The shared pointer is initialized to a static local array defined in the
primary process and it shall not be accessed in the secondary process.
This patch copies the local data to shared data, to avoid data access
violation.
Fixes: 040b44551f ("net/iavf: unify Rx packet type table")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
After DEV_RX_OFFLOAD_JUMBO_FRAME flag removed, drivers give jumbo frame
decisions based on MTU value checks, but some of the checks were wrong
by mistake, causing device initialization to fail, fixing them.
Fixes: b563c14212 ("ethdev: remove jumbo offload flag")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Move requested MTU value check to the API to prevent the duplicated
code.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.
When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.
Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.
This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.
Fixes: f30e69b41f ("ethdev: add device flag to bypass auto-filled queue xstats")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When the iavf_adapter instance is not initialized completely in the
primary process, the secondary process accesses its "rte_eth_dev"
member, it causes secondary process crash.
This patch replaces eth_dev with eth_dev_data in iavf_adapter.
Fixes: f978c1c9b3 ("net/iavf: add RSS hash parsing in AVX path")
Fixes: 9c9aa00403 ("net/iavf: add offload path for Rx AVX512 flex descriptor")
Fixes: 63660ea3ee ("net/iavf: add RSS hash parsing in SSE path")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the iavf_config_rx_queues_irqs function, the memory pointed to by the
intr_handle->intr_vec and qv_map addresses is not released in the
subsequent hook branch, resulting in resource leakage.
Fixes: f593944fc9 ("net/iavf: enable IRQ mapping configuration for large VF")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Due to i40evf will be removed, so there's no need to keep the devargs
option "driver=i40evf" in iavf.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For VF hosted by Intel 700 series NICs, internal Rx interrupt and adminq
interrupt share the same source, that cause a lot CPU cycles be wasted on
interrupt handler on Rx path.
The patch disable PCI interrupt and remove the interrupt handler, replace
it with a low frequency(50ms) interrupt polling daemon which is
implemented by registering an alarm callback periodically.
The virtual channel capability bit VIRTCHNL_VF_OFFLOAD_WB_ON_ITR can be
used to negotiate if iavf PMD needs to enable background alarm or not, so
ideally this change will not impact the case hosted by Intel 800 series
NICS.
This patch implements the same logic with an early i40e commit:
commit 864a800d70 ("net/i40e: remove VF interrupt handler")
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
During the port probe process, there are two abnormal branches that did
not release the previously requested memory, resulting in leakage. The
patch adds an iavf_uninit_vf function, which corresponds to the
iavf_init_vf function.
Fixes: ff2d0c345c ("net/iavf: support generic flow API")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The len variable, used in the computation of max_pkt_len could
overflow, if used to store the result of the following computation:
rxq->rx_buf_len * IAVF_MAX_CHAINED_RX_BUFFERS
Since, we could define the mbuf size to have a large value (i.e 13312),
and IAVF_MAX_CHAINED_RX_BUFFERS is defined as 5, the computation
mentioned above could potentially result in a value which might be
bigger than MAX_USHORT.
The result will be that Jumbo Frames will not work properly
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Kernel PF may not respond to virtual channel commands
VIRTCHNL_OP_GET_RSS_HENA_CAPS and VIRTCHNL_OP_SET_RSS_HENA, which
will cause VF to fail to start.
RSS offload type configuration is not a necessary feature for VF,
so in order to improve VF compatibility, in this patch the PMD will
ignore the error result of above two commands and will print warnings
instead.
Fixes: 5a038d1996 ("net/iavf: fix RSS configuration on i40e VF")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch added the support for VF to config the ETS-based Tx QoS,
including querying current QoS configuration from PF and config queue TC
mapping. PF QoS is configured in advance and the queried info is
provided to the user for future usage. VF queues are mapped to different
TCs in PF through virtchnl.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add common devargs key definition for "bus", "class" and "driver".
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The array rss_key has size 'vf->vf_res->rss_key_size', the array index
should be less than that.
Cc: stable@dpdk.org
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The VF reset can be triggered by the PF reset event, then the PCI bus
master will be cleared, the VF will be not allowed to issue any Memory
or I/O Requests.
So after the reset event is detected, always enable the PCI bus master.
And if failed, the device or system may be in an invalid state, so keep
the VF reset state to mark it as I/O error.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When the default RSS is disabled during initialization, the RSS should
be turned on when creating RSS rule.
This patch adds support to configure RSS key and lookup table even
when the default RSS is disabled.
Fixes: c678299594 ("net/iavf: fix default RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The iavf does not support configuring RSS type on i40e VF,
because the i40e kernel driver does not support
VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF capability.
This patch adds support of RSS type configuration for i40e VF by
sending VIRTCHNL_OP_SET_RSS_HENA message to the PF after checking
that the PF does not support VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF
capability.
Fixes: c678299594 ("net/iavf: fix default RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The i40evf PMD will be deprecated, iavf will be the only VF driver for
Intel 700 serial (i40e) NIC family.
To reach this, there will be 2 steps:
Step 1: iavf will be the default VF driver, while i40evf still can be
selected by devarg: "driver=i40evf".
This is covered by this patch, which include:
1) add all 700 serial NIC VF device ID into iavf PMD
2) skip probe if devargs contain "driver=i40evf" in iavf
3) continue probe if devargs contain "driver=i40evf" in i40evf
Step 2: i40evf and related devarg are removed, this will happen at DPDK
21.11
Between step 1 and step 2, no new feature will be added into i40evf
except bug fix.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When set default MAC address, use type VIRTCHNL_ETHER_ADDR_PRIMARY as this
case is changing device/primary unicast MAC. For other cases, such as
adding or deleting extra unicast addresses and multicast addresses, use
type VIRTCHNL_ETHER_ADDR_EXTRA.
Fixes: cb25d4323f ("net/avf: enable MAC VLAN and promisc ops")
Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Tested-by: Yan Xia <yanx.xia@intel.com>
Implement support for the power management API by implementing a
`get_monitor_addr` function that will return an address of an RX ring's
status bit.
This patch is basically a cut-and-paste of the changes already
committed in ixgbe, i40e and ice drivers in 21.02. This extends
the availability of the power-saving mechanism to the iavf driver,
which is needed for those use-cases using virtual functions.
Patchset where PMD Power Management added in 21.02:
http://patchwork.dpdk.org/project/dpdk/list/?series=14756
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.
The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch change judgment statements to disable RSS for vf
when users need to disable RSS or RSS hash function configured
is not supported.
Fixes: 95f2f0e9fc ("net/iavf: improve default RSS")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add advanced RSS offloads check due to some legacy driver (kernel/DPDK
PF) does not support virtual channel command VIRTCHNL_OP_RSS_HENA with
hena = 0 and VIRTCHNL_OP_ADD_RSS_CFG.
Fixes: 95f2f0e9fc ("net/iavf: improve default RSS")
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Instead of returning error on VLAN init failure, just log the error, so
that the VF device can continue to be configured.
Fixes: 1c301e8c3c ("net/iavf: support new VLAN capabilities")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For AVF with single VLAN mode (SVM), port VLAN stripping config
has already been disabled by PF. In this scenario, the error of
-ENOTSUP can be ignored.
Fixes: 1c301e8c3c ("net/iavf: support new VLAN capabilities")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
Allow to ignore error returned from virtual channel command
VIRTCHNL_OP_SET_RSS_HENA with hena = 0 due to some legacy
kernel driver does not support this. Add warning message when
this happen.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 3fd7a3719c ("net/avf: enable ops for MTU setting")
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The AVF can support to enable / disable CRC strip, so it needs to adjust
the statistics calculation for ibytes according to offload setting.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The new VLAN virtchnl opcodes introduce new capabilities like VLAN
filtering, stripping and insertion.
The AVF needs to query the VLAN capabilities based on current device
configuration firstly.
AVF is able to configure inner VLAN filter when port VLAN is enabled
base on negotiation; and AVF is able to configure outer VLAN (0x8100)
if port VLAN is disabled to be compatible with legacy mode.
When port VLAN is updated by DCF, the AVF needs to reset to query the
new VLAN capabilities.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The VF will check the PF's CRC strip capability firstly, then set the
'CRC strip disable' value in the queue configuration according to the
RX CRC offload setting.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Check if there are enough queue pairs currently allocated, and if not,
request PF to allocate them.
Fixes: e436cd4383 ("net/iavf: negotiate large VF and request more queues")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support to actively configure the RSS through port config.
Any kernel PF enabled default RSS will be disabled during
initialization.
Besides, default RSS will be configured based on
rte_eth_rss_conf->rss_hf.
Currently supported default rss_type: ipv4[6], ipv4[6]_udp, ipv4[6]_tcp,
ipv4[6]_sctp.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable metadata extraction for flexible descriptors in AVF, that would
allow network function directly get metadata without additional parsing
which would reduce the CPU cost for VFs. The enabling metadata
extractions involve the metadata of VLAN/IPv4/IPv6/IPv6-FLOW/TCP/MPLS
flexible descriptors, and the VF could negotiate the capability of
the flexible descriptor with PF and correspondingly configure the
specific offload at receiving queues.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
To enhance the per-core performance, this patch adds some AVX512
instructions to the data path to handle the Tx descriptors.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The iavf driver was trying to use writeback on ITR, but was
never setting an ITR, so it didn't work. This caused performance
to be limited due to too much PCIe traffic and partial writes
during most benchmarking workloads.
Set the ITR during queue setup, which can be checked at runtime
by reading register 0x2800. Setting the value to 2us allows
for generally good streaming packet performance while keeping
latency down.
Fixes: d6bde6b5ea ("net/avf: enable Rx interrupt")
Cc: stable@dpdk.org
Reported-by: Brian Johnson <brian.johnson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The current IRQ mapping configuration only supports max 16 queues and
16 MSIX vectors. Change the queue vector mapping structure to indicate
up to 256 queues. A new opcode is used to handle the case with large
number of queues. To avoid adminq buffer size limitation, we support
to send the virtchnl message multiple times if needed.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Since the adminq buffer size has a 4K limitation, the current virtchnl
command VIRTCHNL_OP_CONFIG_VSI_QUEUES cannot send the message only once
to configure up to 256 queues. In this patch, we send the messages
multiple times to make sure that the buffer size is less than 4K each
time.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Negotiate large VF capability with PF during VF initialization. If large
VF is supported and the number of queues larger than 16 is required, VF
requests additional queues from PF. Mark the state that large VF is
supported.
If the allocated queues number is larger than 16, the max RSS queue
region cannot be 16 anymore. Add the function to query max RSS queue
region from PF, use it in the RSS initialization and future filters
configuration.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When the multicast address list is added, it will flush
previous addresses first, and then add new ones.
If the number of multicast address in the list exceeds
the upper limit, it will cause failure, then need to
roll back previous addresses. This patch fixes the issue.
Fixes: 05e4c3aff3 ("net/iavf: support multicast configuration")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
