pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
The fpga_lte_fec is the only bbdev driver that does not use bbdev in the
name, so modify it to keep consistency with the other bbdev drivers. This
will then allow later simplification due to all drivers using the same
basic naming format.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The driver names for rawdevs were both different in make and meson builds
and were non-standard in the make version in that some included "rawdev" in
the name while others didn't.
Therefore, for global consistency of naming, we can use "rte_rawdev" rather
than "rte_pmd" for the prefix for the libraries. While most other driver
categories use "rte_pmd" as a prefix, there is precedent for this in the
mempool drivers use "rte_mempool" as a prefix.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When building dpdk with different kernel headers by specifying
RTE_KERNELDIR igb_uio is compiled to directory with a name of the
version of kernel thats running on the system instead of the one that
dpdk is actually compiled against. Fixed by replacing hardcoded value
with value from RTE_KERNELDIR.
Fixes: 3967af352a ("mk: install kernel modules")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
I modified the API config file to incorporate a search button into the
API documentation page.
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
Implementation still based on Intel SDK libraries
optimized for AVX512 instructions set and 5GNR.
This can be also build for AVX2 for 4G capability or
without SDK dependency for maintenance.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Adding compile flag to allow to build the turbo_sw PMD
without dependency to have the SDK libraries installed.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit removes the support of configuring the device E-switch
using TCF since it is now possible to configure it via DR (direct
verbs rules), and by that to also remove the PMD dependency in libmnl.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the make and meson based build infrastructure along with the
eventdev(SSO) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Correct the wrong -march=-mcpu=armv8.2-a+crc+crypto+lse for
octeontx2 target. Since rte_cc_has_argument drops invalid
CFLAG and -mcpu=octeontx2 picks up the correct optimization,
this typo is not noticed in performance testing.
Fixes: 01d1847987 ("config: add octeontx2 machine")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When a component uses either XOPEN_SOURCE or POSIX_C_SOURCE macro
explicitly in its build recipe, it restricts visibility of a non POSIX
features subset, such as IANA protocol numbers (IPPROTO_* macros).
Non standard features are enabled by default for DPDK both for Linux
thanks to _GNU_SOURCE and for FreeBSD thanks to __BSD_VISIBLE. However
using XOPEN_SOURCE or POSIX_(C_)SOURCE in a component causes
__BSD_VISIBLE to be defined to 0 for FreeBSD, causing different feature
sets visibility for Linux and FreeBSD. It restricts from using IPPROTO
macros in public headers, such as rte_ip.h, despite the fact they are
already widely used in sources.
Add __BSD_VISIBLE macro specified unconditionally for FreeBSD targets
which enforces feature sets visibility unification between Linux and
FreeBSD.
Add single -D_GNU_SOURCE to config/meson.build as a project argument
instead of adding separate directive for each project subtree.
This patch solves the problem of build breaks for [1] on FreeBSD [2]
following the discussion [3].
[1] https://mails.dpdk.org/archives/dev/2019-May/131885.html
[2] http://mails.dpdk.org/archives/test-report/2019-May/082263.html
[3] https://mails.dpdk.org/archives/dev/2019-May/132110.html
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add the make and meson based build infrastructure along
with the mempool(NPA) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add the make and meson based build infrastructure along with
HW definition header file.
This patch adds skeleton otx2_mbox.c file to make sure
all header files are intact, subsequent patches add content
to otx2_mbox.c
This patch also updates CONFIG_RTE_MAX_VFIO_GROUPS
value to 128 as the system can have up to 128 PFs/VFs.
For octeontx2 meson build target, CONFIG_RTE_MAX_VFIO_GROUPS
defined as 128 so no additional changes required.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Shared memory packet interface (memif) PMD allows for DPDK and any other
client using memif (DPDK, VPP, libmemif) to communicate using shared
memory. The created device transmits packets in a raw format. It can be
used with Ethernet mode, IP mode, or Punt/Inject. At this moment, only
Ethernet mode is supported in DPDK memif implementation. Memif is Linux
only.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Weak functions don't work well with static libraries and require the use of
"whole-archive" flag to ensure that the correct function is used when
linking. Since the weak functions are only used as placeholders within
this library alone, we can replace them with non-weak functions using
preprocessor ifdefs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Per armv8 crypto extension support, make build always enable it by default
as long as compiler supports the feature while meson build only enables it
for 'default' machine of generic armv8 architecture.
It is known that not all the armv8 platforms have the crypto extension. For
example, Mellanox BlueField has a variant which doesn't have it. If crypto
enabled binary runs on such a platform, rte_eal_init() fails.
'+crypto' flag currently implies only '+aes' and '+sha2' and enabling it
will generate the crypto instructions only when crypto intrinsics are used.
For the devices supporting 8.2 crypto or newer, compiler could generate
such instructions beyond intrinsics or asm code. For example, compiler can
generate 3-way exclusive OR instructions if sha3 is supported. However, it
has to be enabled by adding '+sha3' as of today.
In DPDK, armv8 cryptodev is the only one which requires the crypto support.
As it even uses external library of Marvell which is compiled out of DPDK
with crypto support and there's run-time check for required cpuflags,
crypto support can be disabled in DPDK.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The meson build never checked for the presence of rdrand and rdseed
instructions, while make build never checked for rdseed. Ensure builds
always have the appropriate checks - and therefore defines - for these
instructions. For runtime, we also add in rdseed to the list of known
bits returned from cpuid() instruction, so we can confirm its presence at
application init time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
By default on 32-bit systems, file offsets are given as 32-bit values
which prevents support for large files. While this is unlikely to be
a problem, enabling large file support globally makes "make" and
"meson" builds consistent, since meson always enables large file
support, and without this change, the size of "struct stat" fields
will be different between the two builds.
The only location where this appears to be significant is in the
dpaax common code, where a printf needs to be updated for 32-bit
builds.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
gcc 9 on Fedora 30 gives an error
"taking address of packed member may result in an
unaligned pointer value" warnings.
For clang builds this warning is already disabled,
so disable "-Waddress-of-packed-member" for gcc builds
also.
Snippet of build error:
lib/librte_eal/linux/eal/eal_memalloc.c: In function ‘alloc_seg_walk’:
lib/librte_eal/linux/eal/eal_memalloc.c:768:12: error:
taking address of packed member of ‘struct rte_mem_config’ may result
in an unaligned pointer value [-Werror=address-of-packed-member]
768 | cur_msl = &mcfg->memsegs[msl_idx];
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
On Skylake platform, with native build, KNI kernel module crashes
because of the corrupted values passed to kernel module.
The corruption occurs because the userspace kni library works
unexpectedly. Compiler [1] is using AVX512 instructions and generated
binary is wrong [2].
It turned around gcc does its job correct, but gas is generating binary
wrong. And expected binutils 2.30, 2.31 & 2.31.1 are affected. Issue has
been fixed in binutils 2.32 with:
Commit x86: don't mistakenly scale non-8-bit displacements
AVX512 was already disabled with bintuils 2.30 [3], extending it to
2.31 & 2.31.1 too.
[1] gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2)
[2] gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
[3] Bugzilla ID 97 has the details.
Bugzilla ID: 249
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add RCU library supporting quiescent state based memory reclamation method.
This library helps identify the quiescent state of the reader threads so
that the writers can free the memory associated with the lock less data
structures.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Introduce rte_cc_has_argument() Makefile helper to
check a given argument is support by the compiler.
Example Usage:
include $(RTE_SDK)/mk/rte.helper.mk
MACHINE_CFLAGS += $(call rte_cc_has_argument, -mcpu=octeontx2)
This would allow adding -mcpu=octeontx2 in MACHINE_CFLAGS
if it is only supported by the compiler. The use case for such
scheme is to enable the mcpu optimization if the compiler
supports else it needs to compile the source code without
any errors.
This patch also moves inclusion of toolchain's rte.vars.mk
to before the machine's rte.vars.mk inclusion to make
correct CC available for the cross compile case.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add a new PMD driver for AF_XDP which is a proposed faster version of
AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
[2].
This is the vanilla version PMD which just uses a raw buffer registered as
the umem.
[1] https://fosdem.org/2018/schedule/event/af_xdp/
[2] https://lwn.net/Articles/745934/
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The rte_stack library provides an API for configuration and use of a
bounded stack of pointers. Push and pop operations are MT-safe, allowing
concurrent access, and the interface supports pushing and popping multiple
pointers at a time.
The library's interface is modeled after another DPDK data structure,
rte_ring, and its lock-based implementation is derived from the stack
mempool handler. An upcoming commit will migrate the stack mempool handler
to rte_stack.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This patch adds Poll Mode Driver for asymmetric crypto
functions of Intel QuickAssist Technology hardware.
It contains plain driver with no functions implemented, specific
algorithms will be introduced in separate patches.
This patch depends on a QAT PF driver for device initialization. See
the file docs/guides/cryptodevs/qat.rst for configuration details.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Added rte_os.h files to support OS specific functionality.
Updated build system to contain OS headers in the include
path.
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since we have the version number in a separate file at the root level,
we should not need to duplicate this in rte_version.h too. Best
approach here is to move the macros for specifying the year/month/etc.
parts from the version header file to the build config file - leaving
the other utility macros for e.g. printing the version string, where they
are.
For "make", this is done by having a little bit of awk parse the version
file and pass the results through to the preprocessor for the config
generation stage.
For "meson", this is done by parsing the version and adding it to the
standard dpdk_conf object.
In both cases, we need to append a large number - in this case "99",
previously 16 in original code - to the version number when we want to do
version number comparisons. Without this, the release version e.g. 19.05.0
will compare as less than it's RC's e.g. 19.05.0-rc4. With it, the
comparison is correct as "19.05.0.99 > 19.05.0-rc4.99".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add a new file VERSION to hold the current DPDK version number.
Have meson use this file for it's project version, and have make use
it for reporting out "showversion" and "showversionum".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
AVX512 is a x86 specific feature, So, enable AVX512
warning only on x86.
Fixes: a32ca9a4eb ("mk: fix scope of disabling AVX512F support")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This is the main patch which renames the macros, functions,
structs and any remaining strings in the iavf code.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rename Intel Ethernet Adaptive Virtual Function driver avf to iavf.
This is the first patch which will only renames the directory name,
lib name, filenames and updates the new name in makefile and meson
files. Also updates the #include files in source files.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
