In FreeBSD, sys/types.h and netinet/in.h need to be included before
netinet/ip.h
There were missed typedef for u_char - <sys/types.h>
There were missed network definitions - <netinet/in.h>
Failure #13: http://dpdk.org/ml/archives/test-report/2016-March/001896.html
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Display extra crypto information (algorithms, keys/IV/AAD used, chain...),
so user can know exactly what operations are being carried out.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
In order to ease the parsing and display of supported algorithms
in the application, two new arrays are created, which contains
the strings of the different cipher and authentication algorithms,
These lists are used to parse the algorithms from the command line,
and will be used to display crypto information to the user.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Cipher/Auth keys, AAD and IV must be passed from command line
with ":" between bytes, but help was not clarifying that.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Some crypto algorithms support more than one key size
(including cipher key, authentication key, IV and AAD),
but the app was using always the minimum size.
These changes allows the user to use an specific size,
either from the string provided with cipher_key, auth_key, iv and ADD
parameters, or from the values provided with cipher_key_random_size,
auth_key_random_size, iv_random_size and aad_random_size.
This also allows the user to specify the digest size.
Fixes: 1df9c0109f ("examples/l2fwd-crypto: parse key parameters")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
App was generating a random IV/AAD of only 4 bytes,
instead of the actual length, since it was using sizeof(length).
Fixes: 27cf2d1b18 ("examples/l2fwd-crypto: discover capabilities")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When passing the preferred crypto device type in the command line
parameters, the string (HW/SW/ANY) was not being saved, which is used
for error information to the user.
Fixes: 27cf2d1b18 ("examples/l2fwd-crypto: discover capabilities")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
L2fwd-crypto app is based on L2fwd app and it inherits
some of its parameters (such as portmask, queues per core...).
The parameter period (period of time between statistic updates)
is -T in L2fwd, but was -t in L2fwd-crypto, so for consistency,
it is changed back to -T
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When compiling dpdk_qat app with an i686 target on a x86_64 OS,
an error message was shown, saying that it can only be built
on a 32-bit OS, which should be i686 OS, as other 32-bit OS
are not supported.
Fixes: 3460012bcc ("examples/qat: update")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added AES and snow3g Authenticated encryption and decryption tests
for out-of-place operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
This patch adds out-of-place operations to qat symmetric crypto PMD,
i.e. the result of the operation can be written to the destination buffer
instead of overwriting the source buffer as done in "in-place" operation.
Both buffers can be of different sizes.
Previously the qat PMD assumed that m_src and m_dst in rte_crypto_sym_op
were identical.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
In SUSE11-SP3 i686 platform, with gcc 4.5.1, there are compile issues, e.g:
null_crypto_pmd_ops.c:44:3: error:
unknown field 'sym' specified in initializer
cc1: warnings being treated as errors
The member in anonymous union initialization should be inside '{}',
otherwise it will report an error.
Fixes: 26c2e4ad5a ("cryptodev: add capabilities discovery")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
In SUSE11-SP3 i686 platform, with gcc 4.5.1, there is a
compile issue:
rte_lpm.c: In function ‘add_depth_small_v20’:
rte_lpm.c:778:7: error: unknown field ‘next_hop’
specified in initializer
The root cause is gcc only allow anonymous union initialized
according to the field it is defined. But next_hop is defined
in different field when in different platform(Endian).
One solution is add if define in the code to avoid this issue,
but there is a simple way, initialize it separately later.
Fixes: afc5c914a0 ("lpm: fix big endian support")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
These asserts are only for debugging and never fired during
any testing, but they confuse coverity's null tracking.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yong Wang <yongwang@vmware.com>
Silence a compiler warning that this variable may be used uninitialized.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tell the compiler to use an unsigned constant for the config shifts.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tell the compiler to use an unsigned constant for the config shifts.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The device lsc interrupt check has a misleading whitespace around it which
can be improved by adding appropriate braces to the check. Since the ret
variable was checked after previous assignment, this introduces no functional
change.
Fixes: 921a72008f ("e1000: add Rx interrupt handler")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The register read/write mphy functions have misleading whitespace around
the `locked` check. This cleanup merely preserves the existing functionality
and suppresses future gcc versions' "misleading indentation" warning.
Suggested-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The test application calls printf(...) with the suite->suite_name argument.
The intent (based on whitespace) in the printf is to check suite->suite_name
first and then apply the printf. This doesn't happen due to missing brackets.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
If the provided configuration does not call for RSS, then RSS is
explicitly disabled. Without this change, the device continues to
operate under the previous RSS configuration.
Fixes: 57033cdf8f ("fm10k: add PF RSS")
Signed-off-by: Michael Frasca <michael.frasca@oracle.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Now that vmxnet3 supports TCP/UDP checksum offload, let's update
the default txq flags to allow such offloads. Also fixed the tx
queue setup check to allow TCP/UDP checksum and only error out
if SCTP checksum is requested.
Fixes: f598fd063b ("vmxnet3: add Tx L4 checksum offload")
Reported-by: Heng Ding <hengx.ding@intel.com>
Signed-off-by: Yong Wang <yongwang@vmware.com>
The NFP driver (unlike other PCI devices) was not copying the pci info
from the pci_dev to the eth_dev. This would make the driver_name be
null (and other unset fields) when application uses dev_info_get.
This was found by code review; do not have the hardware.
Fixes: d4a27a3b09 ("nfp: add basic features")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When the number of RX queues is not a power of two,
the RETA table is configured to its maximum size for
better balancing.
Testing showed that limiting its size to 256 improves performance
noticeably with little to no impact on balancing results.
Fixes: ebb30ec64a ("mlx5: increase RETA table size")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Once freed, completed mbufs pointers are not set to NULL in the TX queue.
Clean up function must take this into account.
Fixes: 2e22920b85 ("mlx5: support non-scattered Tx and Rx")
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Calling rte_eth_dev_get_dcb_info to get dcb info from i40e
driver if VMDQ is disabled, results in a segmentation fault.
This patch fixes it by treating VMDQ and No-VMDQ respectively
when querying dcb information.
Fixes: 5135f3ca49 ("i40e: enable DCB in VMDQ VSIs")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The lower 16 bits of EICR register are used for queue interrupts,
dpdk framework take over the first bit for other interrupts like
LSC, so there're only 15 bits left for queue interrupts mapping.
This patch adds a check for the num of interrupt queues at
dev_start.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When starting testpmd with multiple queues on a ixgbe VF
port, it failed with this printing, "nb_rxq(4) is greater
than max_rx_queues(1)".
The root cause is the VF doesn't get the right max rx queue
number from PF and it uses the default value 1.
VF max rx queue number is set by PF through mailbox messages.
The message for this setting only supports version 1.1. As
message version is updated to 1.2, VF cannot parse the rx queue
number setting message correctly.
This patch raise a specific base code update for this issue.
Fixes: 72dec9e37a ("ixgbe: support multicast promiscuous mode on VF")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update the 'imissed' counter with the number of packets dropped
by the NIC.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
When the enic was disabled, link notification was correctly disabled
in the NIC but the software indicator that it was disabled was not
updated (vdev->notify_pa not set to 0). When the link came back up,
enic did not re-enable notification in the NIC.
This affected bonding when a enic slave device link bounced.
The fix is to unconditionally enable notification when the enic is
enabled.
Fixes: 9913fbb91d ("enic/base: common code")
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Nelson Escobar <neescoba@cisco.com>
If the nb_pkts parameter to rte_eth_tx_burst() was greater than
the TX descriptor count, a completion was not being requested
from the NIC, so descriptors would not be released back to the
host causing a lock-up.
Introduce a limit of how many TX descriptors can be used in a single
call to the enic PMD burst TX function before requesting a completion.
Fixes: d739ba4c6a ("enic: improve Tx packet rate")
Signed-off-by: John Daley <johndale@cisco.com>
FreeBSD was not defined in ena_plat.h
ETIME is not defined in FreeBSD.
In file included from DPDK/drivers/net/ena/base/ena_com.h:37:0,
from DPDK/drivers/net/ena/ena_ethdev.h:39,
from DPDK/drivers/net/ena/ena_ethdev.c:41:
DPDK/drivers/net/ena/base/ena_plat.h:48:2: error: #error "Invalid platform"
Fixes: 99ecfbf845 ("ena: import communication layer")
Fixes: 9ba7981ec9 ("ena: add communication layer for DPDK")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fix for multiple compilation errors for ICC:
error #188: enumerated type mixed with another type
error #592: variable "flags" is used before its value is set
Fixes: 99ecfbf845 ("ena: import communication layer")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
This patch fixes comments for tunnel filters and flow director flows.
e.g. states fields which are in big endian.
Fixes: 7b1312891b ("ethdev: add IP in GRE tunnel")
Fixes: d69be32d4d ("ethdev: structures to add or delete flow director")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Previously, vector driver is not the first (default) choice for i40e,
as it cannot fill packet type info for l3fwd to work well. Now there
is an option for l3fwd to analysis packet type softly. So enable it
by default.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As a example to use ptype info, l3fwd needs firstly to use
rte_eth_dev_get_supported_ptypes() API to check if device and/or
its PMD driver will parse and fill the needed packet type; if not,
use the newly added option, --parse-ptype, to analyze it in the
callback softly.
As the mode of EXACT_MATCH uses the 5 tuples to caculate hash, so
we narrow down its scope to:
a. ip packets with no extensions, and
b. L4 payload should be either tcp or udp.
Note: this patch does not completely solve the issue, "cannot run
l3fwd on virtio or other devices", because hw_ip_checksum may be
not supported by the devices. Currently we can:
a. remove this requirements, or
b. wait for virtio front end (pmd) to support it.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added validation for queue id of config parameter tuple.
This validation enforces user to enter queue ids of a port
from 0 and in sequence.
This additional validation on queue ids avoids ixgbe crash caused
by null rxq pointer access inside ixgbe_dev_rx_init.
Reason for null rxq is, L3fwd application allocates memory only for
queues passed by user. But rte_eth_dev_start tries to initialize rx
queues in sequence from 0 to nb_rx_queues,
which is not true and coredump while accessing the unallocated queue .
Fixes: af75078fec ("first public release")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
While the last arg of virtio_tx_route() asks a vlan tag, we currently
feed it with device_fh, which is wrong. Fix it.
Fixes: 4796ad63ba ("examples/vhost: import userspace vhost application")
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Comments for PKT_TX_TCP_SEG at rte_mbuf says that we should only set
PKT_TX_IP_CKSUM and reset ip hdr checksum for IPv4:
- if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum
to 0 in the packet
Fixes: 9fd72e3cbd ("examples/vhost: add virtio offload")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
For checksum offloading only case, the TCP/IP stack would
have calculated the pseudo checksum. Therefore, we don't
need to re-calculate it again here; remove it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Build log:
/root/dpdk/app/test-pmd/cmdline.c:6687:45: error: no member named
's6_addr32' in 'struct in6_addr'
rte_be_to_cpu_32(res->ip_value.addr.ipv6.s6_addr32[i]);
This is caused by macro "s6_addr32" not defined on FreeBSD and testpmd
swap big endian parameter to host endian. Move the swap action to i40e
ethdev will fix this issue.
Fixes: 7b1312891b ("ethdev: add IP in GRE tunnel")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
The code uses "entry" in the next loop of LIST_FOREACH after calling free()
on it in i40e_res_pool_destroy().
Change to a safe way to free entry, which is similar with LIST_FOREACH_SAFE
in FreeBSD.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Jiangu Zhao <zhaojg@arraynetworks.com.cn>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
