The x86-default environment was loaded after installing this target.
I did not see any problem with it, yet we should load corresponding
environment before installing a target.
Fixes: bd253daa77 ("devtools: fix test of ninja install")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
The default verbosity of test-meson-builds.sh is to be quiet.
In order to better apply the verbosity policy, some file descriptors
are open to redirect to stdout or /dev/null accordingly.
The target variable and meson/ninja commands are printed in verbose modes.
The installation commands are printed only in very verbose mode.
The examples build commands are printed only in very verbose mode.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The variables DPDK_MESON_OPTIONS, PATH, PKG_CONFIG_PATH,
CPPFLAGS, CFLAGS and LDFLAGS can be customized in the config file
loaded by devtools/load-devel-config at each build.
The configuration can be adjusted per target thanks to the value set
in the DPDK_TARGET variable.
PKG_CONFIG_PATH is specific to each target, so it must be empty
before configuring each build from the file according to DPDK_TARGET.
Inheriting a default PKG_CONFIG_PATH for all targets does not make sense
and is prone to confusion.
DPDK_MESON_OPTIONS might take a global initial value from environment
to customize a build test from the shell. Example:
DPDK_MESON_OPTIONS="b_lto=true"
Some target-specific options can be added in the configuration file:
DPDK_MESON_OPTIONS="$DPDK_MESON_OPTIONS kernel_dir=$MYKERNEL"
Fixes: 2722367412 ("devtools: load target-specific compilation environment")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
It's reasonably common for patches to have issues when built on 32-bits, so
to prevent this, we can add a 32-bit build (if supported) to the
"test-meson-builds.sh" script. The tricky bit is using a valid
PKG_CONFIG_LIBDIR, so for now we use two common possibilities for where that
should point to in order to get a successful build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Use the newer macros defined by meson in all DPDK source code, to ensure
there are no errors when the old non-standard macros are removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Rather than specifying specific drivers in the driver directory to load, we
can just pass in the whole driver directory to the "-d" EAL flag, causing
all drivers to load. This makes the load of driver independent of any
specific driver names.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Updating export files (supposed to disappear at some point, but still
there) might be missed when removing symbols in the API / map files.
Add a check for this case.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Changed scripts to explicitly use Python 3 only, to avoid
maintaining Python 2.
Removed deprecation notices.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Make is no longer supported, the test script for make builds is no
longer required. Uses of make in other tool scripts are replaced.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The default git branch of the main DPDK repository has been renamed
from master to main.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The script was using the full ABI version, including the minor number,
to version the symbols in the map files.
It is fixed to use only the major number for symbol versioning.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The PREFER_FALLTHROUGH check warns if a passthrough comment is found
because, in the kernel, the special macro "fallthrough" is preferred.
Since that keyword is not defined in DPDK, ignore the warning.
Ignoring this check does not affect the MISSING_BREAK check that will
warn if a switch case/default is not preceded by break or a fallthrough
comment.
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Change variable names in the shell script.
Replace whitelist with include_files and blacklist with exclude_files.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
When all checks are completed on the specified commit logs, the script
indicates if all are valid, or if there were some failures.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch modifies the arguments expected by the check-git-log script,
to match the format of arguments for the checkpatches script. Both
scripts now take certain argument options in the same format, making
them easier to use.
e.g. Both now take a commit ID range by "-r <range>"
The checkpatches help print is also updated to include the "-h" option.
The contributor's guide includes the usage of both the checkpatches and
check-git-log scripts, which needed to be updated to reflect the now
standardised format.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
The script checkpatch.pl (used in checkpatches.sh) can use a dictionary
from the codespell project to check spelling.
There are multiple dictionaries to be used.
The script build-dict.sh concatenate multiple dictionaries and remove
some annoying false positives.
The dictionary built by this script must be saved in a file which
is referenced with the environment variable DPDK_CHECKPATCH_CODESPELL.
The easiest is to export this variable in ~/.config/dpdk/devel.config.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
-DALLOW_EXPERIMENTAL_API is always set for in-tree compilation since
https://git.dpdk.org/dpdk/commit/?id=acec04c4b2f5
Warn people not to copy/paste this flag that was needed before.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Prepare for python2 removal in 20.11.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Use C11 atomic builtins with explicit ordering instead of rte_atomic
ops which enforce unnecessary barriers on aarch64.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Suggested-by: Dodji Seketeli <dodji@redhat.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In order to deprecate the rte_atomic and rte_smp barrier APIs [1], prevent
the patches from using these APIs and __sync builtins in new code.
Please use __atomic builtins instead of __sync builtins, rte_atomicNN_xxx
and rte_smp_[r/w]mb APIs.
On x86 the __atomic_thread_fence(__ATOMIC_SEQ_CST) is quite expensive for
SMP case. Flag the new code which use __atomic_thread_fence API.
Please use rte_thread_fence API instead of __atomic_thread_fence builtins.
1: Refer to the locks-and-atomic-operations section in
https://doc.dpdk.org/guides/prog_guide/writing_efficient_code.html
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
abidiff can provide some more information about the ABI difference it
detected.
In all cases, a discussion on the mailing must happen but we can give
some hints to know if this is a problem with the script calling abidiff,
a potential ABI breakage or an unambiguous ABI breakage.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Aaron Conole <aconole@redhat.com>
The event status is defined as a volatile variable and shared between
threads. Use C11 atomic built-ins with explicit ordering instead of
rte_atomic ops which enforce unnecessary barriers on aarch64.
The event status has been cleaned up by the compare-and-swap operation
when we free the event data, so there is no need to set it to invalid
after that.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Harman Kalra <hkalra@marvell.com>
Having a special versioning for experimental/internal libraries put a
additional maintenance cost while this status is already announced in
MAINTAINERS and the library headers/documentation.
Following discussions and vote at 05/20 TB meeting [1], use a single
versioning for all libraries in DPDK.
Note: for the ABI check, an exception [2] had been added when tweaking
this special versioning [3].
Prefer explicit libabigail rules (which will be dropped in 20.11).
1: https://mails.dpdk.org/archives/dev/2020-May/168450.html
2: https://git.dpdk.org/dpdk/commit/?id=23d7ad5db41c
3: https://git.dpdk.org/dpdk/commit/?id=ec2b8cd7ed69
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
An expression with a space is split by the awk script resulting in
false positive for any patch matching any of the two part of the
expression.
Fix this by using [[:space:]].
Fixes: 43e73483a4 ("devtools: forbid variable declaration inside for")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Fix displayed filename by adjusting the extraction from the patch.
Before:
Warning in /lib/librte_eal/linux/eal.c:
After:
Warning in lib/librte_eal/linux/eal.c:
Fixes: 7413e7f2ae ("devtools: alert on new calls to exit from libs")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
The Linux checkpatch default is warning on the use of ENOSYS.
This is allowed in DPDK API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When building an ABI reference with meson, some static libraries
are built and linked in apps. They are useless and take a lot of space.
Those binaries, and other useless files (examples and doc files)
in the share/ directory, are removed after being installed.
In order to save time when building the ABI reference,
the examples (which are not installed anyway) are not compiled.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Some compilers raise an error when declaring a variable
in the middle of a function. This is a C99 allowance.
Even if DPDK switches globally to C99 or C11 standard,
the coding rules are for declarations at the beginning
of a block:
http://doc.dpdk.org/guides/contributing/coding_style.html#local-variables
This coding style is enforced by adding a check of
the common patterns like "for (int i;"
The occurrences of the checked pattern are fixed:
'for *(\(char\|u\?int\|unsigned\|s\?size_t\)'
In the file dpaa2_sparser.c, the fix is to remove the unused macros.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The pkg-config file was tested by building some of the examples using make,
pulling the cflags and ldflags from the pkg-config file for DPDK. However,
this only tested the shared library linkage, and not the static, so this
patch updates it to test both.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Sunil Pai G <sunil.pai.g@intel.com>
The Meson cross file is renamed from meson_mingw.txt to cross-mingw,
and is added to test-meson-builds.sh.
The only example supported on Windows so far is "helloworld",
that's why the default list of examples is overridden.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add cross-compilation support of a PPC target in the build test matrix.
The CPU is defined as Power8, running as little endian.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
If a compiler is not found in $PATH, the compilation test is skipped.
In some cases, the compiler could be found after extending $PATH
in an environment configuration script (called by load-devel-config).
The decision to skip is deferred to a later stage, after loading the
configuration script.
In such case, the variable DPDK_TARGET, used by the configuration script
as input, is the compiler name.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Each cross-compilation case needs to define the target compiler
and the meson cross file.
Given the compiler is already defined in the cross file,
the latter is enough.
The function "build" is changed to accept a cross file alternatively
to the compiler name. In the case of a file (detected if readable),
the compiler is extracted with sed and tr, and the option --cross-file
is automatically added.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Since we've moved away from our initial validate-abi.sh script,
in favor of check-abi.sh, which uses libabigail,
remove the old script from the tree, and update the docs accordingly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is no point in forcing warning-free compilation when building
an ABI reference. It is only preventing from compiling ABI reference
of old releases with recent compilers.
Note: DPDK 20.02 is built (with warnings) by GCC 10 if using -fcommon.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
INTERNAL is a newly introduced version, update the script used to bump
ABI in all map files but leaving internal section exactly as it is.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
INTERNAL is a newly introduced version, update the shell script that
checks whether built libraries are versioned with expected ABI
(current ABI, current ABI + 1, EXPERIMENTAL, or INTERNAL).
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Glob is the terminology used in fnmatch man page.
Use glob terminology across DPDK for shell pattern.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which are not to be exported.
rte_dpaa_mem_ptov - static inline in the headerfile
fman_ccsr_map_fd - local shared variable.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
This patch also removes two symbols, which were not used
anywhere else i.e. rte_fslmc_vfio_dmamap & dpaa2_get_qbman_swp
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Move mlx5 symbols in the map file to the INTERNAL section and add
__internal tags to their definitions.
Those symbols were exported in 20.02 and now (20.05) they are removed.
Avoid ABI comparison issues between 20.05/20.08 and 20.02 by adding the
suppress_file directive to libabigail.abignore file. This directive will
prevent loading mlx5 common symbols and no comparison will be performed.
In addition move symbols from the EXPERIMENTAL section to the INTERNAL
section.
Fixes: 7b4f1e6bd3 ("common/mlx5: introduce common library")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Move the internal symbols to INTERNAL sections so that any
change in them is not reported as ABI breakage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Move the internal symbols to INTERNAL sections so that any
change in them is not reported as ABI breakage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
This patch adds versioned function rte_cryptodev_info_get()
to prevent some issues with ABI policy.
Node v21 works in same way as before, returning driver capabilities
directly to the API caller. These capabilities may include new elements
not part of the v20 ABI.
Node v20 function maintains compatibility with v20 ABI releases
by stripping out elements not supported in v20 ABI. Because
rte_cryptodev_info_get is called by other API functions,
rte_cryptodev_sym_capability_get function is versioned the same way.
Fixes: b922dbd38c ("cryptodev: add ChaCha20-Poly1305 AEAD algorithm")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds CPU flags which will enable the detection of ISA
features available on more recent x86 based CPUs.
The CPUID leaf information can be found in
Table 1-2. "Information Returned by CPUID Instruction" of this document:
https://software.intel.com/sites/default/files/managed/c5/15/architecture-instruction-set-extensions-programming-reference.pdf
The following CPU flags are added in this patch:
- AVX-512 doubleword and quadword instructions.
- AVX-512 integer fused multiply-add instructions.
- AVX-512 conflict detection instructions.
- AVX-512 byte and word instructions.
- AVX-512 vector length instructions.
- AVX-512 vector bit manipulation instructions.
- AVX-512 vector bit manipulation 2 instructions.
- Galois field new instructions.
- Vector AES instructions.
- Vector carry-less multiply instructions.
- AVX-512 vector neural network instructions.
- AVX-512 for bit algorithm instructions.
- AVX-512 vector popcount instructions.
- Cache line demote instructions.
- Direct store instructions.
- Direct store 64B instructions.
- AVX-512 two register intersection instructions.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Change references to ABI 20.0.1 to use ABI v21, see
https://doc.dpdk.org/guides/contributing/abi_policy.html#general-guidelines
"Major ABI versions are declared no more frequently than yearly.
Compatibility with the major ABI version is mandatory in subsequent
releases until a new major ABI version is declared."
Combined ABI policy and versioning in maintainers, add map files to the
filter to more closely monitor future ABI changes.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Ignore the internal version ABI check, this kind of ABI is used only
by drivers and libraries.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Introduce the __rte_internal tag to mark internal ABI function which is
used only by the drivers or other libraries.
Like for __rte_experimental, this tag must be on a separate line before
function proprotypes.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
The tracepoint symbols __rte_*_trace_* are defined via a macro,
adding prefix "__", so they cannot be found by map checker.
Those symbols defined by RTE_TRACE_POINT and RTE_TRACE_POINT_FP
are checked in source code without the generated prefix.
The same logic is applied to per core variables, previously skipped.
Fixes: 6c232fc44c ("trace: add generic tracepoints")
Fixes: 4931010619 ("trace: add alarm tracepoints")
Fixes: 52f409d614 ("trace: add memory tracepoints")
Fixes: 402321cfca ("trace: add memzone tracepoints")
Fixes: 0baa1e01c3 ("trace: add thread tracepoints")
Fixes: 05c4105738 ("trace: add interrupt tracepoints")
Fixes: 78d44153de ("ethdev: add tracepoints")
Fixes: 32e326869e ("eventdev: add tracepoints")
Fixes: 4cf30e3f3c ("cryptodev: add tracepoints")
Fixes: 40b75c73d1 ("mempool: add tracepoints")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
One of the reasons to destroy a flow is the fact that no packet matches
the flow for "timeout" time.
For example, when TCP\UDP sessions are suddenly closed.
Currently, there is not any DPDK mechanism for flow aging and the
applications use their own ways to detect and destroy aged-out flows.
The flow aging implementation need include:
- A new rte_flow action: RTE_FLOW_ACTION_TYPE_AGE to set the timeout and
the application flow context for each flow.
- A new ethdev event: RTE_ETH_EVENT_FLOW_AGED for the driver to report
that there are new aged-out flows.
- A new rte_flow API: rte_flow_get_aged_flows to get the aged-out flows
contexts from the port.
- Support input flow aging command line in Testpmd.
The new event type addition in the enum is flagged as an ABI breakage,
so an ignore rule is added for these reasons:
- It is not changing value of existing types (except MAX)
- The new value is not used by existing API if the event is not
registered
In general, it is safe adding new ethdev event types at the end of the
enum, because of event callback registration mechanism.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Introduce relaxed tail sync (RTS) mode for MT ring synchronization.
Aim to reduce stall times in case when ring is used on
overcommited cpus (multiple active threads on the same cpu).
The main difference from original MP/MC algorithm is that
tail value is increased not by every thread that finished enqueue/dequeue,
but only by the last one.
That allows threads to avoid spinning on ring tail value,
leaving actual tail value change to the last thread in the update queue.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
When running make with CONFIG_RTE_BUILD_SHARED_LIB=n,
no shared library is built.
In this case, no need to run ABI check.
With meson, both shared and static libraries are always built.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: David Marchand <david.marchand@redhat.com>
Static builds can take a lot of space, so reduce the number of examples
built when testing those static builds.
As makefile-based build is close to end of life, completely skip examples
in case of static linkage with make.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The keyword __attribute__ will emit a warning,
because it is preferred to use or define a common __rte macro.
The centralized macros may help to control or workaround some compilers.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The arch-specific directories arm, ppc and x86 in common/include/arch/
are moved as include/ sub-directories of respective arch directories:
- arm/include/
- ppc/include/
- x86/include/
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The arch-specific directories arm, ppc and x86 in common/arch/
are moved at the same level as the OS-specific directories.
It makes more clear that EAL is covering a matrix combining OS and arch.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Installing with ninja is quite verbose by default, hide ninja output under
TEST_MESON_BUILD_VERBOSE and TEST_MESON_BUILD_VERY_VERBOSE options.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fix check symbol change script to detect new diff file when
it is in between "--- /dev/null" to "b/lib/...".
Current awk line expects line to start with "a/..."
which is not always true for all diffs.
As a result if in_map was '1' earlier, it will not be changed
to '0' and we get check patch errors which are not true.
Fixes: 4bec48184e ("devtools: add checks for ABI symbol addition")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Moved title syntax to a separate file so that it improves code
readability and allows easy addition.
Also logic changed from checking for bad pattern to checking good
pattern which documents the expected syntax more clearly, and does not
have gaps in the checks.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
During backporting, if the fixes or stable tag are missing,
it usually requires some investigation by stable maintainer
as to why.
The presence of a fixes tag may be known from whether the
originating release of the issue is printed at the end of the
line but with variable line lengths and nested partial fixes
it doesn't catch the eye.
When there are a large amount of commits, adding an aligned column
indicating the presence of a fixes tag beside the stable one makes
it easier to quickly see the patches requiring further investigation.
e.g.
20.02 8f33cbcfa S F net/i40e/base: fix buffer address (16.04)
20.02 4b3da9415 S F net/i40e/base: fix error message (1.7.0)
20.02 1da546c39 - F net/i40e/base: fix missing link modes (17.08)
20.02 79bfe7808 S F net/i40e/base: fix Tx descriptors number (1.7.0)
20.02 50126939c - F net/i40e/base: fix retrying logic (18.02)
20.02 dcd05da0a S F app/testpmd: fix GENEVE flow item (18.02)
20.02 b0b9fdad2 S - net/bnx2x: support secondary process (N/A)
20.02 f8279f47d S F net/netvsc: fix crash in secondary process (18.08)
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
C99-style comments are not permitted according to DPDK coding
style guidelines, enable checking for these by checkpatch.pl.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
We don't provide ABI compatibility for experimental libraries.
Skip those libraries by catching a soname containing a version starting
with '0.'.
Align the special case for the glue libraries by using the soname too.
Once libabigail has support for it, we will have a single type of rule.
Fixes: 777014e56d ("devtools: add ABI checks")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Mellanox owns Tilera and EZchip, so the copyrights can be converted.
At the same time, the license header is switched to SPDX tag format,
and a typo is fixed in another copyright line.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The Linux kernel modules kni and igb_uio were disabled by default
so they need a new option (+kmods) for testing compilation.
Some recent features were not enabled in compilation testing:
- mlx5 vDPA (depends on libibverbs)
- ifpga (depends on libfdt)
- ipn3ke (depends on libfdt)
- Arm WFE
Check on libfdt availability is added, and not considered as a fix.
Fixes: 91a861e541 ("config: disable Linux kernel modules by default")
Fixes: 95276abaaf ("vdpa/mlx5: introduce Mellanox vDPA driver")
Fixes: 1be7855d77 ("eal: add wait until equal API")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Link against Intel IPsec Multi-buffer library, which
added support for SNOW3G-UEA2 and SNOW3G-UIA2 from version v0.53,
moving from libSSO SNOW3G library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for KASUMI-F8 and KASUMI-F9 from version v0.53,
moving from libSSO KASUMI library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Link against Intel IPsec Multi-buffer library, which
added support for ZUC-EEA3 and ZUC-EIA3 from version v0.53,
moving from libSSO ZUC library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For normal developers, those checks are disabled.
Enabling them requires a configuration that will trigger the ABI dumps
generation as part of the existing devtools/test-build.sh and
devtools/test-meson-builds.sh scripts.
Those checks are enabled in the CI for the default meson options on x86
and aarch64 so that proposed patches are validated via our CI robot.
A cache of the ABI is stored in travis jobs to avoid rebuilding too
often.
Checks can be informational only, by setting ABI_CHECKS_WARN_ONLY when
breaking the ABI in a future release.
Explicit suppression rules have been added on internal structures
exposed to crypto drivers as the current ABI policy does not apply to
them.
This could be improved in the future by carefully splitting the headers
content with application and driver "users" in mind.
We currently have issues reported for librte_crypto recent changes for
which suppression rules have been added too.
Mellanox glue libraries are explicitly skipped as they are not part of
the application ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
No functional change intended, prepare for reusing this code.
The config and compilation parts are separated in helpers.
Unsetting CC is moved to the caller of the helper.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Drivers librte_mempool_ring.so and librte_pmd_null.so are loaded by
librte_eal.so when running testpmd.
In Ubuntu Xenial, driver path is installed to RPATH on testpmd. This
allows librte_eal.so to find drivers by using the RPATH.
However, in Ubuntu Bionic, driver path is installed to RUNPATH instead.
The RUNPATH on testpmd is not available by librte_eal.so and therefore
lead to driver load failure:
EAL: Detected 32 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: librte_mempool_ring.so: cannot open shared object file:
No such file or directory
EAL: FATAL: Cannot init plugins
EAL: Cannot init plugins
Add 'drivers' into LD_LIBRARY_PATH so that testpmd can find and make
use of these shared libraries.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
When testing build with +debug options, the statistics are enabled.
It was wrongly matching CONFIG_RTE_IBVERBS_LINK_STATIC.
The pattern is fixed to match only statistics config options.
Fixes: 2c0dd7b69f ("config: add static linkage of mlx dependency")
Cc: stable@dpdk.org
Reported-by: Ali Alnubani <alialnu@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
By default, both test-build.sh and test-meson-builds.sh scripts create the
builds they generate in the current working directory, leading to a large
number of build directories being present when testing patches. This
patchset modifies both scripts to use a DPDK_BUILD_TEST_DIR environment
variable to control where the build outputs are put.
For example, doing:
export DPDK_BUILD_TEST_DIR=__builds
./devtools/test-meson-builds.sh && ./devtools/test-build.sh \
x86_64-native-linux-clang+shared i686-native-linux-gcc
gives a "__builds" directory with 14 meson and 2 make builds (with the
meson build count depending on compiler availability)
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Those scripts are only used by developers and not part of the build
process.
Move them to devtools so they are not installed.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Let's try to check for discrepancies in coverity and bugzilla tags.
The contributing guide specifies that:
- for coverity issues, the tag is 'Coverity issue:'
- for bugzilla issues, the tag is 'Bugzilla ID:'
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Same idea than overriding PATH and PKG_CONFIG_PATH, it can be quite
useful to override compilation flags like CFLAGS, CPPFLAGS and LDFLAGS
for cross compilation or libraries that won't provide a pkg-config file.
Fixes: 2722367412 ("devtools: load target-specific compilation environment")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Following [1], testpmd memory consumption has skyrocketted.
The rte_port structure has gotten quite fat.
struct rte_port {
[...]
struct rte_eth_rxconf rx_conf[65536]; /* 266280 3145728 */
/* --- cacheline 53312 boundary (3411968 bytes) was 40 bytes ago --- */
struct rte_eth_txconf tx_conf[65536]; /* 3412008 3670016 */
/* --- cacheline 110656 boundary (7081984 bytes) was 40 bytes ago --- */
[...]
/* size: 8654936, cachelines: 135234, members: 31 */
[...]
testpmd handles RTE_MAX_ETHPORTS ports (32 by default) which means that it
needs ~256MB just for this internal representation.
The reason is that a testpmd rte_port (the name is quite confusing, as
it is a local type) maintains configurations for all queues of a port.
But where you would expect testpmd to use RTE_MAX_QUEUES_PER_PORT as the
maximum queue count, the rte_port uses MAX_QUEUE_ID set to 64k.
Prefer the ethdev maximum value.
After this patch:
struct rte_port {
[...]
struct rte_eth_rxconf rx_conf[1025]; /* 8240 49200 */
/* --- cacheline 897 boundary (57408 bytes) was 32 bytes ago --- */
struct rte_eth_txconf tx_conf[1025]; /* 57440 57400 */
/* --- cacheline 1794 boundary (114816 bytes) was 24 bytes ago --- */
[...]
/* size: 139488, cachelines: 2180, members: 31 */
[...]
With this, we can ask for less memory in test-null.sh.
[1]: https://git.dpdk.org/dpdk/commit/?id=436b3a6b6e62
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch functionally reverts the patch in fixes line to not have any
hardcoded library path in the final binary for the security reasons, in
case this binary distributed to production environment.
RPATH only added in RTE_DEVEL_BUILD case and this binary shouldn't
distributed, but still removing it to be cautious.
Fixes: 8919f73bcb ("mk: add build directory to library search path")
Cc: stable@dpdk.org
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The script test-null.sh is supposed to do a quick and simple
run of testpmd with null PMD only, for sanity check.
As it is not supposed to test probing of any other PMD,
physical device probing is switched to whitelist mode
by using a fake PCI address (0:0.0).
It will also help to keep memory usage stable across platforms.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The list of Arm configs is growing:
config/arm/arm64_armada_linux_gcc
config/arm/arm64_armv8_linux_gcc
config/arm/arm64_bluefield_linux_gcc
config/arm/arm64_dpaa_linux_gcc
config/arm/arm64_emag_linux_gcc
config/arm/arm64_n1sdp_linux_gcc
config/arm/arm64_octeontx2_linux_gcc
config/arm/arm64_thunderx2_linux_gcc
config/arm/arm64_thunderx_linux_gcc
In order to keep testing time reasonable,
and also because n1sdp is merged without a related fix in tests,
the list of configs is reduced in the script test-meson-builds.sh.
The list of tested Arm builds becomes:
build-arm64-host-clang (armv8a)
build-arm64-bluefield
build-arm64-dpaa
build-arm64-octeontx2
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Not all versions of pkg-config in distros have support for the
--define-prefix flag [1], causing errors when building examples manually or
with test-meson-builds.sh script [2].
For the former case, we need to remove the hard-coded use of the flag in
the Makefiles.
For the latter case, the flag is necessary for builds to succeed, so we
skip the tests when it's not present, passing it as part of the pkg-config
command if it is supported.
[1]
CentOS Linux release 7.7.1908 (Core)
pkg-config version 0.27.1
[2]
## Building cmdline
Unknown option --define-prefix
gmake: Entering directory
`...ild-x86-default/install-root/usr/local/share/dpdk/examples/cmdline'
rm -f build/cmdline build/cmdline-static build/cmdline-shared
test -d build && rmdir -p build || true
Unknown option --define-prefix
Unknown option --define-prefix
gcc -O3 main.c commands.c parse_obj_list.c -o build/cmdline-shared
main.c:14:28: fatal error: cmdline_rdline.h: No such file or directory
Fixes: ca9268529d ("examples: support relocated DPDK install")
Fixes: 7f80a2102b ("devtools: test pkg-config file")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
The regexp part of the cleanup routine was not updated accordingly when
a common prefix for temp files was introduced.
Set the trap handler only when required.
Fixes: ff37ca5d37 ("devtools: use a common prefix for temporary files")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
When trying to compile some examples with libdpdk.pc,
the right environment (for default target) was not loaded.
The consequence is to not detect some dependencies because
of missing directories in PKG_CONFIG_PATH.
The environment preparation is moved to a dedicate function,
and called for the default target (cc),
before testing the install output of the default build.
Fixes: 2722367412 ("devtools: load target-specific compilation environment")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The nfb PMD is disabled by default because of its dependency
on netcope-common package.
The variable DPDK_DEP_NFB was introduced but not used to notify
the dependency availability in the build test script.
The AF_XDP PMD is disabled by default because of its dependency
on libbpf on Linux.
An option was missing to notify the dependency availability
in the build test script.
Fixes: 6435f9a0ac ("net/nfb: add new netcope driver")
Fixes: f1debd77ef ("net/af_xdp: introduce AF_XDP PMD")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The meson build test fails if ccache is not available.
The use of ccache must be optional.
And if used, the compiler to check is the last word of $CC.
Fixes: e0ae780e65 ("devtools: test compiler availability only once")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
In order to re-use the same test environment as with
test-build.sh, the configuration file is loaded at each build,
after adjusting the variable DPDK_TARGET.
This is especially useful to set the variable PKG_CONFIG_PATH,
or define some meson options (without -D) in DPDK_MESON_OPTIONS.
The DPDK_TARGET values can be
aarch64-*, powerpc64-*, x86_64-*.
The matching DPDK_TARGET values for test-build.sh are
arm64-*, ppc_64-*, x86_64-*.
The advised expressions to use in the common configuration file are:
if echo $DPDK_TARGET | grep -q '^a.*64-' ; then
elif echo $DPDK_TARGET | grep -q '^p.*pc.*64' ; then
elif echo $DPDK_TARGET | grep -q '^x86_64' ; then
fi
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
The compilation test is skipped if the compiler is not available.
In the case of gcc/arm, it was tested both in the generic function
"build" and in the cross-compilation section.
By passing the compiler as argument of the generic function,
the test with "command" is done only once.
This small clean-up has the benefit of introducing the compiler
parameter to be used later in another improvement.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
In order to ease basic testing with customized options,
EAL and testpmd options can be added as third and fourth arguments
of the "null PMD" script.
Also, the first argument becomes more flexible by accepting
the testpmd path as an alternative to the build directory.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
