicated previously,
this patch simply assumes that it is supported.
As soon as there is a PHY that does not support EEE, there will
be defects in this area because the driver will not report the
EEE status correctly.
This also deletes some now-unused definitions from an earlier
Marvell PHY implementation and combines a device ID check into a
switch statement.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch removes the flow control conversion from Rx and Tx to pause
and asymmetric pause, as that is handled by the ixgbe_negotiate_fc().
Performing the conversion prior to ixgbe_negotiate_fc() results in
an incorrect fc mode if Rx only pause is selected when the link partner
is advertising Tx.
Signed-off-by: Wei Dai <wei.dai@intel.com>
ixgbe_read_i2c_combined_generic_int() is only used by devices >= X550.
Set the initial value accordingly and remove the MAC type check.
Signed-off-by: Wei Dai <wei.dai@intel.com>
The "FW" PHY type now supports speeds 10M, 100M, and 1G.
Previously, only the 1G speed was reported for this PHY type.
Add reporting 10M and 100M speed options.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch moves some of the extended speeds that come with X552
(5G, 2.5G, 10M) into the link check functions.
It also now returns speed_unknown for speeds that are not known
how to interpret.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Read and store NW_MNG_IF_SEL register because register fields are
used to determine SGMII link for busy SGMII register reads.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Update ixgbe_setup_phy_link_generic that set/unset auto-negotiation.
Ensure that unsupported auto-negotiation speeds are unset.
This is necessary since the PHY NVM may advertise unsupported speeds.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Fix ixgbe_setup_sgmii_m88 to set lane speed to autoneg instead of 1G
to prevent problems with link between PHYs
Fixes: d4b4c68454 ("net/ixgbe/base: add X550em_a FW ALEF support")
Signed-off-by: Wei Dai <wei.dai@intel.com>
