In case DPAA FMAN configuration tool (FMC) is not available,
the system can still work with default queue(1 queue per port).
This patch also fixes some logs related to FQ ids, which were
idetified while testing this support.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A new hook function is added and called inside the PMDs at the end
of the device probing:
- in primary process, after allocating, init and config
- in secondary process, after attaching and local init
This new function is almost empty for now.
It will be used later to add some post-initialization processing.
For the PMDs calling the helpers rte_eth_dev_create() or
rte_eth_dev_pci_generic_probe(), the hook rte_eth_dev_probing_finish()
is called from here, and not in the PMD itself.
Note that the helper rte_eth_dev_create() could be used more,
especially for vdevs, avoiding some code duplication in PMDs.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Split default and max push mode queues to 4 and 8, respectively.
Fixes: 0c504f6950b6 ("net/dpaa: support push mode")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Some of the applications are expecting that if n is 0, it shall
return the supported number of stats. e.g. VPP
Fixes: b21ed3e2a16d ("net/dpaa: support extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch supports batch processing of multiple packets
in the Rx side
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In the I/O path we were calling rte_dpaa_portal_init which
internally checks if a portal is affined to the core.
But this lead to calling of that non-static API in every call.
Instead check the portal affinity in the caller itself for
performance reasons
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Append the __rte_experimental tag to api calls appearing in the
EXPERIMENTAL section of their libraries version map
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
There are several func calls to rte_zmalloc() which don't do null
pointer check on the return value. And before return, the memory is not
freed. Fix it by adding null pointer check and rte_free().
Fixes: 37f9b54bd3cf ("net/dpaa: support Tx and Rx queue setup")
Fixes: 62f53995caaf ("net/dpaa: add frame count based tail drop with CGR")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Reviewed-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Given ethernet Rx queues can be attached with event queue in
parallel or atomic mode. Patch imlmplements Rx queue
configuration, attachment/detachment with given event queue and their
corresponding callbacks to handle events from respective queues.
Signed-off-by: Sunil Kumar Kori <sunil.kori@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Replace the byte based tail queue congestion support
with frame count based congestion groups.
It can easily map to number of RX descriptors for a queue.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Setting correct frame size in dpaa_dev_mtu_set
api call. Also setting correct max frame size in
hardware in dev_configure for jumbo frames
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch update the logic and expose the soc value
register, so that it can be used by other modules as well.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
fix the soc id path and missing fclose
Fixes: cf0fab1d2ca5 ("net/dpaa: support firmware version get API")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The file rte_config.h is generated and automatically included
with -include option.
The explicit includes in drivers and libraries are useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With the IOVA auto detection changes, bus scan is performed before
memory initialization. DPAA bus scan must not use rte_malloc in
its path.
Fixes: cf408c22476c ("eal: auto detect IOVA mode")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add support for parsing the packet type and L2/L3 checksum offload
capability information.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
