This patch supports check max SIMD bitwidth when choosing NEON and SVE
vector path.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, the L3L4P/L3E/L4E/OL3E/OL4E fields in Rx descriptor used to
indicate hardware checksum result:
1. L3L4P: indicates hardware has processed L3L4 checksum for this
packet, if this bit is 1 then L3E/L4E/OL3E/OL4E is trustable.
2. L3E: L3 checksum error indication, 1 means with error.
3. L4E: L4 checksum error indication, 1 means with error.
4. OL3E: outer L3 checksum error indication, 1 means with error.
5. OL4E: outer L4 checksum error indication, 1 means with error.
Driver will set the good checksum flag through packet type and
L3E/L4E/OL3E/OL4E when L3L4P is 1, it runs as follows:
1. If packet type indicates it's tunnel packet:
1.1. If packet type indicates it has inner L3 and L3E is zero, then
mark the IP checksum good.
1.2. If packet type indicates it has inner L4 and L4E is zero, then
mark the L4 checksum good.
1.3. If packet type indicates it has outer L4 and OL4E is zero, then
mark the outer L4 checksum good.
2. If packet type indicates it's not tunnel packet:
2.1. If packet type indicates it has L3 and L3E is zero, then mark the
IP checksum good.
2.2. If packet type indicates it has L4 and L4E is zero, then mark the
L4 checksum good.
As described above, the good checksum calculation is time consuming,
it impacts the Rx performance.
By balancing performance and functionality, driver uses the following
scheme to set good checksum flag when L3L4P is 1:
1. If L3E is zero, then mark the IP checksum good.
2. If L4E is zero, then mark the L4 checksum good.
The performance gains are 3% in small packet iofwd scenarios.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch supports runtime config of mask device capability, it was
used to mask the capability which queried from firmware.
The device argument key is "dev_caps_mask" which takes hexadecimal
bitmask where each bit represents whether mask corresponding capability.
Its main purpose is to debug and avoid problems.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The integrity item allows the application to match
on the integrity of a packet.
Usage example:
match that packet integrity checks are OK. The checks depend on
packet layers. For example ICMP packet will not check L4 level.
flow create 0 ingress pattern integrity value mask 0x01 value spec 0x01
Match that L4 packet is OK - check L2 & L3 & L4 layers:
flow create 0 ingress pattern integrity value mask 0xfe value spec 0xfe
Signed-off-by: Ori Kam <orika@nvidia.com>
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, DPDK application can offload the checksum check,
and report it in the mbuf.
However, as more and more applications are offloading some or all
logic and action to the HW, there is a need to check the packet
integrity so the right decision can be taken.
The application logic can be positive meaning if the packet is
valid jump / do actions, or negative if packet is not valid
jump to SW / do actions (like drop) and add default flow
(match all in low priority) that will direct the miss packet
to the miss path.
Since currently rte_flow works in positive way the assumption is
that the positive way will be the common way in this case also.
When thinking what is the best API to implement such feature,
we need to consider the following (in no specific order):
1. API breakage.
2. Simplicity.
3. Performance.
4. HW capabilities.
5. rte_flow limitation.
6. Flexibility.
First option: Add integrity flags to each of the items.
For example add checksum_ok to IPv4 item.
Pros:
1. No new rte_flow item.
2. Simple in the way that on each item the app can see
what checks are available.
Cons:
1. API breakage.
2. Increase number of flows, since app can't add global rule and must
have dedicated flow for each of the flow combinations, for example
matching on ICMP traffic or UDP/TCP traffic with IPv4 / IPv6 will
result in 5 flows.
Second option: dedicated item
Pros:
1. No API breakage, and there will be no for some time due to having
extra space. (by using bits)
2. Just one flow to support the ICMP or UDP/TCP traffic with IPv4 /
IPv6.
3. Simplicity application can just look at one place to see all possible
checks.
4. Allow future support for more tests.
Cons:
1. New item, that holds number of fields from different items.
For starter the following bits are suggested:
1. packet_ok - means that all HW checks depending on packet layer have
passed. This may mean that in some HW such flow should be split to
number of flows or fail.
2. l2_ok - all check for layer 2 have passed.
3. l3_ok - all check for layer 3 have passed. If packet doesn't have
L3 layer this check should fail.
4. l4_ok - all check for layer 4 have passed. If packet doesn't
have L4 layer this check should fail.
5. l2_crc_ok - the layer 2 CRC is O.K.
6. ipv4_csum_ok - IPv4 checksum is O.K. It is possible that the
IPv4 checksum will be O.K. but the l3_ok will be 0. It is not
possible that checksum will be 0 and the l3_ok will be 1.
7. l4_csum_ok - layer 4 checksum is O.K.
8. l3_len_OK - check that the reported layer 3 length is smaller than the
frame length.
Example of usage:
1. Check packets from all possible layers for integrity.
flow create integrity spec packet_ok = 1 mask packet_ok = 1 .....
2. Check only packet with layer 4 (UDP / TCP)
flow create integrity spec l3_ok = 1, l4_ok = 1 mask l3_ok = 1
l4_ok = 1
Signed-off-by: Ori Kam <orika@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds link autoneg status display in port_infos_display().
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Right now, rte_flow_shared_action_* APIs are used for some shared
actions, like RSS, count. The shared action should be created before
using it inside a flow. These shared actions sometimes are not
really shared but just some indirect actions decoupled from a flow.
The new functions rte_flow_action_handle_* are added to replace
the current shared functions rte_flow_shared_action_*.
There are two types of flow actions:
1. the direct (normal) actions that could be created and stored
within a flow rule. Such action is tied to its flow rule and
cannot be reused.
2. the indirect action, in the past, named shared_action. It is
created from a direct actioni, like count or rss, and then used
in the flow rules with an object handle. The PMD will take care
of the retrieve from indirect action to the direct action
when it is referenced.
The indirect action is accessed (update / query) w/o any flow rule,
just via the action object handle. For example, when querying or
resetting a counter, it could be done out of any flow using this
counter, but only the handle of the counter action object is
required.
The indirect action object could be shared by different flows or
used by a single flow, depending on the direct action type and
the real-life requirements.
The handle of an indirect action object is opaque and defined in
each driver and possibly different per direct action type.
The old name "shared" is improper in a sense and should be replaced.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*", the testpmd application code and command
line interfaces also need to be updated to do the adaption.
The testpmd application user guide is also updated. All the "shared
action" related parts are replaced with "indirect action" to have a
correct explanation.
The parameter of "update" interface is also changed. A general
pointer will replace the rte_flow_action struct pointer due to the
facts:
1. Some action may not support fields updating. In the example of a
counter, the only "update" supported should be the reset. So
passing a rte_flow_action struct pointer is meaningless and
there is even no such corresponding action struct. What's more,
if more than one operations should be supported, for some other
action, such pointer parameter may not meet the need.
2. Some action may need conditional or partial update, the current
parameter will not provide the ability to indicate which part(s)
to update.
For different types of indirect action objects, the pointer could
either be the same of rte_flow_action* struct - in order not to
break the current driver implementation, or some wrapper
structures with bits as masks to indicate which part to be
updated, depending on real needs of the corresponding direct
action. For different direct actions, the structures of indirect
action objects updating will be different.
All the underlayer PMD callbacks will be moved to these new APIs.
The RTE_FLOW_ACTION_TYPE_SHARED is kept for now in order not to
break the ABI. All the implementations are changed by using
RTE_FLOW_ACTION_TYPE_INDIRECT.
Since the APIs are changed from "rte_flow_shared_action*" to the new
"rte_flow_action_handle*" and the "update" interface's 3rd input
parameter is changed to generic pointer, the mlx5 PMD that uses these
APIs needs to do the adaption to the new APIs as well.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Kunpeng 930 uses a new RAS exception reporting solution.
The reset type and exception status are reported through
firmware. The driver modifies the corresponding code to
adapt to the new solution.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
'HNS3_RXD_TSIND_S' and 'HNS3_RXD_TSIND_M' is unused, which should
be deleted.
This patch fixed it.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, upper-layer application could get queue state only
through pointers such as dev->data->tx_queue_state[queue_id],
this is not the recommended way to access it. So this patch
add get queue state when call rte_eth_rx_queue_info_get and
rte_eth_tx_queue_info_get API.
Note: After add queue_state field, the 'struct rte_eth_rxq_info' size
remains 128B, and the 'struct rte_eth_txq_info' size remains 64B, so
it could be ABI compatible.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes HiSilicon copyright syntax.
According to the suggestion of our legal department,
to standardize the copyright license of our code to
avoid potential copyright risks, we make a unified
modification to the "Hisilicon", which was nonstandard,
in the main modules we maintain.
We change it to "HiSilicon", which is consistent with
the terms used on the following official website:
https://www.hisilicon.com/en/terms-of-use.
Fixes: 565829db8b ("net/hns3: add build and doc infrastructure")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The "--tx-queue-stats-mapping" and "--rx-queue-stats-mapping"
and display and clear of "stats_map" have been removed from
testpmd.
This patch deletes some descriptions about queue stats mapping
in testpmd doc.
Fixes: 08dcd18706 ("app/testpmd: fix queue stats mapping configuration")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The commit a8f8b672d5 ("examples/l3fwd: skip Tx queue drain on first iteration")
implemented a change to the EM and LPM lookup methods to
prevent the Tx queue drain running in the first iteration of their
packet processing loops.
This patch applies the same change into the new FIB lookup method.
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
The new_mtu was assigned twice, the first assignment could be removed.
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
According to the programming guide, the rte_eal_init should be used pairs
with rte_eal_cleanup.
This patch add rte_eal_cleanup to examples to encourage new users of
DPDK to use it.
Fixes: aec9c13c52 ("eal: add function to release internal resources")
Fixes: 3d0fad56b7 ("examples/fips_validation: add crypto FIPS application")
Fixes: c8e6ceeceb ("examples/ioat: add new sample app for ioat driver")
Fixes: 4ff457986f ("examples/l2fwd-event: add default poll mode routines")
Fixes: 08bd1a1744 ("examples/l3fwd-graph: add graph-based l3fwd skeleton")
Fixes: c5eebf85ba ("examples/ntb: add example for NTB")
Fixes: b77f660028 ("examples/pipeline: add new example application")
Fixes: edbed86d1c ("examples/vdpa: introduce a new sample for vDPA")
Fixes: c19beb3f38 ("examples/vhost_blk: introduce vhost storage sample")
Fixes: f5188211c7 ("examples/vhost_crypto: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
The function pthread_setname_np() was originally not available on
FreeBSD. It has been added in FreeBSD 12.2:
https://svnweb.freebsd.org/base?view=revision&revision=362264
The EAL implementation of rte_thread_setname() is duplicated
in the telemetry library, which does not depend on EAL,
so the compilation is safe in all systems.
Fixes: 5da7736f8c ("telemetry: set socket listener thread name")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The value in "/sys/.../cpuinfo_cur_freq" may not be exactly the
same as what was set. For example, if "2400000" is written to
"/sys/.../cpufreq/scaling_setspeed" to set the frequency, then the
value in "/sys/.../cpuinfo_cur_freq" may be "2401222". So need to
round the value.
Fixes: ed7c51a6a6 ("app/test: vm power management")
Cc: stable@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
For some platforms the newly-set frequency may not be effective
immediately. If we didn't get the right value from cpuinfo_cur_freq
immediately, add 10ms delay each time before rechecking until
timeout.
From our test, for some arm platforms, it requires up to 700ms when
going from a minimum to a maximum frequency. And it's not the
driver/software issue.
Fixes: ed7c51a6a6 ("app/test: vm power management")
Cc: stable@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
This patch fixed wrong error variable in logging message.
Fixes: 83633ba230 ("test/bpf: fix few small issues")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch fixes the traffic class oversubscription watermark
value by initialising it with computed value of maximum watermark.
Fixes: ac6fcb841b ("sched: update subport rate dynamically")
Cc: stable@dpdk.org
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
When fragmenting IPv4 packet, the data offset should be calculated through
the IHL field in IP header rather than using sizeof(struct rte_ipv4_hdr).
Fixes: 4c38e5532a ("ip_frag: refactor IPv4 fragmentation into a proper library")
Cc: stable@dpdk.org
Signed-off-by: Pu Xu <583493798@qq.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There was a call for thread create function without result check.
Add result check and message print out after failure.
Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Add result check and message print out for thread creation after
failure.
Fixes: b80fe1805e ("telemetry: introduce backward compatibility")
Fixes: 6dd571fd07 ("telemetry: introduce new functionality")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ciara Power <ciara.power@intel.com>
This patch supports set ctrl worker thread name which is helpful for
debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch supports set helloworld thread name which is helpful for
debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch supports set notify and vring relay thread name which is
helpful for debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch supports set monitor thread name which is helpful for
debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch supports set VSI reset thread name which is helpful for
debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch supports set delay packet generator start thread name which
is helpful for debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch supports set init threads name which is helpful for
debugging.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for the disable_libs option, to allow disabling the build of
particular libraries. As part of this, maintain a list of what libraries
can safely be disabled, without breaking the build - for now this list is
solely those libraries which are not built on FreeBSD, kni, power and
vhost. This list can be expanded by future patches.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
With all the library folders renamed to remove the "librte_" prefix,
we need to fixup patches for easier backport, i.e. add back in the
prefix for any references to those renamed files.
In the script itself we use a general approach to allow other functions
to be added in future for other modifications needed to patches.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
makes it awkward to add features referring to individual libraries in the
build - should the lib names be specified with or without the prefix.
Therefore, we can just remove the library prefix and use the library's
unique name as the directory name, i.e. 'eal' rather than 'librte_eal'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
To help with consistency across all files, add a section to the
contributors guide on meson coding style. Although short, this covers
the basics for now, and can be extended in future as we see the need.
Meson style guide recommends four-space indents, like for python,
so add to editorconfig file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Switch from using tabs to 4 spaces for meson.build indentation, for the
basic infrastructure and tooling files, as well as doc and kernel
directories.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As with the lib and drivers directories, we can use "continue" keyword to
reduce the indentation level of the majority of the foreach block. At the
same time, we can also replace tab indentation with spaces.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As with the lib and drivers directories, we can use "continue" keyword to
reduce the indentation level of the majority of the foreach block. At the
same time, we can also replace tab indentation with spaces.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Ensure all lists of drivers are standardized:
* one driver per line
* lists double-indented with spaces (as they are line continuations)
* elements in alphabetical order
* opening and closing list brackets "[" & "]" on own lines
* last element has trailing comma
Any code snippets in the list files is adjusted to single-indent using
whitespace to correspond to the new style also.
The lists of standard library dependencies per class, and other short
lists are not formatted one-per-line as these lists are not expected to
grow beyond 2 or 3 entries.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
As with the library meson.build file, we can use the "continue" keyword to
reduce the level of indentation used for the majority of the build file.
Since we are changing the whitespace indentation level, we also update the
body of the foreach loop to use the meson standard, 4-space indentation.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Switch from using tabs to 4 spaces for meson.build indentation. Perform
other formatting cleanups such as ensure that long lists of files are one
per line, and terminating with a final comma before the closing brace to
make addition/removals easier. In some cases, reorder lists of items
where they were not in alphabetical order.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
With the lib/meson.build file changed from C-style indentation to
python-style indentation, we need to correct the indentation of the lists
of libraries, since these libs were not modified in the previous patches.
For ease of management of the list and working with patches for adding
to the list, put each library on it's own line.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Two simplifications can be made to the build file which reduce indentation
levels and make it easier to read:
1. When meson build support was first added, the compat library existed in
DPDK as a single header file. Since that header has been merged into EAL,
we no longer need to support header-only libraries, so can shorten the
code.
2. From meson 0.49 onwards we have the "continue" keyword available to
break out of one loop iteration and begin the next. This allows us to
remove blocks in the build configuration file which were conditional on the
"build" variable being true. Instead we can use "continue" to abort
processing at the point where the "build" value becomes false.
Since this patch changes the indentation level of large parts of the
meson.build file, we use the opportunity to adjust the whitespace used to
the meson-standard 4-spec indentation level.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Compilation on CentOS 7 with gcc version 4.8.5 fails with
the following errors:
error: 'src_struct_id' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
error: 'dst_struct_id' may be used uninitialized in this
function [-Werror=maybe-uninitialized]
This patch fixes the build errors by initializing both variables.
Bugzilla ID: 683
Fixes: 783768136f ("pipeline: auto-detect endianness of action arguments")
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
KNI runs userspace callback with rtnl lock held, this is not working
fine with some devices that needs to interact with kernel interface in
the callback, like Mellanox devices.
The solution is releasing the rtnl lock before calling the userspace
callback. But it requires two consideration:
1. The rtnl lock needs to released before 'kni->sync_lock', otherwise it
causes deadlock with multiple KNI devices, please check below the A.
for the details of the deadlock condition.
2. When rtnl lock is released for interface down event, it cause a
regression and deadlock, so can't release the rtnl lock for interface
down event, please check below B. for the details.
As a solution, interface down event is handled asynchronously and for
all other events rtnl lock is released before processing the callback.
A. KNI sync lock is being locked while rtnl is held.
If two threads are calling kni_net_process_request() ,
then the first one will take the sync lock, release rtnl lock then sleep.
The second thread will try to lock sync lock while holding rtnl.
The first thread will wake, and try to lock rtnl, resulting in a
deadlock. The remedy is to release rtnl before locking the KNI sync
lock.
Since in between nothing is accessing Linux network-wise, no rtnl
locking is needed.
B. There is a race condition in __dev_close_many() processing the
close_list while the application terminates.
It looks like if two KNI interfaces are terminating,
and one releases the rtnl lock, the other takes it,
updating the close_list in an unstable state,
causing the close_list to become a circular linked list,
hence list_for_each_entry() will endlessly loop inside
__dev_close_many() .
To summarize:
request != interface down : unlock rtnl, send request to user-space,
wait for response, send the response error code to caller in user-space.
request == interface down: send request to user-space, return immediately
with error code of 0 (success) to user-space.
Fixes: 3fc5ca2f63 ("kni: initial import")
Cc: stable@dpdk.org
Signed-off-by: Elad Nachman <eladv6@gmail.com>
Adding async userspace requests which don't wait for the userspace
response and always return success. This is preparation to address a
regression in KNI.
Signed-off-by: Elad Nachman <eladv6@gmail.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
