Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Restrict this header inclusion to its real users.
Fixes: 028669bc9f ("eal: hide shared memory config")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
With VERBOSE=1, this error was seen in debug mode with gcc 9.1:
In file included from /tmp/dpdk.auto-config-h.sh.c.w0VWMi:1:
In file included from rdma-core/build/include/infiniband/mlx5dv.h:47:
In file included from rdma-core/build/include/infiniband/verbs.h:46:
In file included from rdma-core/build/include/infiniband/verbs_api.h:66:
In file included from rdma-core/build/include/infiniband/ib_user_ioctl_verbs.h:38:
include/rdma/ib_user_verbs.h:161:28: fatal error:
zero size arrays are an extension [-Wzero-length-array]
__aligned_u64 driver_data0;
^
1 error generated.
As a result, buildtools/auto-config-h.sh was not generating
a correct autoconf file, so the compilation was generating such error:
fatal error: redefinition of 'mlx5_ib_uapi_flow_action_packet_reformat_type'
It is fixed by disabling -pedantic option when calling auto-config-h.sh
from the makefile-based system.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Matan Azrad <matan@mellanox.com>
If rdma-core is not installed in a standard directory of the system,
it is possible to specify the location of the pkgconfig file via
an environment variable:
PKG_CONFIG_PATH=$PKG_CONFIG_PATH:~/rdma-core/build/lib/pkgconfig
In this case, the dependency may become mandatory to specify
for the configuration tests (checking dependency symbols or fields).
Some spacing is also fixed around.
Fixes: 8e49376400 ("net/mlx4: add external allocator for Verbs object")
Fixes: 1dd7c7e38c ("net/mlx4: support meson build")
Fixes: 96d7c62a70 ("net/mlx5: support meson build")
Cc: stable@dpdk.org
Suggested-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Matan Azrad <matan@mellanox.com>
The AltiVec header file breaks boolean type:
error: incompatible types when initializing type
'__vector _bool int' {aka '_vector(4) __bool int'} using type 'int'
If __APPLE_ALTIVEC__ is defined, then bool type is redefined
and conflicts with stdbool.h.
There is no good solution to fix it for the whole project without
breaking something else, so a workaround is inserted in mlx5 PMD.
This workaround is not compatible with C++ but there is no C++ in DPDK.
Related to: 725f5dd0bf ("net/mlx5: fix build on PPC64")
Cc: stable@dpdk.org
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Matan Azrad <matan@mellanox.com>
mlx4_dev_info_get calls mlx4_get_ifname, but mlx4_get_ifname
uses priv->ctx which is not a valid pointer in a secondary
process. The fix is to cache the value in primary.
In the primary process, get and store the interface index of
the device so that secondary process can see it.
Bugzilla ID: 320
Fixes: 61cbdd4194 ("net/mlx4: separate device control functions")
Cc: stable@dpdk.org
Reported-by: Suyang Ju <sju@paloaltonetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matan Azrad <matan@mellanox.com>
A spelling mistake was found in comment.
This patch fixes it.
Fixes: 8e49376400 ("net/mlx4: add external allocator for Verbs object")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The incriminated commit broke the use of RTE_PCI_DRV_IOVA_AS_VA which
was intended to mean "driver only supports VA" but had been understood
as "driver supports both PA and VA" by most net drivers and used to let
dpdk processes to run as non root (which do not have access to physical
addresses on recent kernels).
The check on physical addresses actually closed the gap for those
drivers. We don't need to mark them with RTE_PCI_DRV_IOVA_AS_VA and this
flag can retain its intended meaning.
Document explicitly its meaning.
We can check that a driver requirement wrt to IOVA mode is fulfilled
before trying to probe a device.
Finally, document the heuristic used to select the IOVA mode and hope
that we won't break it again.
Fixes: 703458e19c ("bus/pci: consider only usable devices for IOVA mode")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently mlx4/mlx5 support only Linux.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Now that everything that has ever accessed the shared memory
config is doing so through the public API's, we can make it
internal. Since we're removing quite a few headers from
rte_eal_memconfig.h, we need to add them back in places
where this header is used.
This bumps the ABI, so also change all build files and make
update documentation.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, the memory hotplug is locked automatically by all
memory-related _walk() functions, but sometimes locking the
memory subsystem outside of them is needed. There is no
public API to do that, so it creates a dependency on shared
memory config to be public. Fix this by introducing a new
API to lock/unlock the memory hotplug subsystem.
Create a new common file for all things mem config, and a
new API namespace rte_mcfg_*, and search-and-replace all
usages of the locks with the new API.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Transmit errors must not be reported in q_errors[] which is for
reception.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Currently, IPC API will silently ignore unsupported IPC.
Fix the API call and its callers to explicitly handle
unsupported IPC cases.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, IPC API will silently ignore unsupported IPC.
Fix the API call and its callers to explicitly handle
unsupported IPC cases.
For primary processes, it is OK to not have IPC because
there may not be any secondary processes in the first place,
and there are valid use cases that disable IPC support, so
all primary process usages are fixed up to ignore IPC
failures.
For secondary processes, IPC will be crucial, so leave all
of the error handling as is.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
This driver should use dynamic log level not RTE_LOGTYPE_PMD.
Other drivers were converted back in 18.02.
This is really a bug, all other drivers use dynamic log levels
by now.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since this driver does not distinguish unicast/multicast addresses,
applications could always rely on the standard MAC add/remove/set
interface to configure both types.
As a result, the multicast address list interface never got implemented
(rte_eth_dev_set_mc_addr_list()) however PMD-agnostic applications still
rely on it for compatibility reasons; a wrapper is therefore required.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
mlx4 driver has a global list of Memory Regions created by
device, and there is a ml4_mr_release() routine which makes
a memory cleanup at device closing. The head of device MR list
was fetched outside the rwlock protected section. Also some
noticed typos are fixed.
Fixes: 9797bfcce1 ("net/mlx4: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If MLNX_OFED is installed, there's no .pc file installed for libraries and
dependency() can't find libraries by pkg-config. By adding fallback of
using cc.find_library(), libraries are properly located.
Fixes: e30b4e566f ("build: improve dependency handling")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Luca Boccassi <bluca@debian.org>
UAR (User Access Region) register does not need to be remapped for
primary process but it should be remapped only for secondary process.
UAR register table is in the process private structure in
rte_eth_devices[],
(struct mlx4_proc_priv *)rte_eth_devices[port_id].process_private
The actual UAR table follows the data structure and the table is used
for both Tx and Rx.
For Tx, BlueFlame in UAR is used to ring the doorbell.
MLX4_TX_BFREG(txq) is defined to get a register for the txq. Processes
access its own private data to acquire the register from the UAR table.
For Rx, the doorbell in UAR is required in arming CQ event. However, it
is a known issue that the register isn't remapped for secondary process.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
If rdma-core library doesn't support remapping UAR registers, the register
shouldn't be unmapped on device stop.
Fixes: 0203d33a10 ("net/mlx4: support secondary process")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The Memory Region (MR) for DMA memory can't be created from secondary
process due to lib/driver limitation. Whenever it is needed, secondary
process can make a request to primary process through the EAL IPC
channel (rte_mp_msg) which is established on initialization. Once a MR
is created by primary process, it is immediately visible to secondary
process because the MR list is global per a device. Thus, secondary
process can look up the list after the request is successfully returned.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new PMD parameter (mr_ext_memseg_en) is added to control extension of
memseg when creating a MR. It is enabled by default.
If enabled, mlx4_mr_create() tries to maximize the range of MR
registration so that the LKey lookup tables on datapath become smalle
and get the best performance. However, it may worsen memory utilization
because registered memory is pinned by kernel driver. Even if a page in
the extended chunk is freed, that doesn't become reusable until the
entire memory is freed and the MR is destroyed.
To make freed pages available immediately, this parameter has to be
turned off but it could drop performance.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In order to support secondary process, a few features are required.
a) rdma-core library should allocate device resources using DPDK's
memory allocator.
b) UAR should be remapped for secondary processes. Currently, in order
not to use different data structure for secondary processes, PMD
tries to reserve identical virtual address space for both primary
and secondary processes.
c) IPC channel is necessary, which can be easily set with rte_mp APIs.
Through the channel, Verbs command FD is delivered to the secondary
process and the device stop/start event is also broadcast from
primary process.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
To support secondary process, the memory allocated by library such as
completion rings (CQ) and buffer rings (WQ) must be manageable by EAL,
in order to share it with secondary processes. With new changes in
rdma-core and kernel driver, it is possible to provide an external
allocator to the library layer for this purpose. All such resources
will now be allocated within DPDK framework.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
rte_eth_devices[] is not shared between primary and secondary process,
but a static array to each process. The reverse pointer of device
(priv->dev) becomes invalid if mlx4 supports secondary process.
Instead, priv has the pointer to shared data of the device,
struct rte_eth_dev_data *dev_data;
Two macros are added,
#define PORT_ID(priv) ((priv)->dev_data->port_id)
#define ETH_DEV(priv) (&rte_eth_devices[PORT_ID(priv)])
Cc: stable@dpdk.org
Suggested-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Original patch changed logic of function mlx4_flow_merge_eth().
The setting of flow->promisc was wrongly removed.
This patch adds the removed setting of flow->promisc, to restore
the required behavior.
Fixes: c0d2392631 ("net/mlx4: support flow w/o ETH spec and with VLAN")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The private structure stored in rte_eth_dev->data->dev_private
was named "struct priv".
In order to ease code browsing, the structure is renamed
"struct mlx[45]_priv".
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Whenever possible (if the library ships a pkg-config file) use meson's
dependency() function to look for it, as it will automatically add it
to the Requires.private list if needed, to allow for static builds to
succeed for reverse dependencies of DPDK. Otherwise the recursive
dependencies are not parsed, and users doing static builds have to
resolve them manually by themselves.
When using this API avoid additional checks that are superfluous and
take extra time, and avoid adding the linker flag manually which causes
it to be duplicated.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
The API function rte_eth_dev_fw_version_get() is querying drivers
via the operation callback fw_version_get().
The implementation of this operation is added for mlx4 and mlx5.
Both functions are copying the same ibverbs field fw_ver
which is retrieved when calling ibv_query_device[_ex]()
during the port probing.
It is tested with command "drvinfo" of examples/ethtool/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The original commit enabled the creation of flow rule with empty
ETH address and with specific VLAN.
It works fine on PF, but such flow rule is still rejected on VF due
to kernel limitation, which blocks MAC address of all zeroes.
This patch complements the original commit.
It sets byte 0 of MAC address to 0xFF.
Fixes: c0d2392631 ("net/mlx4: support flow w/o ETH spec and with VLAN")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The libraries provided by rdma-core may be statically linked
if enabling CONFIG_RTE_IBVERBS_LINK_STATIC in the make-based build.
If CONFIG_RTE_BUILD_SHARED_LIB is disabled, the applications
will embed the mlx PMDs with ibverbs and the mlx libraries.
If CONFIG_RTE_BUILD_SHARED_LIB is enabled,
the mlx PMDs will embed ibverbs and the mlx libraries.
Support with meson may be added later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rename options CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS and
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS to a single option
CONFIG_RTE_IBVERBS_LINK_DLOPEN.
Rename meson option enable_driver_mlx_glue to ibverbs_link.
There was no good reason for setting a different link option
for mlx4 and mlx5. Having a single common option makes it
easier to understand and unify make and meson systems.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
RTE_MBUF_INDIRECT() is replaced with RTE_MBUF_CLONED() and removed.
This macro was deprecated in release 18.05 when EXT_ATTACHED_MBUF was
introduced.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds to MLX4 PMD the option to set flow rules
with empty ether MAC and specific VLAN ID.
Note that this fix works with
1. CX-3 FW 2.42.5016 or higher.
2. mlxconfig configuration STEER_FORCE_VLAN set to 1.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When compiling with gcc -O1, this error appears:
drivers/net/mlx4/mlx4_ethdev.c: In function ‘mlx4_rxmode_toggle’:
rte_log.h:321:3: error:
‘mode’ may be used uninitialized in this function
The function mlx4_rxmode_toggle is never called with a value which
is not in the switch block, but GCC complains about it with -O1.
So the default case is "fixed" by setting string "undefined".
Fixes: eacaac7bae ("net/mlx4: restore promisc and allmulti support")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There's some performance drop due to extra condition checks on the
datapath. Checking for external memory registration should be consolidated
to the existing bottom-half.
Fixes: 31912d9924 ("net/mlx4: support externally allocated static memory")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch fixes compilation errors with meson and the clang
compiler caused by some of the struct members not being
initialized.
```
../drivers/net/mlx4/mlx4_mr.c:357:37: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx4_mr_cache entry = { 0, };
^
../drivers/net/mlx4/mlx4_mr.c:401:36: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx4_mr_cache ret = { 0, };
^
../drivers/net/mlx4/mlx4_mr.c:691:35: error: missing field 'end'
initializer [-Werror,-Wmissing-field-initializers]
struct mlx4_mr_cache ret = { 0, };
^
```
The compilation errors reproduce with
clang version 3.4.2 (tags/RELEASE_34/dot2-final) on RHEL.
Fixes: 9797bfcce1 ("net/mlx4: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The PCI mapping requires to know the PCI driver to use,
even before the probing is done. That's why the PCI driver is
referenced early inside the PCI device structure. See
commit 1d20a073fa ("bus/pci: reference driver structure before mapping")
However the rte_driver does not need to be referenced in rte_device
before the device probing is done.
By moving back this assignment at the end of the device probing,
it becomes possible to make clear the status of a rte_device.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
When MLX PMD registers memory for DMA, it accesses the global memseg list
of DPDK to maximize the range of registration so that LKey search can be
more efficient. Granularity of MR registration is per page.
Externally allocated memory shouldn't be used for DMA because it can't be
searched in the memseg list and free event can't be tracked by DPDK. If it
is used, the following error will occur:
net_mlx5: port 0 unable to find virtually contiguous chunk for
address (0x5600017587c0). rte_memseg_contig_walk() failed.
There's a pending patchset [1] which enables externally allocated memory.
Once it is merged, users can register their own memory out of EAL then that
will resolve this issue.
Meanwhile, if the external memory is static (allocated on startup and never
freed), such memory can also be registered by little tweak in the code.
[1] http://patches.dpdk.org/project/dpdk/list/?series=1415
This patch is not a bug fix but needs to be included in stable versions.
Fixes: 9797bfcce1 ("net/mlx4: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Compile Mellanox driver when their external dependencies are met. A
glue version of the driver can still be requested by using the
-Denable_driver_mlx_glue=true
Meson will try to find the required external libraries. When they are
not installed system wide, they can be provided though CFLAGS, LDFLAGS
and LD_LIBRARY_PATH environment variables, example (considering
RDMA-Core is installed in /tmp/rdma-core):
# CLFAGS=-I/tmp/rdma-core/build/include \
LDFLAGS=-L/tmp/rdma-core/build/lib \
LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
meson output
# LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
ninja -C output install
Note: LD_LIBRARY_PATH before ninja is necessary when the meson
configuration has changed (e.g. meson configure has been called), in
such situation the LD_LIBRARY_PATH is necessary to invoke the
autoconfiguration script.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
