There is a function detach_port_device() which takes a port_id,
and a function detach_device() which takes a devargs string.
In order to add a third function accepting a rte_device pointer,
the function detach_device() is renamed into detach_devargs().
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In current version, we are setting the ports
using portmask. With portmask, we can use only
up to 64 ports. This portlist option enables the user
to use more than 64 ports.
Now we can specify the ports in 2 different ways
- Using portmask (-p [0x]nnn): mask must be in hex format
- Using portlist in the following format
--portlist <p1>[-p2][,p3[-p4],...]
--portmask 0x2 is same as --portlist 1
--portmask 0x3 is same as --portlist 0-1
Signed-off-by: Hariprasad Govindharajan <hariprasad.govindharajan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
The new mbuf pool type is added to testpmd. To engage the
mbuf pool with externally attached data buffers the parameter
"--mp-alloc=xbuf" should be specified in testpmd command line.
The objective of this patch is just to test whether mbuf pool
with externally attached data buffers works OK. The memory for
data buffers is allocated from DPDK memory, so this is not
"true" external memory from some physical device (this is
supposed the most common use case for such kind of mbuf pool).
The user should be aware that not all drivers support the mbuf
with EXT_ATTACHED_BUF flags set in newly allocated mbuf (many
PMDs just overwrite ol_flags field and flag value is getting
lost).
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
New flow dump CLI to dump device internal representation information
of flows into screen.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
DPDK now supports registration of dynamic flags (dynf) to the mbuf.
dynf can be given any name, and can be used with a supporting PMD or
supporting application.
Due to the generic concept of the dynf, it is impossible and
meaningless, to define register set/get function for each flag.
This commit introduce a generic way to register and set/clear such
flags.
The basic syntax:
port config <port id> dynf <name> <set|clear>
The first step the new flag is registered. Regardless if the action is
set or clear.
There is no way to unregister the flag, after registering it.
The second step, if the action is set then we set the requested flag.
If this is the first flag that is enabled we also register a call back
for the Tx. In this call back we set the flag.
If the action is clear the requested flag is cleared, and if there
are no more flags that are set, the call back is removed.
The reason that the set is only applied in Tx is that in case of Rx
it is assumed that the value comes from the PMD.
If log is enabled the name of the flag, and value will be printed
in the packet info.
In order for the log to work correctly the registration of the flag
must be done before setting verbose.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Patch adds a runtime function to display the unicast and
multicast MAC addresses added to a port.
Syntax:
show port (port_id) macs|mcast_macs
Usage:
testpmd> show port 0 macs
Number of MAC address added: 1
B0:26:28:7F:F5:C1
testpmd>
testpmd> show port 0 mcast_macs
Number of Multicast MAC address added: 0
testpmd>
testpmd> mac_addr add 0 B0:26:28:7F:22:33
testpmd> mac_addr add 0 B0:26:28:7F:22:34
testpmd> show port 0 macs
Number of MAC address added: 3
B0:26:28:7F:F5:C1
B0:26:28:7F:22:33
B0:26:28:7F:22:34
testpmd>
testpmd> mac_addr remove 0 B0:26:28:7F:22:33
testpmd> show port 0 macs
Number of MAC address added: 2
B0:26:28:7F:F5:C1
B0:26:28:7F:22:34
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Following [1], testpmd memory consumption has skyrocketted.
The rte_port structure has gotten quite fat.
struct rte_port {
[...]
struct rte_eth_rxconf rx_conf[65536]; /* 266280 3145728 */
/* --- cacheline 53312 boundary (3411968 bytes) was 40 bytes ago --- */
struct rte_eth_txconf tx_conf[65536]; /* 3412008 3670016 */
/* --- cacheline 110656 boundary (7081984 bytes) was 40 bytes ago --- */
[...]
/* size: 8654936, cachelines: 135234, members: 31 */
[...]
testpmd handles RTE_MAX_ETHPORTS ports (32 by default) which means that it
needs ~256MB just for this internal representation.
The reason is that a testpmd rte_port (the name is quite confusing, as
it is a local type) maintains configurations for all queues of a port.
But where you would expect testpmd to use RTE_MAX_QUEUES_PER_PORT as the
maximum queue count, the rte_port uses MAX_QUEUE_ID set to 64k.
Prefer the ethdev maximum value.
After this patch:
struct rte_port {
[...]
struct rte_eth_rxconf rx_conf[1025]; /* 8240 49200 */
/* --- cacheline 897 boundary (57408 bytes) was 32 bytes ago --- */
struct rte_eth_txconf tx_conf[1025]; /* 57440 57400 */
/* --- cacheline 1794 boundary (114816 bytes) was 24 bytes ago --- */
[...]
/* size: 139488, cachelines: 2180, members: 31 */
[...]
With this, we can ask for less memory in test-null.sh.
[1]: https://git.dpdk.org/dpdk/commit/?id=436b3a6b6e62
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Disable packey type parsing on port init, user can enable ptype parsing
by issuing set ptype command.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit introduce the hairpin queues to the testpmd.
the hairpin queue is configured using --hairpinq=<n>
the hairpin queue adds n queue objects for both the total number
of TX queues and RX queues.
The connection between the queues are 1 to 1, first Rx hairpin queue
will be connected to the first Tx hairpin queue
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The dynamic mbuf fields were introduced by [1]. The egress metadata is
good candidate to be moved from statically allocated field tx_metadata to
dynamic one. Because mbufs are used in half-duplex fashion only, it is
safe to share this dynamic field with ingress metadata.
The shared dynamic field contains either egress (if application going to
transmit mbuf with tx_burst) or ingress (if mbuf is received with rx_burst)
metadata and can be accessed by RTE_FLOW_DYNF_METADATA() macro or with
rte_flow_dynf_metadata_set() and rte_flow_dynf_metadata_get() helper
routines. PKT_TX_DYNF_METADATA/PKT_RX_DYNF_METADATA flag will be set
along with the data.
The mbuf dynamic field must be registered by calling
rte_flow_dynf_metadata_register() prior accessing the data.
The availability of dynamic mbuf metadata field can be checked with
rte_flow_dynf_metadata_avail() routine.
DEV_TX_OFFLOAD_MATCH_METADATA offload and configuration flag is removed.
The metadata support in PMDs is engaged on dynamic field registration.
Metadata feature is getting complex. We might have some set of actions
and items that might be supported by PMDs in multiple combinations,
the supported values and masks are the subjects to query by perfroming
trials (with rte_flow_validate).
[1] http://patches.dpdk.org/patch/62040/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
In some scenarios, the raw_encap/raw_decap actions could be multiple in
one single flow (e,g. hirepin flow):
... actions raw_decap / raw_encap / raw_decap / raw_encap / ...
This requires the testpmd supports multiple raw_encap/raw_decap data
settings as well.
With the multiple raw_encap/raw_decap settings, the testpmd commands –
set raw_encap / set raw_decap will become:
set raw_encap <index> <item pattern>
set raw_decap <index> <item pattern>
And the actions – raw_encap/raw_decap also could optionally choose which
global raw_encap/raw_decap confs to be used by index:
... actions raw_decap index 1 / raw_encap index 2 / ...
If there is no `index` specified, the default index is 0:
set raw_encap <item pattern>
... actions raw_decap / raw_encap / ...
which will use raw_encap index 0.
In addition to the set raw_encap/raw_decap commands,
show <raw_encap/raw_decap> <index>
show <raw_encap/raw_decap> all
are also introduced into in order to check which index is set and to
what.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Some flow config related global variables are defined in a header file
which was causing multiple definitions of the variables, fixed it by
moving them to the .c file.
Issue has been detected by '-fno-common' gcc flag.
Also while being there,
removed duplicated 'ACTION_RAW_ENCAP_MAX_DAT definition,
moved 'vxlan_encap_conf' & 'nvgre_encap_conf' initialization to
'cmdline_flow.c' which is better location than 'testpmd.c'
relocated 'action_raw_encap_data' & 'action_raw_decap_data' struct
definitions slightly within the file
Fixes: 1960be7d32f8 ("app/testpmd: add VXLAN encap/decap")
Fixes: dcd962fc6b4e ("app/testpmd: add NVGRE encap/decap")
Fixes: a1191d39cb57 ("app/testpmd: add MPLSoUDP encapsulation")
Fixes: 3e77031be855 ("app/testpmd: add MPLSoGRE encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Segregate QinQ from Extend Offload and support QinQ offload
in vlan set command. Merge all port wise rx vlan offloads in
command line help and documentation for a cleaner structure.
Fix port info display to distinguish between qinq strip and
extend offloads. Flatten all VLAN offload info into a single
line to reduce info length.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/test-pmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a wrapper for rte_eth_macaddr_get() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a wrapper for rte_eth_eth_link_get_nowait() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/testpmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add eth_dev_info_get_print_err() which is a wrapper for
rte_eth_dev_info_get() printing error if rte_eth_dev_info_get()
fails and returning its status code.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Some configuration options can not be tested properly with testpmd
because it automatically starts all ports. This makes it harder
to test driver handling of configuration options:
(for example rx_deferred_start).
Add new command line flag --disable-device-start which skips
the device start. The port can then be started manually later.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With the latest published interface of
rte_eal_hotplug_[add,remove](), and rte_eth_dev_close(),
rte_eth_dev_close() would cleanup all the data structures of
port's eth dev leaving the device common resource intact
if RTE_ETH_DEV_CLOSE_REMOVE is set in dev flags.
So a new command "detach device" (~hotplug remove) to work,
with device identifier like "port attach" is added
to be able to detach closed devices.
Also to display currently probed devices, another command
"show device info <identifier>|all" is also added as a
part of this change.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch intend to support
action_raw_encap/decap [1] in a generic and convenient way.
Two new commands - set raw_encap, set raw_decap are introduced just
like the other commands for encap/decap, i.e. set vxlan.
These two commands have corresponding global buffers
which can be used by PMD as the input buffer for raw encap/decap.
The commands use the rte_flow pattern syntax to help user build the
raw buffer in a convenient way.
A common way to use it:
- encap matched egress packet with VxLAN tunnel:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 / vlan tci is 1
inner_type is 0x0800 / ipv4 / udp dst is 4789 / vxlan vni
is 2 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_encap / end
- decap l2 header and encap GRE tunnel on matched egress packet:
testpmd> set raw_decap eth / end_set
testpmd> set raw_encap eth dst is 10:22:33:44:55:66 / ipv4 / gre
protocol is 0x0800 / end_set
testpmd> flow create 0 egress pattern eth / ipv4 / end actions
raw_decap / raw_encap / end
- decap VxLAN tunnel and encap l2 header on matched ingress packet:
testpmd> set raw_encap eth src is 10:11:22:33:44:55 type is 0x0800 /
end_set
testpmd> set raw_decap eth / ipv4 / udp / vxlan / end_set
testpmd> flow create 0 ingress pattern eth / ipv4 / udp dst is 250 /
vxlan vni is 0x1234 / ipv4 / end actions raw_decap /
raw_encap / queue index 1 / mark id 0x1234 / end
[1] http://mails.dpdk.org/archives/dev/2018-October/116092.html
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch changes what testpmd uses as IP addresses when
run in transmit only mode. The old code was using
192.168.0.1 -> 192.168.0.2
but these addresses are reserved for private Internet by RFC 1918.
The new code uses 192.18.0.1 and 192.18.0.2 which are on the
subnet reserved for performance testing by RFC 2544.
New command line option allows the user to pick any other src/dst
address desired.
Notice: this changes the default IP address for transmit only.
It may cause some user who has hardcoded network addresses to report
a regression.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
providing a command line parameter to set the mempool flags accordingly.
This mode is relevant only when creating an empty mempool and then
populating with memory.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Testpmd can generate multiple flows without taking much cost and this
could be a simple traffic generator for developer's quick tests.
If "--txonly-multi-flow" is specified in the command line, IP source
address is varied to generate multiple flows.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add a new "show/clear fwd stats all" command to display fwd and port
statistics on the fly.
To be able to do so, the (testpmd only) rte_port structure can't be used
to maintain any statistics.
Moved the stats dump parts from stop_packet_forwarding() and merge with
fwd_port_stats_display() into fwd_stats_display().
fwd engine statistics are then aggregated into a local per port array.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
fwd engine statistics are stored as unsigned int (32bits) and can wrap
quite quickly.
Example: sending 7mpps for 614s gives us 4298000000 packets =>
0x1002e4680 larger than 32bits.
testpmd reports forwarding stats as:
RX-packets: 3500381 TX-packets: 3500010 TX-dropped: 371
While the port and accumulated stats are reported as 64bits:
RX-packets: 4298467677 RX-dropped: 0 RX-total: 4298467677
TX-packets: 4298467306 TX-dropped: 371 TX-total: 4298467677
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After probing is done, each new port must be setup.
The new ports are currently guessed by iterating on ports
matching the devargs string used for probing.
When probing a port, it is possible that one more port probing
get triggered (e.g. PF is automatically probed when probing
a VF representor). Such automatic probing will be caught only on event.
The iterator loop may be replaced by a call from the event callback.
In order to be able to test both modes, a command is added
to choose between iterator and event modes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The command "port detach" is removing the EAL rte_device
of the ethdev port specified as parameter.
The function name and some comments are updated to make clear
that we are detaching the whole device.
After detaching, the pointer, which maps a port to its device,
is reset. This way, it is possible to check whether a port
is still associated to a (not removed) device.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Previous patch introduces the Tx metadata feature, with unnecessary
restrictions on data entry.
It also used the metadata in txonly fwd engine only.
This fix removes the data entry restrictions on metadata item.
It also implements callback function to add the metadata in every
Tx packet, sent by any fwd engine.
Fixes: c18feafa193c ("app/testpmd: support metadata as flow rule item")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Example for MPLSoGRE tunnel:
ETH / IPV4 / GRE / MPLS / IP / L4..L7
In order to encapsulate such a tunnel there is a need to remove L2 of
the inner packet and encap the remaining tunnel, this is done by
applying 2 rte flow commands l2_decap followed by mplsogre_encap.
Both commands must appear in the same flow, and from the point of the
packet it both actions are applied at the same time. (There is no part
where a packet doesn't have L2 header).
Decapsulating such a tunnel works the other way, first we need to decap
the outer tunnel header and then apply the new L2.
So the commands will be mplsogre_decap / l2_encap
Due to the complex encapsulation of MPLSoGRE flow action and
based on the fact testpmd does not allocate memory, this patch adds a
new command in testpmd to initialise a global structure containing the
necessary information to make the outer layer of the packet. This same
global structures will then be used by the flow commands in testpmd when
the action mplsogre_encap, mplsogre_decap, will be parsed, at this
point, the conversion into such action becomes trivial.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
MPLSoUDP is an example for L3 tunnel encapsulation.
L3 tunnel type is a tunnel that is missing the layer 2 header of the
inner packet.
Example for MPLSoUDP tunnel:
ETH / IPV4 / UDP / MPLS / IP / L4..L7
In order to encapsulate such a tunnel there is a need to remove L2 of
the inner packet and encap the remaining tunnel, this is done by
applying 2 rte flow commands l2_decap followed by mplsoudp_encap.
Both commands must appear in the same flow, and from the point of the
packet it both actions are applied at the same time. (There is no part
where a packet doesn't have L2 header).
Decapsulating such a tunnel works the other way, first we need to decap
the outer tunnel header and then apply the new L2.
So the commands will be mplsoudp_decap / l2_encap
Due to the complex encapsulation of MPLSoUDP and L2 flow actions and
based on the fact testpmd does not allocate memory, this patch adds a
new command in testpmd to initialise a global structures containing the
necessary information to make the outer layer of the packet. This same
global structures will then be used by the flow commands in testpmd when
the action mplsoudp_encap, mplsoudp_decap, l2_encap, l2_decap, will be
parsed, at this point, the conversion into such action becomes trivial.
The l2_encap and l2_decap actions can also be used for other L3 tunnel
types.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As described in [1], this series adds option to set metadata value
as match pattern when creating a new flow rule.
This patch introduces additional options in testpmd commands:
- New item type "meta" "data"
- New per-port offload flag "match_metadata".
It also adds commands to configure the tx_metadata value to use:
- New 'config' command takes a 32 bit value and stores it per port:
port config <port_id> tx_metadata <value>
testpmd will add to any Tx packet sent from this port the metadata
value, and set ol_flags accordingly.
- A matching 'show' command is added to read the configured value:
port config <port_id> tx_metadata <value>
[1] "ethdev: support metadata as flow rule criteria"
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
when changing verbosity level it will configure rx/tx callbacks to dump
packets based on the verbosity value as following:
1- dump only received packets:
testpmd> set verbose 1
2- dump only sent packets:
testpmd> set verbose 2
3- dump sent and received packets:
testpmd> set verbose (any number > 2)
4- disable dump
testpmd> set verbose 0
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
add new rx/tx callback functions to be used for dumping the packets.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
verbosity for the received/sent packets is needed in all of the
forwarding engines so moving it to be in a separate function
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
This adds a new forwarding mode to testpmd to simulate
more realistic behavior of a guest machine engaged in receiving
and sending packets performing Virtual Network Function (VNF).
The goal is to enable a simple way of measuring performance impact on
cache and memory footprint utilization from various VNF co-located on
the same host machine. For this it does:
* Buffer packets in a FIFO:
Create a fifo to buffer received packets. Once it flows over put
those packets into the actual tx queue. The fifo is created per tx
queue and its size can be set with the --noisy-tx-sw-buffer-flushtime
commandline parameter.
A second commandline parameter is used to set a timeout in
milliseconds after which the fifo is flushed.
--noisy-tx-sw-buffer-size [packet numbers]
Keep the mbuf in a FIFO and forward the over flooding packets from the
FIFO. This queue is per TX-queue (after all other packet processing).
--noisy-tx-sw-buffer-flushtime [delay]
Flush the packet queue if no packets have been seen during
[delay]. As long as packets are seen, the timer is reset.
Add several options to simulate route lookups (memory reads) in tables
that can be quite large, as well as route hit statistics update.
These options simulates the while stack traversal and
will trash the cache. Memory access is random.
* simulate route lookups:
Allocate a buffer and perform reads and writes on it as specified by
commandline options:
--noisy-lkup-memory [size]
Size of the VNF internal memory (MB), in which the random
read/write will be done, allocated by rte_malloc (hugepages).
--noisy-lkup-num-writes [num]
Number of random writes in memory per packet should be
performed, simulating hit-flags update. 64 bits per write,
all write in different cache lines.
--noisy-lkup-num-reads [num]
Number of random reads in memory per packet should be
performed, simulating FIB/table lookups. 64 bits per read,
all write in different cache lines.
--noisy-lkup-num-reads-writes [num]
Number of random reads and writes in memory per packet should
be performed, simulating stats update. 64 bits per read-write, all
reads and writes in different cache lines.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
existing testpmd command "show port info" is too verbose.
Added a new summary command to print brief information on ports.
console output:
testpmd> show port summary all
Number of available ports: 2
Port MAC Address Name Driver Status Link
0 11:22:33:44:55:66 0000:07:00.0 net_i40e up 40000Mbps
1 66:55:44:33:22:11 0000:07:00.1 net_i40e up 40000Mbps
Signed-off-by: Emma Finn <emma.finn@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Collect and prints the statistics for PKT_RX_EL4_CKSUM_BAD
errors.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Command shouldn't ask RSS hash functions as argument to get supported
RSS hash function, those values will be overwritten by PMD anyway.
To display configured RSS hash functions
"show port (port_id) rss-hash"
To display configured RSS hash functions and hash key
"show port (port_id) rss-hash key"
Fixes: 8205e241b2b0 ("app/testpmd: add missing type to RSS hash commands")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This commit replaces all local information about pattern items and
actions as well as flow rule duplication code with calls to
rte_flow_conv().
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Currently, mempools can only be allocated either using native
DPDK memory, or anonymous memory. This patch will add two new
methods to allocate mempool using external memory (regular or
hugepage memory), and add documentation about it to testpmd
user guide.
It adds a new flag "--mp-alloc", with four possible values:
native (use regular DPDK allocator), anon (use anonymous
mempool), xmem (use externally allocated memory area), and
xmemhuge (use externally allocated hugepage memory area). Old
flag "--mp-anon" is kept for compatibility.
All external memory is allocated using the same external heap,
but each will allocate and add a new memory area.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Due to the complex NVGRE_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
nvgre_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Due to the complex VXLAN_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
vxlan_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Modied the testpmd softnic forwarding mode as per the
changes in softnic PMD.
To run testpmd application with softnic fwd mode, following
command is used;
$ ./testpmd -c 0xc -n 4 --vdev 'net_softnic0,firmware=script.cli'
-- -i --forward-mode=softnic
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
When the user uses the synchronic hot-plug commands, attach\detach, in
order to insert\remove a port from the system, the forward ports list
update is missed in the current implementation.
Thus, an invalid port may be used for data-path in case of detach
because the detached port was not removed from the forward port list.
In addition, a new port is not used for data-path in case of attach, as the
default behavior of Testpmd, because the attached port was not inserted
to the forward port list.
Update the forward port list in the above cases to allow the correct
port usage for data-path in the next packet forwarding start.
Fixes: edab33b1c01d ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
There are several cases of an invalid port data access that causes the
printing of all the valid ports, for example, when the user asks to
receive a port information of an invalid port.
Wrongly, the port with id 0 is printed in all the above described
cases, regardless of its validity.
Print port 0 only if it is valid as done for the rest of the ports.
Fixes: af75078fece3 ("first public release")
Fixes: b6ea6408fbc7 ("ethdev: store numa_node per device")
Fixes: edab33b1c01d ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
