The Meson cross file is renamed from meson_mingw.txt to cross-mingw,
and is added to test-meson-builds.sh.
The only example supported on Windows so far is "helloworld",
that's why the default list of examples is overridden.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add cross-compilation support of a PPC target in the build test matrix.
The CPU is defined as Power8, running as little endian.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
If a compiler is not found in $PATH, the compilation test is skipped.
In some cases, the compiler could be found after extending $PATH
in an environment configuration script (called by load-devel-config).
The decision to skip is deferred to a later stage, after loading the
configuration script.
In such case, the variable DPDK_TARGET, used by the configuration script
as input, is the compiler name.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Each cross-compilation case needs to define the target compiler
and the meson cross file.
Given the compiler is already defined in the cross file,
the latter is enough.
The function "build" is changed to accept a cross file alternatively
to the compiler name. In the case of a file (detected if readable),
the compiler is extracted with sed and tr, and the option --cross-file
is automatically added.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Casting thread ID to handle is not accurate way to get thread handle.
Need to use OpenThread function to get thread handle from thread ID.
pthread_setaffinity_np and pthread_getaffinity_np functions
for Windows are affected because of it.
Signed-off-by: Tasnim Bashar <tbashar@mellanox.com>
Uses SetupAPI.h functions to scan PCI tree.
Uses DEVPKEY_Device_Numa_Node to get the PCI NUMA node.
Uses SPDRP_BUSNUMBER and SPDRP_BUSNUMBER to get the BDF.
scanning currently supports types RTE_KDRV_NONE.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
the struct rte_pci_addr defines domain as uint32_t variable however
the PCI_PRI_FMT macro used for logging the struct sets the format
of domain to uint16_t.
The mismatch causes the following warning messages
in Windows clang build:
format specifies type 'unsigned short' but the argument
has type 'uint32_t' (aka 'unsigned int') [-Wformat]
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Added <sys/types.h> in rte_pci header file
to include off_t type since it is missing for Windows.
Define the implementation of the Linux function rte_pci_get_sysfs_path
in pci_common.c for Linux OS only as it is unneeded for other OSs
and to avoid the warning on deprecated call to getenv() on Windows:
"warning: 'getenv' is deprecated: This function or variable may be unsafe.
Consider using _dupenv_s instead."
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Changing all of PCIs Unix memory mapping to the
new memory allocation API wrapper.
Change all of PCI mapping function usage in
bus/pci to support the new API.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Move common functions between Unix and Windows to eal_common_options.c.
Those functions are getter functions for rte_application_usage_hook.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Move common functions between Unix and Windows to eal_common_config.c.
Those functions are getter functions for IOVA,
configuration, Multi-process.
Move rte_config, internal_config, early_mem_config and runtime_dir
to be defined in the common file with getter functions.
Refactor the users of the config variables above to use
the getter functions.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
The MinGW build for Windows has special cases where exported
function contain additional prefix:
__emutls_v.per_lcore__*
To avoid adding those prefixed functions to the version.map file
the map_to_def.py script was modified to create a map file for MinGW
with the needed changed.
The file name was changed to map_to_win.py and lib/meson.build map output
was unified with drivers/meson.build output
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
import library (/IMPLIB) in meson.build should use
the 'drivers' and not 'libs' folder.
The error is: fatal error LNK1149: output filename matches input filename.
The fix uses the correct folder.
Fixes: 5ed3766981 ("drivers: process shared link dependencies as for libs")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
pmdinfogen generation is currently unsupported for Windows.
The relevant part in meson.build is skipped.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
DPDK 20.05 had some deprecation notes after "make config"
and after the build.
For DPDK 20.08, the config note is replaced with a warning
before the config and before the build.
After the warning, there is a pause which can be skipped
with the variable MAKE_PAUSE.
This deprecation process was discussed in the Technical Board:
http://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Before removing the "make" build system completely,
the Linux guide instructions are made more concise and accurate.
Some detailed explanations are also available in
doc/guides/prog_guide/dev_kit_root_make_help.rst
This is the swan song for makefile system,
in order to have accurate information backported in LTS.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The build should be described only in few places,
in order to maintain up-to-date, accurate and detailed instructions.
This change is removing some of the unneeded repetitions.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
There was a doc about how to extend DPDK by adding a library.
It could have been useful but was never updated,
so it is lacking a lot of explanations about doxygen,
meson, versioning, maintainership, etc.
Anyway such guidelines should fit in the contributors guide.
Better to completely remove this obsolete document.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Introduce packet forwarding support to the app to do
some performance measurements.
The measurements are reported in term of packet per
second unit. The forwarding will start after the end
of insertion/deletion operations.
The support has single and multi performance measurements.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Introduce new feature to dump memory statistics of each socket
and a total for all before and after the creation.
This will give two main advantage:
1- Check the memory consumption for large number of flows
"insertion rate scenario alone"
2- Check that no memory leackage after doing insertion then
deletion.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add the ability to test deletion rate for flow performance
application.
This feature is disabled by default, and can be enabled by
add "--deletion-rate" in the application command line options.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add insertion rate calculation feature into flow
performance application.
The application now provide the ability to test
insertion rate of specific rte_flow rule, by
stressing it to the NIC, and calculate the
insertion rate.
The application offers some options in the command
line, to configure which rule to apply.
After that the application will start producing
rules with same pattern but increasing the outer IP
source address by 1 each time, thus it will give
different flow each time, and all other items will
have open masks.
The current design have single core insertion rate.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
For each mbuf byte, free_space[i] == 0 means the space is occupied,
free_space[i] != 0 means space is free.
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The value free_space[i] is used to save the size of biggest aligned
element that can fit in the zone, current implementation has one flaw,
for example, if user registers dynfield1 (size = 4, align = 4, req = 124)
first, the free_space would be as below after registration:
0070: 08 08 08 08 08 08 08 08
0078: 08 08 08 08 00 00 00 00
Then if user continues to register dynfield2 (size = 4, align = 4),
free_space would become:
0070: 00 00 00 00 04 04 04 04
0078: 04 04 04 04 00 00 00 00
Further request dynfield3 (size = 8, align = 8) would fail to register
due to alignment requirement can't be satisfied, though there is enough
space remained in mbuf.
This patch fixes above issue by saving alignment only in aligned zone,
after the fix, above registrations order can be satisfied, free_space
would be like:
After dynfield1 registration:
0070: 08 08 08 08 08 08 08 08
0078: 04 04 04 04 00 00 00 00
After dynfield2 registration:
0070: 08 08 08 08 08 08 08 08
0078: 00 00 00 00 00 00 00 00
After dynfield3 registration:
0070: 00 00 00 00 00 00 00 00
0078: 00 00 00 00 00 00 00 00
This patch also reduces iterations in process_score() by jumping align
steps in each loop.
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Set rte_errno as ENOMEM when allocation failure.
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
We should make sure off + size < sizeof(struct rte_mbuf) to avoid
possible out-of-bounds access of free_space array, there is no issue
currently due to the low bits of free_flags (which is adjacent to
free_space) are always set to 0. But we shouldn't rely on it since it's
fragile and layout of struct mbuf_dyn_shm may be changed in the future.
This patch adds boundary check explicitly to avoid potential risk of
out-of-bounds access.
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
To fix CVE-2020-12888, the linux vfio-pci module will invalidate mmaps
and block MMIO access on disabled memory, it will send a SIGBUS to the
application:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=abafbc551fdd
When the application opens the vfio PCI device, the vfio-pci module will
enable the bus memory space through PCI read/write access. According to
the PCIe specification, the 'Memory Space Enable' is always zero for VF:
Table 9-13 Command Register Changes
Bit Location | PF and VF Register Differences | PF | VF
| From Base | Attributes | Attributes
-------------+--------------------------------+------------+-----------
| Memory Space Enable - Does not | |
| apply to VFs. Must be hardwired| Base | 0b
1 | to 0b for VFs. VF Memory Space | |
| is controlled by the VF MSE bit| |
| in the VF Control register. | |
-------------+--------------------------------+------------+-----------
Afterwards the vfio-pci will initialize its own virtual PCI config space
data ('vconfig') by reading the VF's physical PCI config space, then the
'Memory Space Enable' bit in vconfig will always be 0b value. This will
make the vfio-pci treat the BAR memory space as disabled, and the SIGBUS
will be triggered if access these BARs.
By investigation, the VF PCI device *passthrough* into the Guest OS by
QEMU has the 'Memory Space Enable' with 1b value. That's because every
PCI driver will start to enable the memory space, and this action will
be hooked by vfio-pci virtual PCI read/write to set the 'Memory Space
Enable' in vconfig space to 1b. So VF runs in guest OS has 'Mem+', but
VF runs in host OS has 'Mem-'.
Align with PCI working mode in Guest/QEMU/Host, in DPDK, enable the PCI
bus memory space explicitly to avoid access on disabled memory.
Fixes: 33604c3135 ("vfio: refactor PCI BAR mapping")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Tested-by: Thierry Martin <thierry.martin.public@gmail.com>
Caught by code review, bitops test name is incorrect.
Fixes: 7660614c11 ("test/bitops: add bit operations test case")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Phil Yang <phil.yang@arm.com>
The path to the socket when running the script as a regular user needed
to be updated to match the logic in EAL.
Fixes: 6a2967c112 ("usertools: add new telemetry script")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
vmbus_map_addr is used as the next start virtual address for mapping ring
buffer. However it's updated based on ring_buf, which is a pointer to an
address on the stack. The next ring buffer may be mapped to an unexpected
address.
Fix this by calculating vmbus_map_addr based on returned virtual address.
Fixes: 3f9277031a ("bus/vmbus: fix check for mmap failure")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
64-bit support was missing from the functions pipe_profile_check
and rte_sched_subport_config_pipe_profile_table.
Fixes: 68c1f26d42 ("sched: support 64-bit values")
Cc: stable@dpdk.org
Signed-off-by: Archit Pandey <architpandeynitk@gmail.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
In function rte_sched_subport_free, there is code to free all allocated
stuff related to scheduler subport.
First there are some checks, and in the end, rte_bitmap_free is called.
Now, rte_bitmap_free is a dummy function, and it just checks if
provided pointer to bitmap is valid or not. So, actual memory for
subport is not freed.
This patch fixes this by removing call to rte_bitmap_free, and
instead calling rte_free.
Fixes: d9213b829a ("sched: remove pipe params config from port level")
Cc: stable@dpdk.org
Signed-off-by: Hrvoje Habjanic <hrvoje.habjanic@zg.ht.hr>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
When printf()'s stdout is line-buffered for terminal, it is fully
buffered for pipes. So, stdout listener can only get the output
when it is flushed (on program termination, when buffer is filled or
manual flush).
stdout buffer might fill slowly since every stats report could be small.
Also when it is fully filled it might contain a part of the last stats
report which makes it very inconvenient for any automation which reads
and parses the output.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Georgiy Levashov <georgiy.levashov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
In order to optimize the PCI management, RTE_KDRV_NONE based
device driver probing removed by not adding them to list in
the scan phase.
The legacy virtio is the only consumer of RTE_KDRV_NONE based device
driver probe scheme. The legacy virtio support will be available
through the existing VFIO/UIO based kernel driver scheme.
This patch also removes the deprecation notice for the same.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Make x86 JIT to generate native code for
(BPF_ABS | <size> | BPF_LD) and (BPF_IND | <size> | BPF_LD)
instructions.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
To fill the gap with linux kernel eBPF implementation,
add support for two non-generic instructions:
(BPF_ABS | <size> | BPF_LD) and (BPF_IND | <size> | BPF_LD)
which are used to access packet data.
These instructions can only be used when BPF context is a pointer
to 'struct rte_mbuf' (i.e: RTE_BPF_ARG_PTR_MBUF type).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
eval_add()/eval_sub() not always correctly estimate
minimum and maximum possible values of add/sub operations.
Fixes: 8021917293 ("bpf: add extra validation for input BPF program")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Address for few small issues:
- unreachable return statement
- failed test-case can finish with 'success' status
Also use unified cmp_res() function to check return value.
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Support the debug functions in eal_common_debug.c for Windows.
Implementation of rte_dump_stack to get a backtrace similarly to Unix
and of rte_eal_cleanup in eal.c.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Tested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Move common functions between Unix and Windows to eal_common_debug.c.
Those functions are rte_exit, __rte_panic and rte_dump_registers
which has the same implementation on Unix and Windows.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
An issue has been observed where epoll file descriptor
list rebuilds every time an interrupt/alarm event is
received.
eal_intr_process_interrupts() should notify pipe fd only
if any source is removed from the source list i.e (rv > 0)
Fixes: 0c7ce182a7 ("eal: add pending interrupt callback unregister")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
The code didn't compile when using exported meter functions under Windows.
error LNK2001: unresolved external symbol
rte_meter_srtcm_color_aware_check
error LNK2001: unresolved external symbol
rte_meter_srtcm_color_blind_check
error LNK2001: unresolved external symbol
rte_meter_trtcm_color_aware_check
error LNK2001: unresolved external symbol
rte_meter_trtcm_color_blind_check
error LNK2001: unresolved external symbol
rte_meter_trtcm_rfc4115_color_aware_check
error LNK2001: unresolved external symbol
rte_meter_trtcm_rfc4115_color_blind_check
The cause was that there were some inline functions that were included in
the export list.
To solve this the functions were removed from rte_meter_version.map export
list which are implemented in the header and shouldn't be exported.
Fixes: 655796d2b5 ("meter: support RFC4115 trTCM")
Fixes: 9d41beed24 ("lib: provide initial versioning")
Cc: stable@dpdk.org
Signed-off-by: Fady Bader <fady@mellanox.com>
