Due to the complex NVGRE_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
nvgre_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Due to the complex VXLAN_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
vxlan_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
udp_cksum is duplicated, second one should be tcp_cksum
Fixes: c73a9071877a ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch updates the programmer guide and testpmd user guide for
UDP/IPv4 GSO.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Add following testpmd run-time commands to support test of
new Rx offload API:
show port <port_id> rx_offload capabilities
show port <port_id> rx_offload configuration
port config <port_id> rx_offload <offload> on|off
port <port_id> rxq <queue_id> rx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_strip", "ipv4_cksum", ...
Add following testpmd run-time commands to support test of
new Tx offload API:
show port <port_id> tx_offload capabilities
show port <port_id> tx_offload configuration
port config <port_id> tx_offload <offload> on|off
port <port_id> txq <queue_id> tx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_insert", "udp_cksum", ...
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add two new command-line parameters for either enabling or
disabling locking all memory at app startup.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Traffic manager provides an API for resuming
an arbitrary node in a hierarchy.
This commit adds support for calling this API
from testpmd.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Traffic manager provides an API for suspending
an arbitrary node in a hierarchy.
This commit adds support for calling this API from testpmd.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Introduces a new action type RTE_FLOW_ITEM_TYPE_MARK which enables
flow patterns to specify arbitrary integer values to match aginst
set by the RTE_FLOW_ACTION_TYPE_MARK action in previously matched
flows.
Add support for specification of new MARK flow item in testpmd's cli.
Update testpmd documentation to describe new MARK flow item support.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add jump action type which defines an action which allows a matched
flow to be redirect to the specified group. This allows physical and
logical flow table/group hierarchies to be defined through rte_flow.
This breaks ABI compatibility for the following public functions (as it
modifes the ordering of the rte_flow_action_type enumeration):
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Add support for specification of new JUMP action to testpmd's flow
cli, and update the testpmd documentation to describe this new
action.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add support for the following OpenFlow-defined actions:
- RTE_FLOW_ACTION_OF_POP_VLAN: pop the outer VLAN tag.
- RTE_FLOW_ACTION_OF_PUSH_VLAN: push a new VLAN tag.
- RTE_FLOW_ACTION_OF_SET_VLAN_VID: set the 802.1q VLAN id.
- RTE_FLOW_ACTION_OF_SET_VLAN_PCP: set the 802.1q priority.
- RTE_FLOW_ACTION_OF_POP_MPLS: pop the outer MPLS tag.
- RTE_FLOW_ACTION_OF_PUSH_MPLS: push a new MPLS tag.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add VXLAN-GPE support to csum forwarding engine and rte flow.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
RTE_FLOW_ACTION_TYPE_PORT_ID brings the ability to inject matching traffic
into a different device, as identified by its DPDK port ID.
This is normally only supported when the target port ID has some kind of
relationship with the port ID the flow rule is created against, such as
being exposed by a common physical device (e.g. a different port of an
Ethernet switch).
The converse pattern item, RTE_FLOW_ITEM_TYPE_PORT_ID, makes the resulting
flow rule match traffic whose origin is the specified port ID. Note that
specifying a port ID that differs from the one the flow rule is created
against is normally meaningless (if even accepted), but can make sense if
combined with the transfer attribute.
These must not be confused with their PHY_PORT counterparts, which refer to
physical ports using device-specific indices, but unlike PORT_ID are not
necessarily tied to DPDK port IDs.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds the missing action counterpart to the PHY_PORT pattern
item, that is, the ability to directly inject matching traffic into a
physical port of the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
While RTE_FLOW_ITEM_TYPE_PORT refers to physical ports of the underlying
device using specific identifiers, these are often confused with DPDK port
IDs exposed to applications in the global name space.
Since this pattern item is seldom used, rename it RTE_FLOW_ITEM_PHY_PORT
for better clarity.
No ABI impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Contrary to all other pattern items, these are inconsistently documented as
affecting traffic instead of simply matching its origin, without provision
for the latter.
This commit clarifies documentation and updates PMDs since the original
behavior now has to be explicitly requested using the new transfer
attribute.
It breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
Impacted PMDs are bnxt and i40e, for which the VF pattern item is now only
supported when a transfer attribute is also present.
Fixes: b1a4b4cbc0a8 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
TPID handling in rte_flow VLAN and E_TAG pattern item definitions is not
consistent with the normal stacking order of pattern items, which is
confusing to applications.
Problem is that when followed by one of these layers, the EtherType field
of the preceding layer keeps its "inner" definition, and the "outer" TPID
is provided by the subsequent layer, the reverse of how a packet looks like
on the wire:
Wire: [ ETH TPID = A | VLAN EtherType = B | B DATA ]
rte_flow: [ ETH EtherType = B | VLAN TPID = A | B DATA ]
Worse, when QinQ is involved, the stacking order of VLAN layers is
unspecified. It is unclear whether it should be reversed (innermost to
outermost) as well given TPID applies to the previous layer:
Wire: [ ETH TPID = A | VLAN TPID = B | VLAN EtherType = C | C DATA ]
rte_flow 1: [ ETH EtherType = C | VLAN TPID = B | VLAN TPID = A | C DATA ]
rte_flow 2: [ ETH EtherType = C | VLAN TPID = A | VLAN TPID = B | C DATA ]
While specifying EtherType/TPID is hopefully rarely necessary, the stacking
order in case of QinQ and the lack of documentation remain an issue.
This patch replaces TPID in the VLAN pattern item with an inner
EtherType/TPID as is usually done everywhere else (e.g. struct vlan_hdr),
clarifies documentation and updates all relevant code.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Summary of changes for PMDs that implement ETH, VLAN or E_TAG pattern
items:
- bnxt: EtherType matching is supported with and without VLAN, but TPID
matching is not and triggers an error.
- e1000: EtherType matching is only supported with the ETHERTYPE filter,
which does not support VLAN matching, therefore no impact.
- enic: same as bnxt.
- i40e: same as bnxt with existing FDIR limitations on allowed EtherType
values. The remaining filter types (VXLAN, NVGRE, QINQ) do not support
EtherType matching.
- ixgbe: same as e1000, with additional minor change to rely on the new
E-Tag macro definition.
- mlx4: EtherType/TPID matching is not supported, no impact.
- mlx5: same as bnxt.
- mvpp2: same as bnxt.
- sfc: same as bnxt.
- tap: same as bnxt.
Fixes: b1a4b4cbc0a8 ("ethdev: introduce generic flow API")
Fixes: 99e7003831c3 ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182a5 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182a5 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Upcoming changes in relation to the handling of actions list will make the
DUP action redundant as specifying several QUEUE actions will achieve the
same behavior. Besides, no PMD implements this action.
By removing an entry from enum rte_flow_action_type, this patch breaks ABI
compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This change adds a new option to "port config" command to
add udp tunnel port for VXLAN and GENEVE tunneling protocols.
This command can be extended for other tunneling protocols
listed in "enum rte_eth_tunnel_type" as and when needed.
usage:
port config <port_id> udp_tunnel_port add|rm vxlan|geneve <udp_port>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add command to change specific queue's ring size configure,
the new value will only take effect after command that restart
the device(port stop <port_id>/port start <port_id>) or command
that setup the queue(port <port_id> rxq <qid> setup) at runtime.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new command to setup queue, rte_eth_[rx|tx]_queue_setup will
be called corresponsively.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patches add "default" parameter to "port config all rss" command.
"default" means all supported hash types reported by device info.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Users cannot override the default RSS settings when entering a RSS action,
only a list of queues can be provided.
This patch enables them to set a RSS hash key and types for a flow rule.
Fixes: 05d34c6e9d2c ("app/testpmd: add queue actions to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch allows testpmd to make use of per-PMD tuned parameter values.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Use testpmd for example, to show how an application uses device event
APIs to monitor the hotplug events, including both hot removal event
and hot insertion event.
The process is that, testpmd first enable hotplug by below commands,
E.g. ./build/app/testpmd -c 0x3 --n 4 -- -i --hot-plug
then testpmd starts the device event monitor by calling the new API
(rte_dev_event_monitor_start) and register the user's callback by call
the API (rte_dev_event_callback_register), when device being hotplug
insertion or hotplug removal, the device event monitor detects the event
and call user's callbacks, user could process the event in the callback
accordingly.
This patch only shows the event monitoring, device attach/detach would
not be involved here, will add from other hotplug patch set.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Documentation and help string more clear describe meaning of
arguments for DDP add del function.
Fixes: 856ceb331b0a ("app/testpmd: enable DDP remove profile feature")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Error information on current core usage list, mask or map
were incomplete. Added states to differentiate core usage
and to inform user.
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Command used for querying node or level capabilities requires
argument which specifies which set of capabilities to show.
Thus trying to show node/level capabilities using current
documentation will not work. Fix that by adding missing
arguments to command documentation.
Fixes: 5b590fbe09b6 ("app/testpmd: add traffic management forwarding mode")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Introduced a run time command to change the
log level for a given log type. Added the
necessary documentation.
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Removed the hardcoded preconfigured Rx VLAN offload configuration
from testpmd and changed the Rx offload command line parameters from
disable to enable.
It has been decided by the Technical Board that testers who wish to
use these offloads will now have to explicitly write them in the
command-line when running testpmd.
The agreement is to keep two exceptions enabled by default in 18.02:
Rx CRC strip and Tx fast free.
Motivation:
Some PMDs such at the mlx4 may not implement all the offloads.
After the offload API rework assuming no offload is enabled by default,
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API") trying
to enable a not supported offload is clearly an error which will cause
configuration failing.
Considering that testpmd is an application to test the PMD, it should
not fail on a configuration which was not explicitly requested.
The behavior of this test application is then turned to an opt-in
model.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds command to configure input set for RSS,
FDIR, and FDIR flexible payload.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There are new Ethernet device events - NEW and DESTROY, and new option
to register all ports by one call.
Adjust application to aforementioned changes.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add description of raw flow type mode for flow_director_filter
command in testpmd. Modify description of flow type parameter
for functions set_hash_global_config, set_hash_input_set and
set_fdir_input_set.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the ability to match VNI and protocol fields of GENEVE protocol
header.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This command will simulate the process of setting the
eth-peer from command line.
It will be useful to perform extra testing.
usage:
testpmd> set eth-peer <port_id> <peer_addr>.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since testpmd is now using the new Ethdev offloads API and there is
a way configure each of the tx offloads from CLI or command line,
there is no need for the txqflags configuration anymore.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds command line option to set hex value for the ports Tx
offloads flags.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, especially when
multi-queue is enabled.
Added an option to set whether zero values should be displayed
or not for xstats. The "set xstats-hide-zero on|off" command enables
the user to decide if the zero values should be shown while
displaying xstats.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
