No need to add additional vlan tag size for max packet size, since
for i40e, the queue's Rx Max Frame Size (rxq->max_pkt_len) already
includes the vlan header size.
Fixes: a3c83a2527 ("net/i40e: enable runtime queue setup")
Fixes: 4861cde461 ("i40e: new poll mode driver")
Fixes: c1715402df ("i40evf: fix jumbo frame support")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Add new protocol type VXLAN-GPE support for UDP tunnel.
inner IP/TCP/UDP checksum and RSS configuration shared
the same implementation of VXLAN.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit sets the min and max supported MTU values for i40e VF
devices via the i40evf_dev_info_get() function. Min MTU supported
is set to ETHER_MIN_MTU and max MTU is calculated as the max packet
length supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for i40e devices
via the i40e_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max mtu is calculated as the max packet length
supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A log message is required when provided RSS key is
not valid so that driver will use the default RSS key.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
strcat does not check the destination length and there might be
chances of string overflow so instead of strcat, strlcat is used.
Fixes: 540a211084 ("bnx2x: driver core")
Fixes: e163c18a15 ("net/i40e: update ptype and pctype info")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Time sync increment value is not configured for 25G device.
The patch fix this issue by setting the same value as 40G, this
aligned with kernel driver's behaviour.
Fixes: 75d133dd32 ("net/i40e: enable 25G device")
Cc: stable@dpdk.org
Reported-by: Michael Luo <michael.luo@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Michael Luo <michael.luo@intel.com>
Since rounding up the requested queue pairs to allow the VF to
request a non-aligned number was added, it may happen that the
requested number is less than the available num of queues but the
rounded up number is greater. In this case, it is not caught with
the usual checks but later when there is a reset and failed setup.
By rounding earlier the checks can be done before a failed reset
occurs, and a rounded max amount of available queues can be returned
to the VF.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the check and associated log. Also, fix a typo in other log.
Fixes: 03d478e960 ("net/i40e: support PF respond VF request more queues")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Fix the lldp stop condition check - for firmware
versions 6.01(for X710)/3.33(for X722) or later we need stop the lldp
2. deferred stats reset in dev_init to avoid some noise be counted.
3. Document known issue for tx bytes decreasing due to link status change
Fixes: 044846f071 ("net/i40e: stop LLDP before setting local LLDP MIB")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
DCB is not necessary to be configured if no user priority of
queue region is requested.
Unexpected configuration of DCB will cause unexpected behavior, like
FDIR does not work on those queues, but could cause more issues.
Fixes: 7cbecc2f74 ("net/i40e: support queue region set and flush")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Before this patch, VF must request a specific queues(1/2/4/8/16) with
DPDK PF. This patch align the number of requested queues to next power
of 2. So VF can request any number queues from 1 to 16.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
i40e_aq_set_rss_lut should set register according
to the vsi->type. if not, VF may overwrite the rigister
of PF.
Note, only X722 is impacted, since flag I40E_FLAG_RSS_AQ_CAPABLE
is only enabled on X722.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Do the VF message basic validation such as OPCODE message length check,
some special OPCODE message format check, to protect the i40e PMD from
malicious VF message attack.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
rte_eth_dev_rss_hash_conf_get API doesn't force 'rss_conf.rss_key'
to be not NULL, so rss_key = NULL should be alllowed in i40e
driver.
Fixes: 16321de093 ("ethdev: allow to get RSS hash functions and key")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch respond the VIRTCHNL_OP_REQUEST_QUEUES msg from VF, and
process to allocated more queues for the requested VF. If successful,
PF will notify VF to reset. If unsuccessful, PF will send message to
inform VF.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Before this patch, VF gets a default number of queues from the PF.
This patch enables VF to request a different number. When VF configures
more queues, it will send VIRTCHNL_OP_REQUEST_QUEUES to PF to request
more queues, if success, PF will reset the VF.
User can run "port stop all", "port config port_id rxq/txq queue_num"
and "port start all" to reconfigure queue number.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
While calculating the input packet count per port, discarded packets
should be reduced, right now only PF VSI discarded packets are reduced.
But while calculating the input byte count per port, Rx byte count is
used, which should take all discarded packets into account, including
VF VSI ones.
This will cause inconsistency in stat counters in some cases.
This patch would take all VSI stats as packet and byte count to address
the issue.
Fixes: 763de290cb ("net/i40e: fix packet count for PF")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The reset flags vf->vf_reset and vf->pend_msg are set when VF received
VIRTCHNL_EVENT_RESET_IMPENDING. So after resetting done, these flags
should be cleared.
Fixes: 8cacf78469 ("net/i40e: fix VF initialization error")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Before this patch, there are two functions will call
i40e_dev_free_queues to free queues. For rte_eth_dev_close(), its
redundant because of duplication. For rte_eth_dev_reset() its
redundant because of not necessary, since following dev_configure
is required after dev_reset and it will be updated correctly.
This patch removes redundant code in i40e_dev_free_queues().
Fixes: 6b45371283 ("i40e: free queue memory when closing")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This reverts
commit 09a62d7569 ("net/i40e: fix offload not supported mask")
Contrary to what is said in above patch commit log,
I40E_TX_OFFLOAD_NOTSUP_MASK is the mask of Tx offload bits that are part
of PKT_TX_OFFLOAD_MASK but not included in I40E_TX_OFFLOAD_MASK.
Above patch erroneously includes all PKT_RX_OFFLOAD_ bits in the
I40E_TX_OFFLOAD_NOTSUP_MASK, this is not what is expected.
Restore the initial xor that gives the expected result.
Fixes: 09a62d7569 ("net/i40e: fix offload not supported mask")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Port reset will call i40evf_uninit_vf() to release resource. It wants
to call i40evf_dev_close() to release resources. Before this patch,
hw->adapter_stopped was used to mark the status about start/stop and
close. So it will never call i40evf_dev_close() after stopping the port.
This patch added hw->adapter_closed flag in i40evf_dev_close() and
i40e_dev_close() to control the status of close.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When starting the device, the RSS table is initialized. So the RSS
update before dev_start would be overwritten. This patch allows users
to update the RSS reta table before dev_start and adjusts the order
to set entries sequentially.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Device can't function properly with a firmware that is in recovery
mode.
Check the firmware status at initialization time. If the firmware is
in recovery mode, alert the user to check it.
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS hash configure get API (i40e_dev_rss_hash_conf_get()) didn't check
the return value of i40e_get_rss_key().
i40e_dev_rss_hash_conf_get() will return success even getting RSS hash
key failed. This patch fixes the issue.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
DCR is Intel internal information, no need to be in public code.
Fixes: de2cd512b1 ("net/i40e/base: new AQ commands for cloud filter")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The assignment should be done after initialization, or it will be zero.
Fixes: 264b23e3d2 ("net/i40e: add parameter check for RSS flow init")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There's an issue that X710 can't receive any packet after
reading some special registers. That's because these
registers are only valid for X722, read access for non-X722
will cause ECC error.
Fixes: d9efd0136a ("i40e: add EEPROM and registers dumping")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There need an parameter check for RSS flow init, or it may cause
core dump if pointer is NULL in memory copy.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Previously, there is instability during vector Rx if descriptor
number is not power of 2, e.g. process hang and some Rx packets
are unexpectedly empty. That's because vector Rx mode assumes Rx
descriptor number is power of 2 when doing bit mask.
This patch allows vector mode only when the number of Rx descriptor
is power of 2.
Fixes: 8e109464c0 ("i40e: allow vector Rx and Tx usage")
Fixes: a3c83a2527 ("net/i40e: enable runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Just as the name I40E_TX_OFFLOAD_NOTSUP_MASK indicates, it should be the
mask of unsupported features (either not in PKT_TX_OFFLOAD_MASK or in
I40E_TX_OFFLOAD_MASK), however, xor will not get desired result here,
assume bit 0 of PKT_TX_OFFLOAD_MASK and I40E_TX_OFFLOAD_MAKS are 0 which
means corresponding feature is not supported in both sides, then we get
value of bit 0 of I40E_TX_OFFLOAD_NOTSUP_MASK which is 0 via xor, it
implies that it is supported which doesn't meet our expectation.
Correct it by a NOT-AND operation.
Fixes: 3f33e643e5 ("net/i40e: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
NICs uses different delays up to a second during their
configuration. It makes no sense to busy-wait so long wasting
CPU cycles and preventing any other threads to execute on the
same CPU core. These busy polling are the rudiments that came
from the kernel drivers where you can not sleep in interrupt
context, but as we're in userspace, we're able and should
sleep to allow other threads to run.
Delays never called on rx/tx path, so this should not affect
performance.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tx offload mask is updated in following commit:
commit 1037ed842c ("mbuf: fix Tx offload mask").
Currently, the new added offload flags are not supported in PMD
and application will fail to call PMD transmit prepare function.
This patch updates PMD Tx offload mask.
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some operations in i40evf_dev_close like i40evf_dev_promiscuous_disable
still need alarm handler to clear the pending cmd, if alarm handler is
canceled in early stage of i40evf_dev_close,
i40evf_dev_promiscuous_disable will result in failure.
Fixes: 864a800d70 ("net/i40e: remove VF interrupt handler")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
In FVL, there was an issue and it didn't support the loopback function
before FW 5.0. For FPK (X722) it should work.
So it needs to distinguish between the devices by checking MAC type.
Fixes: 689bba3327 ("i40e: add VEB switching support")
Fixes: bce83974ba ("net/i40e: set Tx loopback from PF")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The representor id is added in rte_eth_dev_data in order to be able
to match a port with its representor id in devargs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Promisc should not be disabled if the all multicast mode is enabled.
Patch keeps the promiscuous on if all multicast mode is on, this
behavior is also consistent with the implementation done on ixgbe
pmd.
Cc: stable@dpdk.org
Signed-off-by: Huaibin Wang <huaibin.wang@6wind.com>
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
eal: add shorthand __rte_weak macro
qat: update code to use __rte_weak macro
avf: update code to use __rte_weak macro
fm10k: update code to use __rte_weak macro
i40e: update code to use __rte_weak macro
ixgbe: update code to use __rte_weak macro
mlx5: update code to use __rte_weak macro
virtio: update code to use __rte_weak macro
acl: update code to use __rte_weak macro
bpf: update code to use __rte_weak macro
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The PCI mapping requires to know the PCI driver to use,
even before the probing is done. That's why the PCI driver is
referenced early inside the PCI device structure. See
commit 1d20a073fa ("bus/pci: reference driver structure before mapping")
However the rte_driver does not need to be referenced in rte_device
before the device probing is done.
By moving back this assignment at the end of the device probing,
it becomes possible to make clear the status of a rte_device.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Update implementation that when PKT_RX_QINQ_STRIPPED mbuf ol_flags
set by PMD, PKT_RX_QINQ, PKT_RX_VLAN_STRIPPED & PKT_RX_VLAN
should be also set.
Clarify mbuf documentations that when PKT_RX_QINQ set PKT_RX_VLAN also
should be set.
So that appllication can rely on PKT_RX_QINQ flag to access both
mbuf.vlan_tci & mbuf.vlan_tci_outer
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
I40e driver needed users to config exact fdir mode to create rte_flow
rules but it shouldn't. This patch allows users to create rte_flow rules
without configuring fdir mode and let the driver config fdir automatically.
And remove the workaround in flow filtering example.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Since rte_intr_enable is called at init and start time. Remove it in
interrupt_action function to avoid too many system calls.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There is a new set of TR bits that can be used when replacing
the cloud filters so add them in. Also added a check to make
sure that the replace cloud filters AQ command doesn't get
executed on an X722 since it is not supported there.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
