Some phy's take longer than others to come up. Add a retry to give
more phy's a chance to come up before returning an error.
Fixes: 2209c3e2c2 ("net/i40e: avoid PCI probing failure when using bogus SFP")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
ETHTOOL_GLINKSETTINGS ioctl call in mlx5 pmd returns inconsistent
link status due to which any application relying on it would not
function correctly.
Fixes: 1884087198 ("net/mlx5: fix support for newer link speeds")
Cc: stable@dpdk.org
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
If the current VLAN anti spoof setting is same as the new value,
the firmware can return an error. Call the HWRM command to update
the new setting if it is different from the current value.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The pci_id_ixgbe_map table has only PCI_ANY_ID for
.subvend and .subdev in all entries. Using of IXGBE_SUBDEV_ID_82599_SFP
for 'dev' is not correct. It generates the wrong PMD_INFO_STRING.
The output of the program "dpdk-pmdinfo.py" is confusing.
Signed-off-by: Leonid Myravjev <myravjev@amicon.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mirror rule id should not exceed the boundary defined by
IXGBE_MAX_MIRROR_RULES.
Fixes: fe3a45fd41 ("ixgbe: add VMDq support")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This patch sends the HWRM command to free a filter in the hardware,
before using it again.
Fixes: f92735db1e ("net/bnxt: add L2 filter alloc/init/free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly using a Rx side HWRM command set_rx_mask to configure
VLAN anti-spoof. This being a Tx side feature, this patch
tries to fix it.
Since the HWRM command to do it is available only in
the newer firmware versions, the patch verifies the firmware
version before attempting to send the HWRM command to
the firmware.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch resets the VF stats during initialization
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
remove the unnecessary rte_delay in bnxt_set_hwrm_link_config
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Check if the vnic_id and rss_rule is not invalid before passing it
to the firmware to cleanup the VNIC. Log a message if the vnic_id
is invalid.
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix use of local variable to avoid segfault.
cnt was incorrectly tested and decremented in the loop that removes
a VLAN from the table.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) handle_async_event is a DEBUG level log message.
2) Log "Unable to get default VNIC for VF %d" at INFO level.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Enable the functions set link down and set link up in i40e by check
phy_type, and fix the issue of auto negotiation failed in XXV710 when
bind kernel driver after unbind from DPDK driver by modify the speed
setting distinguish from set link up and down. With this fix, if unbind
DPDK to bind kernel driver, no need to set auto negotiation and ifconfig
up anymore, remove the part from doc.
Fixes: ca7e599d45 ("net/i40e: fix link management")
Fixes: 2f1e228174 ("i40e: skip link control as firmware workaround")
Fixes: 6e145fcc75 ("i40e: support autoneg or force link speed")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This NIC type port check should use port index
not mask for 82599ES.
Fixes: d9347d2540 ("net/ixgbe: support 82599ES SCTP packet drop action")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Only x550 family support SCTP port in FDIR filter, so
add this limitation when parse consistent API.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
If there's no Traffic Management node added. Not
necessary to check if TM is committed.
Fixes: cac29c3c00 ("net/i40e: support committing TM hierarchy")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
If there's no Traffic Management node added,
not necessary to check if TM is committed.
Fixes: 5713ade697 ("net/ixgbe: support committing TM hierarchy")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When use rte_eth_dev_configure() to enable rx queue interrupt for virtio
devices, virtio_init_device() isn't called to set up the interrupt
environment, which causes rx queue interrupt setup failed. This patch is
to fix this issue.
Fixes: 26b683b4f7 ("net/virtio: setup Rx queue interrupts")
Cc: stable@dpdk.org
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When virtio-net devices are bound to uio_pci_generic, we get
the wrong mac addr by virtio PMD. The wrong mac addr is a
addr that is 4-byte left shift of the correct addr.
It's a regression bug introduced by the cleanup patch below.
The condition of if we set use_msix should be if msix is
actually enabled. Only to check if there is a capability list
is not enough. For example, binding a transitional device
to uio_pci_device would trigger the wrong assignment of use_msix.
To correct that, we also check the flags of msix capability to
make sure it's enabled.
Fixes: ee1843bd89 ("net/virtio: remove redundant MSI-X detection")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This PMD supports hotplug, it is able to be detached.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
For larger packet size congestion is observed on Tx Queues.
This patch enables Tx Queue congestion state check support.
If congested, try to resend the packet few times.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
when creating a bond device in testpmd, a name for a device must meet
the correct convention described in the documentation:
The device name must start with the net_bonding prefix
followed by numbers or letters.
Change for ALB mempool allocation - mem_name was too long.
Fixes: 9bf4901d1a ("bus/vdev: remove probe with driver name option")
Cc: stable@dpdk.org
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
ctype.h is not compilable in BSD 10 on GCC 4.8 in C11 mode.
CC failsafe.o
In file included from /usr/include/_ctype.h:94:0,
from /usr/include/ctype.h:46,
from /root/dpdk.org/build/include/rte_common.h:50,
from /root/dpdk.org/build/include/rte_memory.h:57,
from /root/dpdk.org/build/include/rte_malloc.h:45,
from /root/dpdk.org/drivers/net/failsafe/failsafe.c:35:
/usr/include/runetype.h:92:22: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'const'
extern _Thread_local const _RuneLocale *_ThreadRuneLocale;
^
/usr/include/runetype.h: In function '__getCurrentRuneLocale':
/usr/include/runetype.h:96:6: error: '_ThreadRuneLocale' undeclareds
(first use in this function)
if (_ThreadRuneLocale)
^
The fix is to put GCC in gnu99 mode instead.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This patch add support for setting additional aggregator modes for
IEEE802.3AD in similar manner that are supported in kernel mode.
This will add support for other manner:
stable - default mode taken from IEEE802.11AX this is default
aggregator mode
bandwidth - takes aggregator with highest bandwidth
count - takes aggregator with biggest number of slaves
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
i40e VF close would stop the VF first, if VF already stopped this
result duplicate add/del MAC address which cause failure in executing
admin command.
Fix this by adding VF stop status check and sync up VF MAC address count
during add/del.
Fixes: d42aaf3000 ("i40e: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
x550 devices don't map interrupt vector before enabling Rx/Tx queue
interrupt.
Because of this interrupt mode is not working for x550 devices.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add queue index check when create filter rule, or
filter with invalid queue id can be created successfully.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Listen to INTR_RMV events issued by slaves.
Add atomic flags on slave queues to detect use of slave bursts function.
If a removal is detected, set the recollection flag on this slave.
During a slave upkeep round, if its recollection flag is set and its
burst functions are not in use by any thread, remove that slave.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the "exec" device type.
The parameters given to this type of device will be executed in a shell.
The output of this command is then used as a definition for a device.
That command can be re-interpreted if the related device is not
plugged-in. It allows for a device definition to react to system
changes (e.g. changing PCI bus for a given device).
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Periodically check for the existence of a device.
If a device has not been initialized and exists on the system, then it
is probed and configured.
The configuration process strives to synchronize the states between the
plugged-in sub-device and the fail-safe device.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
The x550 family does not support ipv6-other flow as well as
ipv4-other flow, so add this limitation.
Fixes: 7d629caced ("net/ixgbe: enable IPv6 for consistent API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
82599ES can support SCTP packet drop action, but the
configuration is different from TCP or UDP packet, so
it need to rework some FDIR related code to adapt
drop action rule of SCTP packet.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Previously SW workaround for GL_SWR_PRI_JOIN_MAP is added for X710
performance. As new FW version 6.0 supports ADQ,
value for GL_SWR_PRI_JOIN_MAP should be changed, otherwise
ehtertype filter will be impacted.
Fixes: 973273c7a4 ("i40e: workaround for X710 performance")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Remove checks of Linux kernel version
in order to support kernel with backported features.
the expected behavior with a kernel that doesn't support flower
and other bits is the following:
-flow validate can return successfully
-flow create using the same rule fails.
Using the "remote" feature without kernel flower does not fail silently.
The TAP instance is not initialized if the requested parameters cannot
be satisfied.
it has been tested on an old kernel without required support:
PMD: Kernel refused TC filter rule creation (2): No such file or directory
PMD: tap0 failed to create implicit rules.
PMD: Can't set up remote feature: No such file of directory(2)
PMD: TAP Unable to initialize net_tap0
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Drop action is not supported by signature match, should return
error when try to create a signature match flow with drop action.
Fixes: a948d33bc0 ("net/ixgbe: enable signature match for consistent API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
PF driver and VF driver communicated with each other by virtual
channel message. When VF sends message to PF to enable some
offload capability, PF should response if it is successful or not.
VIRTCHNL_OP_ENABLE_VLAN_STRIPPING is a new added message and the
old PF driver doesn’t support that. So no response is received by
DPDK VF. Then VF is blocked on this message and cannot roll back.
This patch clears pending command on VF side when the waiting duration
expires to avoid blocking following communication.
Fixes: 5f0b95d59a ("net/i40e: support VLAN stripping for VF")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
