Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currenlty the encap/decap actions only support encapsulation
of VXLAN and NVGRE L2 packets (L2 encapsulation is where
the inner packet has a valid Ethernet header, while L3 encapsulation
is where the inner packet doesn't have the Ethernet header).
In addtion the parameter to to the encap action is a list of rte items,
this results in 2 extra translation, between the application to the
actioni and from the action to the NIC. This results in negative impact
on the insertion performance.
Looking forward there are going to be a need to support many more tunnel
encapsulations. For example MPLSoGRE, MPLSoUDP.
Adding the new encapsulation will result in duplication of code.
For example the code for handling NVGRE and VXLAN are exactly the same,
and each new tunnel will have the same exact structure.
This patch introduce a raw encapsulation that can support L2 tunnel types
and L3 tunnel types. In addtion the new
encapsulations commands are using raw buffer inorder to save the
converstion time, both for the application and the PMD.
In order to encapsulate L3 tunnel type there is a need to use both
actions in the same rule: The decap to remove the L2 of the original
packet, and then encap command to encapsulate the packet with the
tunnel.
For decap L3 there is also a need to use both commands in the same flow
first the decap command to remove the outer tunnel header and then encap
to add the L2 header.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
As described in [1], a new rte_flow item is added to support metadata
to use as flow rule match pattern.
The metadata is an opaque item, fully controlled by the application.
The use of metadata is relevant for egress rules only.
It can be set in the flow rule using the RTE_FLOW_ITEM_META.
An additional member 'tx_metadata' is added in union with existing member
'hash' of struct 'rte_mbuf', located to avoid conflicts with existing
fields. This additional member is used to carry the metadata item.
Application should set the packet metadata in the mbuf dedicated field,
and set the PKT_TX_METADATA flag in the mbuf->ol_flags.
The NIC will use the packet metadata as match criteria for relevant
flow rules.
This patch introduces metadata item type for rte_flow RTE_FLOW_ITEM_META,
along with corresponding struct rte_flow_item_meta and ol_flag
PKT_TX_METADATA.
[1] "[RFC,v2] ethdev: support metadata as flow rule criteria"
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_flow actions:
- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST
added in order to offload to NIC
The rte_flow_itme_eth must be present in rte_flow pattern
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
rewrite TTL by decrease or just set it directly
it's not necessary to check if the final result
is zero or not
This is slightly different from the one defined
by openflow and more generic
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This action is useful for offloading loopback mode, where the hardware
will swap source and destination MAC addresses in the outermost Ethernet
header before looping back the packet. This action can be used in
conjunction with other rewrite actions to achieve MAC layer transparent
NAT where the MAC addresses are swapped before either the source or
destination MAC address is rewritten and NAT is performed.
Must be used with a valid RTE_FLOW_ITEM_TYPE_ETH flow pattern item.
Otherwise, RTE_FLOW_ERROR_TYPE_ACTION error should be returned by the
PMDs.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add actions:
- SET_TP_SRC - set a new TCP/UDP source port number.
- SET_TP_DST - set a new TCP/UDP destination port number.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add actions:
- SET_IPV4_SRC - set a new IPv4 source address.
- SET_IPV4_DST - set a new IPv4 destination address.
- SET_IPV6_SRC - set a new IPv6 source address.
- SET_IPV6_DST - set a new IPv6 destination address.
Original work by Shagun Agrawal
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
No users left for this function, time to deprecate it.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This provides a means for applications to retrieve the name of flow
pattern items and actions.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
rte_flow_copy() is bound to duplicate flow rule descriptions
(attributes, pattern and list of actions, all at once), however
applications sometimes need more flexibility, for instance the ability
to duplicate only one of the underlying objects (a single pattern item
or action) or retrieve other properties such as their names.
Instead of adding dedicated functions to handle each possible use case,
this patch introduces rte_flow_conv(), which supports any number of
object conversion operations in an extensible manner.
This patch re-implements rte_flow_copy() as a wrapper to
rte_flow_conv().
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
