In former API, ETH_TXQ_FLAGS_NOMULTSEGS was merely a hint indicating
that application will never send multisegmented packets, allowing
pmd to choose different tx methods accordingly.
In new API, DEV_TX_OFFLOAD_MULTI_SEGS became an offload capability
that is advertised by pmds, some of them do not advertise it and
expect to never receive fragmented packets (octeontx, axgbe)
So an ethdev that supports multisegmented packets should properly
advertise it.
Problem was spotted and tested on e1000, should be also present in
ixgbe_vf representor.
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Check the firmware status at init time. If the firmware is in
recovery mode, alert the user to check it.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use ixgbe_identify_sfp_module_X550em to update SFP identification
flow. ixgbe_identify_sfp_module_X550em includes specific checks for
X550 about supported SFP modules.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Replace "=" operation with "|=" operation to only set the intended
register bits.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add FM NVM recovery mode check. Allow the software to detect this.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Cleanup UNREFERENCED_1PARAMETER() macro because "hw" is used.
And remove Light Spring codes because the device was never
productised. And cleanup unused bypass codes.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Update the GPL and BSD license headers to use the SPDX License
Identifier instead.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The driver setting of "allow_experimental_apis" was not being used when
building the base code. To allow this we can manually put in a check
in the base code files for the setting and set the appropriate cflag
if it's needed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Ilya Maximets <i.maximets@samsung.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
In case of a temporary failure the ixgbe driver can return the internal
error IXGBE_ERR_RESET_FAILED to the application. Instead, return
-EAGAIN as per the public API specification.
Fixes: cddaf87a1e ("lib: fix unused values")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add missing NULL point check inside ixgbe_pf_host_uninit, or it may cause
segment fault when detaching a device.
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
remove queue id checks from dev_ops
ixgbe_dev_[rx/tx]_queue_[start/stop]
queue id checks already done by ethdev APIs that are calling these
dev_ops
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch adds the values for the ixgbe PMD.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
MAC address bits in mask registers should be set to zero
when the is mac mask is 0xFF, otherwise if it is 0x0
these bits should be to 0x3F.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tunnel type format should be translated to ixgbe required format
before register set in FDIR cloud mode, Ans also some register
not useful in cloud mode but only useful in IP mode should be set
to zero as datasheet request.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In cloud mode for FDIR, tunnel id should be set as protocol
request, the lower 8 bits should be set as reserved.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In IP mode FDIR, X550 can support not only 4 tuple parameters
but also vlan tci in protocol, so add this feature to flow parser.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There are many registeres in x550 support stats of
flow director filters, for example the number of added
or removed rules and the number match or miss match packet
count for this for port, all these important information
can be read form registeres in x550 and display with command
xstats.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When detaching a port bound to ixgbe PMD, if the port
does not have any VFs, *vfinfo is not set and there is
a NULL dereference attempt, when calling
rte_eth_switch_domain_free(), which expects VFs to be used,
causing a segmentation fault.
Steps to reproduce:
./testpmd -- -i
testpmd> port stop all
testpmd> port close all
testpmd> port detach 0
Bugzilla ID: 57
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Reported-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Since we move to new offload APIs, IXGBE_SIMPLE_FLAGS is not used.
Fixes: 51215925a3 ("net/ixgbe: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The old ixgbe_vlan_offload_set() is called by
rte_eth_dev_set_vlan_offload() which is meant to config VLAN
strip/filter/extend on all queues.
This old function is also called by rte_eth_dev_start()/ixgbe_dev_start()
which need support per-queue VALN strip on only parts of queues.
So add new function ixgbe_vlan_offload_config() =
old ixgbe_vlan_offload_set().
This new function is called by ixgbe_dev_start() to support VLAN strip
per-queue configuration.
New ixgbe_vlan_offload_set() = codes to align VLAN strip flags on all
queues with port level setting + new ixgbe_vlan_offload_configure().
The 2nd function is called by rte_eth_dev_set_vlan_offload to support
configure VLAN strip on all queues of whole port.
Fixes: 216f78f4d5 ("net/ixgbe: support VLAN strip per queue offloading in PF")
Fixes: 860a94d3c6 ("net/ixgbe: support VLAN strip per queue offloading in VF")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch removes unnecessary check in ixgbe_check_mq_mode, which
fixes the DCB configuration issue.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support kernel VF, PBA bit is always set. But it may
cause the too many interrupts issue on specific Linux
kernel versions, e.g. 4.4.0-116.
PF host should set the auto clean, mask and throttling
as we always set the register for kernel VF.
Fixes: 6b75183ac4 ("net/ixgbe: fix wrong PBA setting")
Cc: stable@dpdk.org
Signed-off-by: Michael Luo <michael.luo@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds Rx and Tx burst functions to the ixgbe
Port Representors, so that the implementation within
ixgbe PMD can be tested using applications such as
testpmd which require data-path functionality.
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
If dpdk APPs call the rte_eth_dev_rx_intr_enable or
rte_eth_dev_rx_intr_disable frequently, and ixgbe vf will read
the IXGBE_VTEIMS register everytime. The patch saves the IXGBE_VTEIMS
to mask to avoid read frequently.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
The ixgbe PF and VF use the same default value
for EITR defined in header file.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Set EITR interval as default. This patch can improve the
performance when we enable the rx-interrupt to process the
packets because we hope rx-interrupt reduce CPU. For example,
the 200us value of EITR makes the performance better with
the low CPU. The default value of ITR is 500us, compatible
with RSC of ixgbe PF, and next patch will use the default value.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add ixgbe API to enable SBP bit in FCTRL register
to allow receiving packets that may otherwise be
considered length errors by ixgbe and dropped
Signed-off-by: Shweta Choudaha <shweta.choudaha@att.com>
Reviewed-by: Chas Williams <chas3@att.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since we move to new offload APIs, txq_flags is no long needed.
This patch remove the dependence on that.
Fixes: 51215925a3 ("net/ixgbe: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Initialise rte_ethdev_args parameters to zero to handle
the case where no devargs are passed to the IXGBE PF on
device probe, so that there is no invalid attempts to create
representor ports.
Coverity Issue: 277231
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Changes introduced by cf80ba6e20 modified the default name generated
for the IXGBE PF PMD, this patch reverts the default name to the
original PCI BDBF.
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for virtual function representor ports to the ixgbe PF
driver. When SR-IOV virtual functions devices are enabled a
corresponding representor port for each VF can be enabled in the
process in which the ixgbe PMD is running within, by specifying the
representor devargs with the list of VF ports that representors
are to be created for.
An example of the devargs which would create VF representor for virtual
functions 0,2,4,5,6 and 7 is:
-w DBDF,representor=[0,2,4-7]
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
TPID handling in rte_flow VLAN and E_TAG pattern item definitions is not
consistent with the normal stacking order of pattern items, which is
confusing to applications.
Problem is that when followed by one of these layers, the EtherType field
of the preceding layer keeps its "inner" definition, and the "outer" TPID
is provided by the subsequent layer, the reverse of how a packet looks like
on the wire:
Wire: [ ETH TPID = A | VLAN EtherType = B | B DATA ]
rte_flow: [ ETH EtherType = B | VLAN TPID = A | B DATA ]
Worse, when QinQ is involved, the stacking order of VLAN layers is
unspecified. It is unclear whether it should be reversed (innermost to
outermost) as well given TPID applies to the previous layer:
Wire: [ ETH TPID = A | VLAN TPID = B | VLAN EtherType = C | C DATA ]
rte_flow 1: [ ETH EtherType = C | VLAN TPID = B | VLAN TPID = A | C DATA ]
rte_flow 2: [ ETH EtherType = C | VLAN TPID = A | VLAN TPID = B | C DATA ]
While specifying EtherType/TPID is hopefully rarely necessary, the stacking
order in case of QinQ and the lack of documentation remain an issue.
This patch replaces TPID in the VLAN pattern item with an inner
EtherType/TPID as is usually done everywhere else (e.g. struct vlan_hdr),
clarifies documentation and updates all relevant code.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Summary of changes for PMDs that implement ETH, VLAN or E_TAG pattern
items:
- bnxt: EtherType matching is supported with and without VLAN, but TPID
matching is not and triggers an error.
- e1000: EtherType matching is only supported with the ETHERTYPE filter,
which does not support VLAN matching, therefore no impact.
- enic: same as bnxt.
- i40e: same as bnxt with existing FDIR limitations on allowed EtherType
values. The remaining filter types (VXLAN, NVGRE, QINQ) do not support
EtherType matching.
- ixgbe: same as e1000, with additional minor change to rely on the new
E-Tag macro definition.
- mlx4: EtherType/TPID matching is not supported, no impact.
- mlx5: same as bnxt.
- mvpp2: same as bnxt.
- sfc: same as bnxt.
- tap: same as bnxt.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add new callbacks for eth_dev_ops of ixgbe to get the information
and data of plugin module eeprom.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Update link status related feature document items and minor updates in
some link status related functions.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch fixes a segment fault in ixgbevf_vlan_offload_set( )
when a Rx queue with index < max_rx_queues is not setup.
For such queue, rxq = dev->data->rx_queues[i] is null pointer.
Fixes: 860a94d3c6 ("net/ixgbe: support VLAN strip per queue offloading in VF")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Xueqin Lin <xueqin.lin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds missing supported Tx multi-segs offloading.
Fixes: 51215925a3 ("net/ixgbe: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add ixgbe MDIO lock/unlock and access APIs to read and write registers
using specific device address. This provides MDIO access to any devices
that are not associated with the autoprobed PHY.Export these APIs via
the map file
Signed-off-by: Shweta Choudaha <shweta.choudaha@att.com>
Reviewed-by: Chas Williams <chas3@att.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The new functions for Rx and Tx offloads should not be inside the
conditional block for the vector driver, otherwise compile errors occur
when vector driver is disabled. For example:
ixgbe_ethdev.c:3636:36: error:
implicit declaration of function ‘ixgbe_get_rx_queue_offloads’;
This shows up as an error when doing ARM builds using meson as the vector
driver is not (yet) enabled for those builds.
Fixes: 51215925a3 ("net/ixgbe: convert to new Tx offloads API")
Fixes: ec3b1124d1 ("net/ixgbe: convert to new Rx offloads API")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
With icc (ICC) 18.0.1 20171018, -wd usage generates following warning:
icc: command line remark #10010: option '-wd3656' is deprecated and will
be removed in a future release. See '-help deprecated'
"icc -help deprecated" output is:
-wd use -diag-disable
Based on above information "-wd" converted to "-diag-disable"
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch adds support for explicitly selecting 2.5G and 5G speeds on
X550.
Signed-off-by: Martin Weiser <martin.weiser@allegro-packets.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
dev->data->eth_link isn't updated until the first interrupt. If a
link is carrier down, then this interrupt may never happen. Before we
finished starting the PMD, call ixgbe_dev_link_update() to ensure we
have a valid status.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If we haven't set wait_to_complete, there is no need to busy wait
until we have a link status. Applications, like bonding, use the
wait_to_complete flag to indicate that they will be doing their own
busy wait and will likely be polling again shortly.
Fixes: dc66e5fd01 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN strip is a per queue offloading in VF. With this patch
it can be enabled or disabled on any Rx queue in VF.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
VLAN strip is a per queue offloading in PF. With this patch
it can be enabled or disabled on any Rx queue in PF.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The nic's interrupt source has some active callbacks, when
the port hotplug. Add a retry to give more port's a chance
to uninit before returning an error.
Fixes: 2866c5f1b8 ("ixgbe: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
testpmd needs to get CRC strip offload from rx_offload_capa with a
recent change. This patch adds CRC strip flag to rx_offload_capa
for ixgbe and ixgbevf, as they have the capability.
Fixes: 8b9bd0efe0 ("app/testpmd: disable Rx VLAN offloads by default")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.
The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add the e1000, fm10k, i40e and ixgbe drivers to the meson & ninja build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
When using UIO, after enabling the interrupt to get the PF
message, VF RX queue interrupt is not working.
It's expected, as UIO doesn't support multiple interrupt.
So, PMD should not try to enable RX queue interrupt. Then
APP can know the RX queue interrupt is not enabled and only
choose the polling mode.
Fixes: 77234603fb ("net/ixgbe: support VF mailbox interrupt for link up/down")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Check if the security enable bits are not fused before setting
offload capabilities for security.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Increase the internal limit for flow types from 32 to 64
to support future flow type extensions.
Change type of variables from uint32_t[] to uint64_t[]:
rte_eth_fdir_info.flow_types_mask
rte_eth_hash_global_conf.sym_hash_enable_mask
rte_eth_hash_global_conf.valid_bit_mask
This modification affects the following components:
net/i40e
net/ixgbe
app/testpmd
ABI versioning used to keep ABI stability.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mailbox interrupt handler only takes care of PF reset notification, for
other message ixgbe_read_mbx should not be called since it gets chance
to break the foreground VF to PF communication.
This can be simply repeated by 'testpmd>rx_vlan rm all 0'.
Fixes: 77234603fb ("net/ixgbe: support VF mailbox interrupt for link up/down")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
VF can't run in multiple queue mode, if nb_q_per_pool is set to 1.
Nb_q_per_pool is passed through to max_rx_q and max_tx_q in VF.
So if nb_q_per_pool is equal to 1, max_rx_q and max_tx_q shouldn't
be more than 1, otherwise VF multiple queue mode will fail.
RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool is the Max number of queue can be
used in VF, that would be assigned as IXGBE_MAX_RX_QUEUE_NUM /
RTE_ETH_DEV_SRIOV(dev).active, so that assigning nb_q_per_pool as 1
when PF is in ETH_MQ_RX_NONE, which will make VF can just use only 1
queue, is not right.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch mainly adds/removes comments for function parameters
that were missing or no longer needed.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch clears software resource bits in synchronization
register and updates host interface resource bit error case for
X540. It also fixes compile warnings of using GCC 7.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
With this patch, it uses 2 bytes of buffer reading, as required
for flash read command. It also adds definitions for LESM module.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds lockless read/write support for clause 22 PHY,
together with some enhancements for link speed and return value
handling.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Increase SECRX_RDY polling frequency and semaphore timeout which
fixes the FWSW.PT check in ixgbe_mng_present().
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add common functions for getting OEM product version, option
ROM version, and ETrack id.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tx_q check fails when the SRIOV is active and tx_q > rx_q. It has
to use the maximum HW queue number for calculation, to get the
right number of queue can be used.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Rte_flow was defined to include RSS, this patch moves ixgbe
existing RSS to rte_flow. The old RSS configuration is kept
as it was, and can be deprecated in the future.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch fixes the issue of mask check in NVGRE parser
for flow API.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add a mode type check for tunnel mode, if FDIR is in this mode,
it does not need to do sanity check for x550.
Fixes: a2ba854ec6 ("net/ixgbe: fix MAC VLAN filter fail problem")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
All ipsec related settings are being held in the driver
private data to allow easy add and remove of SAS. There
is no need to keep a record of the keys, and also
storing the keys can be a security issue.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
ixgbe ntuple filter in rte_flow needs to support diversion data
with less than 5 tuple parameters. So it adds this new support
in parser code. This patch also adds parsering vlan pattern code
in ntuple filter in order to handle some cases like vlan in flow
API.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The datasheet says, if using MSI-X mode, the PBA support
bit of the GPIE register must be set to 1.
DPDK uses polling mode, we cannot hit this issue in the
scenario DPDK PF + DPDK VF. If we use DPDK PF + kernel VF,
as the kernel driver uses interrpt mode, VF may hit RX hang
after running hours.
Fixes: 00e30184da ("ixgbe: add PF support")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
fixes the following compilation error on compiling with ARM BE compiler
ixgbe_common.c: In function ‘ixgbe_host_interface_command’:
ixgbe_common.c:4610:22: error: passing argument 1 of
‘__builtin_bswap32’ makes integer from pointer without a cast
[-Werror=int-conversion]
IXGBE_LE32_TO_CPUS(&buffer[bi]);
^
Fixes: aa4fc14d2c ("ixgbe: update base driver")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Fixes: 97cb466d65 ("mbuf: use 2 bytes for port and nb segments")
Cc: stable@dpdk.org
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The action for L2 tunnel should be VF or PF, not QUEUE.
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
And small performance improvement
Fixes: 9a0752f498 ("net/ixgbe: enable inline IPsec")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
On SUSE11 with gcc 4.5.1 the following build error occurred,
most likely because of improper handling of annonymous unions:
drivers/net/ixgbe/ixgbe_ipsec.c:579:4: error:
unknown field ‘ipsec’ specified in initializer
Fixes: 9a0752f498 ("net/ixgbe: enable inline IPsec")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When SRIOV is active, the function ixgbe_dev_get_dcb_info( )
should return the DCB traffic class info of its own queues,
not including any DCB info of the queues of any its VF.
When VMDQ is active, all queues are belonged to the PF,
the function ixgbe_dev_get_dcb_info can return DCB info
of all queues.
Fixes: 89d6728c78 ("ethdev: get DCB information")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
It's by design that APP can add a TM node without shaper
profile. But ixgbe doesn't support it currently.
Fixes: e0ff4d304c ("net/ixgbe: support adding TM node")
Fixes: 5713ade697 ("net/ixgbe: support committing TM hierarchy")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Only queue nodes should be taken as leaf nodes, all
the other nodes are non-leaf nodes.
Correct it when getting the TM level capability.
Fixes: 596988e193 ("net/ixgbe: support getting TM level capability")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Only queue nodes should be taken as leaf nodes, all
the other nodes are non-leaf nodes.
Correct it when checking the parameters of the TM nodes.
Fixes: e0ff4d304c ("net/ixgbe: support adding TM node")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
In order to achieve reproducible builds, always use the same
order when listing files for compilation.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
If we want to enable IOVA mode, introduced by
commit 93878cf025 ("eal: introduce helper API for IOVA mode"),
we need PMDs (for PCI devices) to expose this flag.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
In func ixgbe_dev_link_update(), "link.link_autoneg" is used in func
call rte_ixgbe_dev_atomic_write_link_status(), but is uninitialized.
Fixes: 82113036e4 ("ethdev: redesign link speed config")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When a VF port is bound to VFIO-PIC, only miscellaneous interrupt
is mapped to VFIO vector 0 in eth_ixgbevf_dev_init( ).
In ixgbevf_dev_start(), if previous VFIO interrupt mapping set in
eth_ixgbevf_dev_init( ) is not cleard, it will fail when calling
rte_intr_enable( ) tries to map Rx queue interrupt to other VFIO
vectors. This patch clears the VFIO interrupt mappings before
setting both miscellaneous and Rx queue interrupt mappings again
to avoid failure.
Fixes: 77234603fb ("net/ixgbe: support VF mailbox interrupt for link up/down")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: Jianwei Ma <jianwei.ma@intel.com>
When a VF port is bound to VFIO-PCI, miscellaneous interrupt is
mapped to MSI-X vector 0 and Rx queues interrupt are mapped to
other vectors in vfio_enable_msix( ). To simplify implementation,
all VFIO-PCI bound ixgbe VF Rx queue interrupts can be mapped in
vector 1. And as current igb_uio only support only one vector,
ixgbe VF PMD should use vector 0 for igb_uio and vector 1 for
VFIO-PCI. Without this patch, VF Rx queue interrupt is mapped
to vector 0 in register settings and mapped to VFIO vector 1
in vfio_enable_msix( ), and then all Rx queue interrupts will
be missed.
Fixes: b13bfab4cd ("eal: reserve VFIO vector zero for misc interrupt")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: Jianwei Ma <jianwei.ma@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some compilers generate warnings for duplicate symbols for the
set of filter lists current defined in ixgbe_ethdev.h.
This commits moves the definition and declaration to the source
file that actually uses them and provides a function to
initialize the values akin to its flush function.
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Radu Nicolau <radu.nicolau@intel.com>
mirror rule_type can be a bit OR result of multiple mirror type of
a rule.
Fixes: 7ba29a76b1 ("ethdev: rename and extend the mirror type")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In the function ixgbe_flow_create(), the value ntuple_filter_ptr,
ethertype_filter_ptr, syn_filter_ptr, fdir_rule_ptr and l2_tn_filter_ptr
use rte_zmalloc().
malloc may return NULL, so we should check if the return value is NULL
or success.
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the mapping of user priority to traffic class
in Rx/Tx path of DCB configuration. Each DCB traffic class
should include all user priorities mapping to it in both Rx and
Tx path.
Fixes: 0807f80d35 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch is to align with PF kernel driver version 5.1.3 to add the
number of queues to transmit VLAN packets in msg of queue info to VF.
If DCB is enabled, it is the number of DCB traffic classes.
If DCB is not enabled and default VLAN is enabled, it is 1.
For other cases, it is 0.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add a mode type check for MAC VLAN mode, if fdir is
in this mode, it do not need to do sanity check for x550.
Fixes: dc0c16105d ("ixgbe: fix X550 flow director check")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reset a NIC by calling dev_uninit and then dev_init.
Go through same way in NIC PCI remove without release of
ethdev resource and then NIC PCI probe function without
ethdev resource allocation.
Signed-off-by: Wei Dai <wei.dai@intel.com>
After fail to create a flow and if this is the first flow, the
mask_added flag should be reset, or it will prevent a new flow
which require different mask be created, since the mask config
remains impact.
Fixes: 72c135a89f ("net/ixgbe: create consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds support of 2.5G and 5G ethernet interface on X550.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The pci_id_ixgbe_map table has only PCI_ANY_ID for
.subvend and .subdev in all entries. Using of IXGBE_SUBDEV_ID_82599_SFP
for 'dev' is not correct. It generates the wrong PMD_INFO_STRING.
The output of the program "dpdk-pmdinfo.py" is confusing.
Signed-off-by: Leonid Myravjev <myravjev@amicon.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mirror rule id should not exceed the boundary defined by
IXGBE_MAX_MIRROR_RULES.
Fixes: fe3a45fd41 ("ixgbe: add VMDq support")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This NIC type port check should use port index
not mask for 82599ES.
Fixes: d9347d2540 ("net/ixgbe: support 82599ES SCTP packet drop action")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Only x550 family support SCTP port in FDIR filter, so
add this limitation when parse consistent API.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
If there's no Traffic Management node added,
not necessary to check if TM is committed.
Fixes: 5713ade697 ("net/ixgbe: support committing TM hierarchy")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
x550 devices don't map interrupt vector before enabling Rx/Tx queue
interrupt.
Because of this interrupt mode is not working for x550 devices.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add queue index check when create filter rule, or
filter with invalid queue id can be created successfully.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
The x550 family does not support ipv6-other flow as well as
ipv4-other flow, so add this limitation.
Fixes: 7d629caced ("net/ixgbe: enable IPv6 for consistent API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
82599ES can support SCTP packet drop action, but the
configuration is different from TCP or UDP packet, so
it need to rework some FDIR related code to adapt
drop action rule of SCTP packet.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Drop action is not supported by signature match, should return
error when try to create a signature match flow with drop action.
Fixes: a948d33bc0 ("net/ixgbe: enable signature match for consistent API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
If LSC flag is changed to off at last device start, the
enable flag is not cleared in HW.
This patch fixes it.
Fixes: 0eb609239e ("ixgbe: enable Rx queue interrupts for PF and VF")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the support of the Traffic Management API,
rte_tm_hierarchy_commit.
When calling this API, the driver tries to enable
the TM configuration on HW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Currently, if requested MTU is bigger than mbuf size and scattered
receive is not enabled, setting MTU to that value fails.
This patch allows setting this special MTU when device is stopped,
because scattered_rx will be re-configured during next port start
and driver may enable scattered receive according new MTU value.
After this patch, driver may select different receive function
automatically after MTU set, according MTU values selected.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable IPv6 support with rte_flow API.
Only supports signature Match.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable signature match for rte_flow API.
RTE_FLOW_ITEM_TYPE_FUZZY specify a signature match.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Code cleanup done for 2 purposes.
1. "index" variable is no more needed.
2. inline function makes it easier and safer to nest into a loop.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In current implementation, when checking VF link state, PF state
is checked too, although the function has a parameter to tell
if PF state checking is needed.
But in some scenario, user may not care about the PF state.
This patch enables the unused parameter to only check the VF
link state.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Hardware PTYPE in Rx desc will be parsed to fill mbuf's packet_type.
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Device name resides in two different locations, in rte_device->name and
in ethernet device private data.
For now, the copy in the ethernet device private data is required for
multi process support, the name is the how secondary process finds about
primary process device.
But for drivers there is no reason to use the copy in the ethernet
device private data.
This patch updates PMDs to use only rte_device->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since SSE4 is now part of minimum requirements for DPDK on x86, we no
longer need this fallback code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Isolated mode can be requested by applications on individual ports to avoid
ingress traffic outside of the flow rules they define.
Besides making ingress more deterministic, it allows PMDs to safely reuse
resources otherwise assigned to handle the remaining traffic, such as
global RSS configuration settings, VLAN filters, MAC address entries,
legacy filter API rules and so on in order to expand the set of possible
flow rule types.
To minimize code complexity, PMDs implementing this mode may provide
partial (or even no) support for flow rules when not enabled (e.g. no
priorities, no RSS action). Applications written to use the flow API are
therefore encouraged to enable it.
Once effective, leaving isolated mode may not be possible depending on PMD
implementation.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_driver->name has the driver name and all physical and virtual
devices has access to it.
Previously it was not possible for virtual ethernet devices to access
rte_driver->name field (because eth_dev used to keep only pci_dev),
and it was required to save driver name in the device private struct.
After re-works on bus and vdev, it is possible for all bus types to
access rte_driver.
It is able to remove the driver name from ethdev device private data and
use eth_dev->device->driver->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
When the last fdir flow be destroyed, the flag "mask_added"
should be reset, so the remain mask info will not take effect
when a new flow be added.
Fixes: a14de8b498 ("net/ixgbe: destroy consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Move all bypass functions to ixgbe pmd and remove function
pointers from the eth_dev_ops struct.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch disables X550EM_X 1Gbase-t led_[on|off] support since
the LEDs are wired to the PHY and the driver can not access the
PHY. led_[on|off]
Support is disabled by setting the function pointer to NULL.
init_led_link_act is also set to NULL.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch removes some some 1GBASE-T PHY access since the FW
configures the PHY. SW shall not configure or initialize link.
Accessing the PHY would require the use of MDI clause 22 which
should be avoided in high layer driver code.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
remove __rte_unused instances that are not required.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
See: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is a bug in previous fix for lsc interrupt.
lsc interrupt is not disabled before delayed handler,
that cause the delayed handler be re-entered.
Fixes: 9b66721070 ("net/ixgbe: fix blocked interrupts")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
hw->mac.ops.get_media-type() of ixgbe VF is NULL and should not
be called directly. It had better be replaced by calling
ixgbe_get_media_type( ) to avoid crash.
Fixes: c12d22f65b ("net/ixgbe: ensure link status is updated")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Laurent Hardy <laurent.hardy@6wind.com>
Add a comment documenting explicitly that we are falling through the case
statements to the next one.
Fixes: f9072f8b90 ("ixgbe: migrate flow director filtering to new API")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For base code in drivers shared with other projects, disable the new
warnings from gcc 7 about unlabelled fall-through in switch statements.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Return mbuf points of _recv_raw_pkts_vec are modified out of bound.
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
There exists case that software sets mtu (i.e jumbo frame) of
ixgbe device when it's stopped. Before the fix, scattered_rx
is cleared during device stop, and setting jumbo frame mtu
after device stop will always fail as scattered_rx is 0.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some customers find that 82599 NIC DPDK VF PMD can't receive any
broadcast packets when it is bound to igb_uio in the first time
to run a DPDK application like testpmd. But when the application
is quited and run again, the DPDK VF PMD can receive broadcast
packets again. The associated PF is run by kernel driver when
the VF is driven by DPDK PMD.
Fixes: 260e2e22e2 ("net/ixgbe/base: move multicast mode update")
Fixes: 72dec9e37a ("ixgbe: support multicast promiscuous mode on VF")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Pool 0 is not PF, it's VF 0. So the MAC is set for VF 0
but not PF.
The code introduced a weird issue. In the scenario PF + VF,
when only starting PF, the default PF MAC address is working.
But after starting a VF, the default PF MAC address becomes
the VF's address.
Use the pool which is not occupied by VFs for PF to fix it.
Fixes: 8164fe8284 ("ixgbe: add default mac address modifier")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some customers find adding MAC addr to VF sometimes can fail,
but it is still stored in dev->data->mac_addrs[ ]. So this
can lead to some errors that assumes the non-zero entry in
dev->data->mac_addrs[ ] is valid.
Following acknowledgements are from specific NIC PMD
maintainer for their managing part.
This patch changes the ethdev internal API, it should not be
backported to a stable/LTS release so far.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To achieve functionality of retrieving only specific statistics
given by application there are two new functions added:
ixgbe_dev_xstats_get_by_ids() which retrieve
values of statistics specified by ids array
and ixgbe_dev_xstats_get_names_by_ids() which retrieve
names of statistics specified by ids array.
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Revert patches to provide clear view for
upcoming changes. Reverted patches are listed below:
commit ea85e7d711 ("ethdev: retrieve xstats by ID")
commit a954495245 ("ethdev: get xstats ID by name")
commit 1223608adb ("app/proc-info: support xstats by ID")
commit 25e38f09af ("net/e1000: support xstats by ID")
commit 923419333f ("net/ixgbe: support xstats by ID")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
