- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fixes memory leaks detected by Coverity. These are due to ephemeral
memory allocations not being freed when errors occur.
Coverity issue: 127348
Fixes: e2aae1c1ced9 ("ethdev: remove name from extended statistic fetch")
Signed-off-by: Remy Horton <remy.horton@intel.com>
SNOW3G and KASUMI unit tests are very similar and
they were using duplicated code, so this commit
refactor and remove some of the duplicated functions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
With the new libsso library, buffers can be encrypted/decrypted,
providing an offset in bits, so an extra unit test has been
added to cover this case.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Snow3G PMD supports now buffers that are non byte multiple,
so tests to cover this case have been added.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
No padding was added in the input buffers for snow3G tests,
due to a wrong calculation of the length (should be multiple
of the block size). This fix takes into account the case
where the length is not byte multiple.
Fixes: 8bdf665fe6c0 ("app/test: add SNOW 3G")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Instead of modifying the content of the buffers, to compare them
at bit-level, use the new macro TEST_ASSERT_BUFFERS_ARE_EQUAL_BIT,
which does not make any modifications in the buffers.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
In order to compare buffers with length and offset in bits,
new macros have been created, which use the previous compare function
to compare full bytes and then, compare first and last bytes of
each buffer separately.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Instead of using the previous RTE_APP_TEST_DEBUG macro,
to dump memory when it was enabled (with rte_hexdump),
a new TEST_HEXDUMP is defined, which will call rte_hexdump
if RTE_LOG_LEVEL is set to RTE_LOG_DEBUG.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Fixes: 202d375c60bc1 ("app/test: add cryptodev unit and performance tests")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
When RTE_APP_TEST_DEBUG is set, there were some errors:
app/test/test_cryptodev.c: In function ‘create_gcm_operation’:
app/test/test_cryptodev.c:3619:18: error: ‘struct rte_crypto_op’ has no member named ‘digest’
ut_params->op->digest.data,
^
app/test/test_cryptodev.c:3620:18: error: ‘struct rte_crypto_op’ has no member named ‘digest’
ut_params->op->digest.length);
^
app/test/test_cryptodev.c:3662:41: error: ‘struct rte_crypto_op’ has no member named ‘iv’
rte_hexdump(stdout, "iv:", ut_params->op->iv.data, iv_pad_len);
^
app/test/test_cryptodev.c:3664:17: error: ‘struct rte_crypto_op’ has no member named ‘additional_auth’
ut_params->op->additional_auth.data, aad_len);
Fixes: eec136f3c54fc ("aesni_gcm: add driver for AES-GCM crypto operations")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Cryptodev performance tests do not need to use any function
from rte_hexdump.h.
Fixes: 202d375c60bc1 ("app/test: add cryptodev unit and performance tests")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Updating the AES performance test in line with snow3g performance test.
Output format has been updated so as to get better understanding of numbers.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adding performance test for snow3g wireless algorithm.
Performance test can run over both software and hardware.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
This patch adds the HMAC-SHA224 and HMAC-SHA384 digest generation and
verification tests to crypto
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch reworks the crypto AES unit test by introducing a new unified
test function
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Using of the /dev/stdin generates a warning when compiling on FreeBSD:
objcopy: Warning: '/dev/stdin' is not an ordinary file
app/test/Makefile:78: recipe for target 'test_resource_c.res.o' failed
# ls -l /dev/stdin
lrwxr-xr-x 1 root wheel 4 Jun 17 12:24 /dev/stdin -> fd/0
Replace /dev/stdin by a temporary file.
Reported-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Tested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The objcopy and tar commands were printed even in quiet mode.
They are now replaced by a simple line and still visible in verbose mode.
Fixes: ab64f5df8004 ("app/test: support resources externally linked")
Fixes: 66819e6c11d8 ("app/test: support resources archived by tar")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Call rte_pdump_init and rte_pdump_uninit for packet
capturing initialization and uninitialization.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The new pdump tool is added for packet capturing on dpdk.
This tool runs as secondary process by default.
Tool facilitates the command line options like
port, device_id, queue which user should pass on
to the tool to request the packet capture on those devices.
Tool creates the rte ring, mempool and pcap vdev and
calls the enable API of the pdump library with port/device_id,
queue, ring and mempool as arguments to enable the packet
capture on specific devices and gets the packets from the
primary process over the ring. Once the packets are
received, those packets will be send to the pcap vdev.
Tool can be terminated by using ctrl+c(SIGINT) upon which tool
calls the disable API of the pdump library to disable the packet capture
and dequeues the rest of the packets from the ring and sends them on
to the pcap vdev, then after releases all allocated resources.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Calling rte_eth_dev_rss_hash_update without checking return value.
Fixed by handle return value and print out error status.
Coverity issue: 119251
Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch show topology at forwarding start.
"show config fwd" also does this, but showing it directly can reduce the
possibility of misconfiguration.
Currently fwd_config_display() calls fwd_config_setup(), this misleading
behavior will be fixed in other patches.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch removes constraints in rxq handling when multiqueue is enabled
to handle all the rxqs.
Current testpmd forces a dedicated core for each rxq, some rxqs may be
ignored when core number is less than rxq number, and that causes confusion
and inconvenience.
One example: an engineer was doing multiqueue test, there're 2
ports in guest each with 4 queues, and testpmd was used as the forwarding
engine in guest, as usual he used 1 core for forwarding, as a results he
only saw traffic from port 0 queue 0 to port 1 queue 0, then a lot of
emails and quite some time are spent to root cause it, and of course it's
caused by this unreasonable testpmd behavior.
Moreover, even if we understand this behavior, if we want to test the
above case, we still need 8 cores for a single guest to poll all the
rxqs, obviously this is too expensive.
We met quite a lot cases like this, one recent example:
http://openvswitch.org/pipermail/dev/2016-June/072110.html
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds throughput numbers (in the period since last use of this
command) in port statistics display for "show port stats (port_id|all)".
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch enables configurable tx_first burst number.
Use "start tx_first (burst_num)" to specify how many bursts of packets to
be sent before forwarding start, or "start tx_first" like before for the
default 1 burst send.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds retry option in testpmd to prevent most packet losses.
It can be enabled by "set fwd <mode> retry". All modes except rxonly
support this option.
Adding retry mechanism expands test case coverage to support scenarios
where packet loss affects test results.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Stop forwarding on exit whether all ports are started or not.
Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes: b6ea6408fbc7 ("ethdev: store numa_node per device")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Move call to init_fwd_streams from start_port function
to start_packet_forwarding function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add call to fwd_config_setup to init_config.
Add call to fwd_config_setup for corelist, coremask and nbcore setup.
Add call to fwd_config_setup for portlist, portmask and nbport setup.
Add call to fwd_config_setup for rxq, txq, rxd and txd setup.
Remove fwd_config_setup from fwd_config_display.
Call the pkt_fwd_config_display function directly,
and remove the fwd_config_display wrapper function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add new function port_is_bonding_slave
Use this function in stop_port and close_port functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add calls to port_is_forwarding function in stop_port and
close_port functions to check that port is not forwarding.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Do not update forwarding configuration when attaching or detaching a port
Remove checks on test_done variable.
Remove code to update forwarding configuration.
Fixes: edab33b1c01d ("app/testpmd: support port hotplug")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There are 2 new fake devices for testing PCI infra. All the fake devices
are now identified by non-existing vendor and device IDs so there is no
real driver to bind to them. The testing drivers match those IDs.
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The commit 66819e6 has introduced a dependency on libarchive to be able
to use some tar resources in the unit tests.
It is now an optional dependency because some systems do not have it
installed.
If CONFIG_RTE_APP_TEST_RESOURCE_TAR is disabled, the PCI test will not
be run. When a "configure" script will be integrated, the libarchive
availability could be checked to automatically enable the option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
Recent CPU's can easily wrap around a 32-bit unsigned int in
the mempool perf test. Increase to a 64-bit uint.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Bond device name was too long (grather than 32 signs) that
cause mempool allocation to fail.
Fixes: 92073ef961ee ("bond: unit tests")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
app/test/test_cryptodev.c:
In function ‘create_snow3g_cipher_operation_oop.clone.15’:
x86_64-native-linuxapp-gcc/include/rte_memcpy.h:796:14
error: array subscript is above array bounds.
In test_cryptodev.c:
2429 rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);
When iv_len is declared as 'unsigned int', rte_memcpy evaluates code for
buffer size bigger than 255, but while 'iv' array is 64 bytes long, it
causes 'above array bounds' warning in gcc 4.5 and breaks compilation.
Using uint8_t as a size of copied block prevents to evaluate in rte_memcpy
code for length bigger than 255, causing the problem.
The root of this issue and solution is the same as for commit 2c007ea10616
("app/test: fix array overflow warning with gcc 4.5")
Fixes: 9727af14b032 ("app/test: add out-of-place symmetric crypto operations")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
'red_autotest' changed to run only functional tests without test #4 which was
taking ~53 seconds. 'red_autotest' takes ~2[s] now.
'red_perf' has been added to run performance tests only).
'red_all' has been added to run all functional tests (including #4) and
perfromance tests. This reflects current 'red_autotest' behavior.
Other changes:
- machine TSC clock frequency detection takes place only once now.
- timeouts and number of iterations in functional tests have been reduced
in order to shorten test duration.
Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com>
Dumping of devices in a unittest is useless. Instead, test whether
the test has been set up well - i.e. there are no devices.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The SYSFS_PCI_DEVICES is a constant that makes the PCI testing
difficult as it points to an absolute path. We remove using this
constant and introducing a function pci_get_sysfs_path that gives
the same value. However, the user can pass a SYSFS_PCI_DEVICES env
variable to override the path. It is now possible to create a fake
sysfs hierarchy for testing.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The current test_pci is just a single test case that tests the
blacklisting of devices. Rename it to test_pci_blacklist and call it
from the test_pci. The setup and cleanup are moved out of the
test_pci_blacklist entirely to cover all other tests.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
