Descriptor valid mask should be 64-bit all ones, use
appropriate initializer type (unsigned long long) to
obtain correct value in 32-bit mode.
Fixes: deae85145c64 ("net/bnxt: handle multiple packets per loop in vector Rx")
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Check for num_rep before invoking rep port probe. num_rep should be !=0
if representor devargs provided.
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Thor based NICs can support PAM4 as wells as NRZ link negotiation.
With this patch we are adding support for 200G link speeds based on
PAM4 signaling. While PAM4 can negotiate speeds for 50G and 100G as
well, the PMD will use NRZ signalling for these speeds.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Initialize the global parameters structure to avoid segmentation fault
in the TRUFLOW global configuration set API.
Fixes: 0a58be6f7c1e ("net/bnxt: add access to NAT global register")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The pkt_type field in the profile TCAM table needs to be ignored and
should not be set to normal packet type. The pkt_type for the packets
that are segmented due to transmit segment offload feature in the driver
are not marked as normal pkt_type and this shall result in profile TCAM
table miss and flow not being offloaded hence resulting in the reduction
of the throughput.
Fixes: fe82f3e02701 ("net/bnxt: support exact match templates")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In the Stingray use case, representors are conventionally run
inside the SoC domain representing functions that are on the
X86 domain. In order to support this mechanism of building
representors for endpoints that are not in the same host domain,
additional dev args have been in the PMD like so:
rep-based-pf=<physical index> rep-is-pf=<VF=0 or PF=1>
where `rep-based-pf` specifies the physical index of the base PF
that the representor is derived off of.
Since representor(s) can be created for endpoint PFs as well,
rename struct bnxt_vf_representor to bnxt_representor and other such
dev_ops and function names.
devargs have also been extended to specify the exact CoS queue along
with flow control enablement to be used for the conduit between the
representor and the endpoint function.
This is how a sample devargs would look with all the extended devargs
-w 0000:06:02.0,host-based-truflow=1,representor=[1],rep-based-pf=8,
rep-is-pf=1,rep-q-r2f=1,rep-fc-r2f=0,rep-q-f2r=1,rep-fc-f2r=1
Call CFA_PAIR_ALLOC only in case of Stingray instead of CFA_VFR_ALLOC.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Set the TRUFLOW Enable bit in bp->flags only if the value passed in
devargs was 1. Otherwise set it to 0.
Fixes: 313ac35ac701 ("net/bnxt: support ULP session manager init")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In page_roundup() left shifting by more than 31 bits could have
undefined behavior as the return value is int and in page_getenum()
it is possible to return a value as high as 63.
Fix that to cap the return value to less than 32.
Coverity issue: 343463
Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
rx_queue_setup_op for representor was using a common function to
initialize the software data structures for the Rx ring. But that
routine has code to init other rings not needed for representors like
cp/agg ring etc.
Define and invoke a new function to setup structures just for the
representor Rx ring
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add a template to support ipv6 VXLAN flows to enable support for
vxlan decap for those flows.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Driver should not send the phy_cfg request to bring link down
during reset recovery. If the driver sends the phy_cfg request
in recovery process, then FW needs to re-establish the link which
in turn increases the recovery time based on PHY type and link partners.
Fixes: df6cd7c1f73a ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix to use correct value offset for PCI function stats.
Fixes: 5f9374de2a3a ("net/bnxt: add PCI function stats to extended stats")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Since the 20.08 release deprecated rte_cio_*mb APIs because these APIs
provide the same functionality as rte_io_*mb APIs on all platforms, so
remove them and use rte_io_*mb instead.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
def_cp_lock was added to sync race between dev_configure and
int_handler. It should not be used to synchronize scheduling of FW
health check between dev_start and async event handler as well,
use a separate mutex for the same.
Fixes: a73b8e939f10 ("net/bnxt: fix race between start and interrupt handler")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add a couple of NULL pointer checks in bnxt_free_all_filters()
and bnxt_free_vnics() respectively to guard against certain error
injection/recovery scenarios where it was found that the application
was crashing with the bp->vnic_info pointer being NULL.
Fixes: 51fafb89a9a0 ("net/bnxt: get rid of ff pools and use VNIC info array")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for mutex protection for the flow database to prevent
simultaneous access to flow database and protect flow creation and
deletion.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1.Representor Rx ring producer index was not getting reset in
the ring full case. Fix it by incrementing only in
success case.
2.Instead of calling the mbuf specific routine to free the mbuf when
representor ring is full rte_free was being called leading to
'invalid memory' errors being logged.
3. Do not account the pkt meant for the representor in the parent
Rx ring's array that is returned to the application.
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Some applications need switch_info of the device to be returned
as a part of eth_dev_info_get(). The offload logic in such
applications could use this info. Pass this info to the when VF
representors are configured.
Fixes: 322bd6e70272 ("net/bnxt: add port representor infrastructure")
Cc: stable@dpdk.org
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix out of bounds access in action bit handling.
The act_val is changed to be array to resolve out of bound access issue.
Fixes: 52799debdf1c ("net/bnxt: support action bitmap opcode")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for performing L3 or L4 rewrite for VLAN tagged
flows. The outer most DMAC, SMAC and VLAN are used to overwrite
when NAT operations are performed.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add code to support vxlan ipv6 tunnel encapsulation. The
ipv6 flow traffic class and flow label wild card match
can be ignored to support offload on some applications.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Instead of relying on value of Flow counter ID to determine validity
have an explicit boolean flag for the same to check and set.
Fixes: 306c2d28e247 ("net/bnxt: support count action in flow query")
Fixes: 9cf9c8385df7 ("net/bnxt: add ULP flow counter manager")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The number of internal stats counter is increased to 16k
in both egress and ingress direction.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Whitney platform does not support VLAN pop action in the egress
direction. Hence the VLAN pop action is removed from the egress
action templates.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Change interface tables to use direct or non-tunneled HWRM messaging
instead of tunneled messaging. Update HWRM API to a new version to
allow this change.
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If VF-rep port add fails for some reason, code was rolling back
all ports added so far. With some applications, there is no need
to do that. Just log failure message for the VF rep port add and
continue.
Also include RTE_MAX_ETH_PORTS value in the bounds check as one port
will be taken by the uplink port anyway
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Instead of bounds checking against max possible rings while selecting
queue index for the VF representor, do it against the number of rings
configured.
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
When parent VF or PF ports are cleaned up, the child VF representor
ports also need to be cleaned up. If not cleaned up, then deleting
the parent VF shall result in not cleaning up the hardware rules and
updating the firmware of VFR removal. The issue can occur even when
application is exited without deleting VFR ports.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The function id being used in the flush is incorrect, fixed the
flush of the flows.
Fixes: 74bcfc062489 ("net/bnxt: add session and function flow flush")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Change default flow rule to use 8-byte encap.
The VFR conduit uses VLAN encap to send packets. So the encap record
is changed from 16B to 8B. That frees up 8B of encap records.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Verify the resource manager has been allocated prior to using it.
This can avoid potential segmentation faults.
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When a Exact Match entry fails insertion, the allocated index needs to
be pushed back to the allocation stack. This patch takes care of that.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The ingress rule to match on ipv4 and ipv6 is now two rules to
make sure both rules can coexist at the same time. Added count
action only for ingress flows.
Fixes: fe82f3e02701 ("net/bnxt: support exact match templates")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Removed the mark id log message since it is in the data path.
Also optimized the link status debug message.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Changed the action template to support count action in addition
to a flow that does drop action.
Fixes: fe82f3e02701 ("net/bnxt: support exact match templates")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
The port deinitialization now cleans up all the resources
properly. If all the ports are stopped then ULP context is
freed.
Added fix to update the correct tfp pointer in the ULP context
with the changes to support multi control channels.
Fixes: 70e64b27af5b ("net/bnxt: support ULP session manager cleanup")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Simplify and optimize receive mbuf allocation function used
by the vector mode PMDs.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Use table to translate receive descriptor status flags to
rte_mbuf ol_flags values.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Increase the maximum supported burst size for the bnxt vector
mode PMD from 32 to 64.
With larger burst sizes, per-burst overhead is amortized over more
packets, improving overall performance. For small packets this has
been measured to provide a 4-10% increase in single-core throughput
with testpmd iofwd.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Don't allocate extra completion queue entries for aggregation
ring when aggregation ring will not be used.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Improve support for small ring sizes:
- Ensure that transmit free threshold is no more than 1/4 ring size.
- Ensure that receive free threshold is no more than 1/4 ring size.
- Validate requested ring sizes against minimum supported size.
- Use rxq receive free threshold instead of fixed maximum burst
size to trigger bulk receive buffer allocation.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Disable support for vector mode when async completions can be placed
in a receive completion ring and change the default for all platforms
to use a dedicated async completion ring.
Simplify completion handling in vector mode receive paths now that
it no longer needs to handle async completions.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Change the type of the software receive mbuf ring from an array
of structures containing an mbuf pointer to an array of pointers
to struct rte_mbuf for consistency with how this ring is currently
used by the vector mode receive function.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
