It corrects the input set values to be set for vlan or
double vlan.
Fixes: 98f055707685 ("i40e: configure input fields for RSS or flow director")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
This is one of those trivial things git and other tools complain
about.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When dev_stop is called in i40evf pmd driver, queues are switched off
to stop receiving and transmitting. But the mac address of this VF
still exists in VEB switch.
To stop the traffic from VSI level, the mac address need to be removed
too. Then the bandwidth for this SRIOV VSI can be freed.
This patch fix this issue.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
There is a new function in the EAL API for internal use.
It has neither a proper prefix nor a .map export:
libethdev.so: undefined reference to `is_xen_dom0_supported'
Fixes: 719dbebceb81 ("xen: allow determining DOM0 at runtime")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is a compilation issue with some compilers.
In i686 platform, long is 32bit, so XXX_CYCLECOUNTER_MASK
need define as 'ULL'
Fixes: 9c857bf6be87 ("igb: support ieee1588 functions for device time")
Fixes: 1c4445e1f28e ("ixgbe: support ieee1588 functions for device time")
Fixes: f3a4e40eca0c ("i40e: support ieee1588 functions for device time")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
It fixes the issue of not configuring rss key enable flags
when there is no rss key available.
Fixes: 647d1eaf758b ("i40evf: support AQ based RSS config")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
For i40e vf driver, should use I40EVF_WRITE_FLUSH to flush
configuration but not I40E_WRITE_FLUSH. This patch fixed this issue.
Fixes: be6c228d4da3 (i40evf: support Rx interrupt)
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If DCB is not enabled, the BW info is not stored for VSI. This
patch fixes this issue by merging functions i40e_vsi_dump_bw_config
and i40e_vsi_get_bw_info together.
Fixes: c8b9a3e3fe1b (i40e: support DCB mode)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When NVM version is updated to 5.x, DCB can not be configured. This
issue is because of the FW version validation is not correct.
This patch fixed this issue.
Fixes: c8b9a3e3fe1b (i40e: support DCB mode)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yulong Pei <yulong.pei@intel.com>
As firmware does not support any link control from software driver
side, any phy config should be ignored as a workaround. Otherwise
the link might not be up again after binding back to kernel driver.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
It fixes the issue of not re-configuring hash enable flags (HENA)
if there is no key.
Fixes: d0a349409bd7 ("i40e: support AQ based RSS config")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch removes the crc bytes from byte counter statistics.
Doing so fixes a bug that CRC bytes were included on TX but not
on RX, causing mismatch of bytes received / sent.
Fixes: 9aace75fc82e ("i40e: fix statistics")
Reported-by: Weichun Chen <weichunx.chen@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add additional functions to support the existing IEEE1588
functionality and to enable getting, setting and adjusting
the device time.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
This patch refactors the queue and priority statistic handling.
Generic queue stats are presented by rte_eth_xstats_get(), and the
i40e_xstats_get() exposes only the extra stats.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
It fixes the issue of trying to allocate more VSIs for VMDq than
hardware remaining. It adds a check of the hardware remaining
before allocating VSIs for VMDq.
Fixes: c80707a0fd9c ("i40e: fix VMDq pool limit")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
This patch fixes a bug where only some of the statistics were being
reset when calling rte_eth_stats_reset() or rte_eth_xstats_reset().
As both the stats reset and xstats reset do the same, refactor away
the duplicated function.
This patch marks the VSI to update its offset, causing the stats be
look like they are reset.
Fixes: 9aace75fc82e ("i40e: fix statistics")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
This fixes the issue of not freeing memzone in a call to free the
memory for adminq DMA.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
It fixes the issue of cannot using more than 1 poor for VMDq,
according to the queues left.
Fixes: 705b57f82054 ("i40e: enlarge the number of supported queues")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Fix for the following error on icc 2015, due to incorrect type:
drivers/net/i40e/i40e_fdir.c(1376): error #188:
enumerated type mixed with another type
case RTE_ETH_FDIR_FILTER_INPUT_SET_SELECT:
Fixes: 98f05570 ("i40e: configure input fields for RSS or flow director")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
It fixes compile issue on ICC 13.0.0.
Error logs:
i40e_ethdev.c(7943): error #188: enumerated type mixed with another type
Fixes: c8b9a3e3fe1b ("i40e: support DCB mode")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for RTE_ETH_FDIR_PASSTHRU flow director behavior so
output queue is assigned by other filters.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Following the same approach taken with dev_started field
in rte_eth_dev_data structure, this patch adds two new fields
in it, rx_queue_state and tx_queue_state arrays, which track
which queues have been started and which not.
This is important to avoid trying to start/stop twice a queue,
which will result in undefined behaviour
(which may cause RX/TX disruption).
Mind that only the PMDs which have queue_start/stop functions
have been changed to update this field, as the functions will
check the queue state before switching it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The patch enables rx interrupt support on i40e VF and some necessary
change on PF IOV mode to support VF.
On PF side, running in IOV mode via uio won't allow rx interrupt
which is exclusive with mbox interrupt in single vector competition.
On VF side, one single vector is shared for all the rx queues.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The patch enables rx interrupt support on i40e PF non-IOV mode.
Per queue rx interrupt works on vfio, however on uio, all rx queues
share one interrupt vector.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
The old statistics on i40e only counted the packets on ports.
So the discarding packets on VSI were not counted.
This patch is to make statistics for packets both on ports and VSI.
Also update release notes.
Signed-off-by: Xutao Sun <xutao.sun@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
By default, only first 3 bytes of GRE key will be used for hash or
FD calculation. With these changes, it can select 3 or 4 bytes of
GRE key for hash or FD calculation.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
The default input set of fields of a received packet are loaded from
firmware, which cannot be modified even users want to use different
fields for RSS or flow director. Here adds more flexibilities of
selecting packet fields for hash calculation or flow director for
users.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
It enlarges the number of supported queues to hardware allowed
maximum. There was a software limitation of 64 per physical port
which is not reasonable.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
It adjusts the number of queues for RSS from power of 2 to any as
long as it does not exceeds the hardware allowed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Use new function rte_eth_copy_pci_info.
Copy device info for the following pdevs:
bnx2x
cxgbe
e1000
enic
fm10k
i40e
ixgbe
mlx4
mlx5
virtio
vmxnet3
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It supports both Admin queue based and directly writing registers
based RSS hash key and lookup table configuration, as X722 supports
AQ based configuration.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
It supports both Admin queue based and directly writing registers
based RSS hash key and lookup table configuration, as X722 supports
AQ based configuration.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In order to provide users early access of X722 and its A0 hardware,
new device IDs are added, and also compilation with those support
in base driver is enabled.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add implementation of xstats() functions in i40evf PMD.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add xstats functions to i40e PMD, allowing extended statistics
to be retrieved from the NIC and exposed to the DPDK.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
According to XL710 datasheet:
RX QLEN restrictions: When the PXE_MODE flag in the GLLAN_RCTL_0
register is cleared, the QLEN must be whole number of 32
descriptors.
TX QLEN restrictions: When the PXE_MODE flag in the GLLAN_RCTL_0
register is cleared, the QLEN must be whole number of 32
descriptors.
So make sure that for both RX and TX queues number of HW descriptors is
a multiple of 32.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds one new API to get dcb related info.
rte_eth_dev_get_dcb_info
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch enables DCB feature on Intel XL710/X710 NICs. It includes:
Receive queue classification based on traffic class
Round Robin ETS schedule (rx and tx)
Priority flow control
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
To support FVL PMD can select which RX and TX function should be used
according to the queue config.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
To support the multiple segments in one packets when the received pkts exceed
one buffer size.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
The way to increase the performance of the vPMD TX is to use some fast mbuf
release method compares to the scalar TX.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
The vPMD RX function uses the multi-buffer and SSE instructions to
accelerate the RX speed, but now the pktype cannot be supported by the vPMD RX,
because it will decrease the performance heavily.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Feature Add: Rx/Tx flow control support for the i40e
All the Rx/Tx LFC enable/disable operation is done by the F/W,
so PMD driver need to use the Set PHY Config AD command to trigger the PHY
to do the auto-negotiation, after the Tx/Rx pause ability is negotiated,
the F/W will help us to set the related LFC enable/disable registers.
PMD driver also need to configure the related registers to control
how often to send the pause frame and what the value in the pause frame.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If DPDK is used on VF while the host is using Linux Kernel driver
as PF driver on FVL NIC, then VF Rx is reported only in batches of
4 packets. It is due to the kernel driver assumes VF driver is working
in interrupt mode, but DPDK VF is working in Polling mode.
This patch fixes this issue by using the V1.1 virtual channel with
Linux i40e PF driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
