Move related specific testpmd commands into this driver directory.
While at it, fix checkpatch warnings.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Move related specific testpmd commands into this driver directory.
While at it, fix checkpatch warnings.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Currently, some eth devices are added to bond device, these devices are
not released when the quit command is executed in testpmd. This patch
adds the release operation for all active slaves under a bond device.
Fixes: 0e545d3047 ("app/testpmd: check stopping port is not in bonding")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
This patch adds help messages for multi-process.
--num-procs=N: set the total number of multi-process instances.
--proc-id=id: set the id of the current process from multi-process
instances(0 <= id < num-procs).
Fixes: a550baf24a ("app/testpmd: support multi-process")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
The "test_rss_lazy" test is used for testing bonding RSS functions
when bonded port disable RSS. Currently, this test case can update
RSS functions of bonded and slave port if bonded port turns off RSS.
It is unreasonable and has been adjusted to be non-updateable in
following patch:
"93e1ea6dfa99 ethdev: fix RSS update when RSS is disabled"
So this patch fixes this test code.
Fixes: 43b630244e ("app/test: add dynamic bonding RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Increase number of cryptodev queue pair descriptors by default. Current
size of 128 descriptors does not satisfying minimal requirements of crypto
drivers.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Crypto operation allocation may fail in case when total size of queue
pairs are bigger than the pool size.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Destroying cryptodev resources before exiting workers are not safe.
Moved cryptodev destroy after worker thread exit in main thread.
Fixes: de2bc16e1b ("app/eventdev: add crypto producer mode")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add Tx first support to pipeline mode tests, the transmission is done
on all the ethernet ports. This helps in testing eventdev performance
with standalone loopback interfaces.
Example:
./dpdk-test-eventdev ... -- ... --tx_first 512
512 defines the number of packets to transmit.
Add an option Tx packet size, the default packet size is 64.
Following example can change packet size value as 320.
Example:
./dpdk-test-eventdev ... -- ... --tx_first 512 --tx_pkt_sz 320
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use mempool cache for vector mempool as vectors are freed by the Tx
routine, also increase the minimum pool size to 512 to avoid resource
contention on Rx.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch initializes with 0 rte_ipsec_sa_prm inside the
ipsec_sa struct.
Before it was passed uninitialized to rte_ipsec_sa_init(),
which does not check whether prm->ipsec_xform.esn.value is
greater than sa->sqn_mask.
Bugzilla ID: 1023
Fixes: f7f3ac6dcb ("test/ipsec: add performance cases")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
The cipher offset in bits was not being used in ZUC encryption test
functions when creating the operation, it was hardcoded to 0.
This is fixed to use the offset from the test vector as intended.
Fixes: fd01a9be38 ("test/crypto: move IV to crypto op private data")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
This patch updates asymmetric DSA routine in crypto openssl pmd
to adopt openssl 3.0 EVP apis. Divided the single combined DSA sign
test to two individual DSA sign and DSA verfiy tests.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Make sure that ipsec_perf_autotest checks if there are any crypto
devices available before it starts performance testing.
Same test is performed in the ipsec_autotest so it seems prudent to do
it here too to not introduce false failures.
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
GCC 12 raises the following warning:
In function ‘_mm256_loadu_si256’,
inlined from ‘rte_mov32’ at
../lib/eal/x86/include/rte_memcpy.h:319:9,
inlined from ‘rte_mov128’ at
../lib/eal/x86/include/rte_memcpy.h:344:2,
inlined from ‘rte_memcpy_generic’ at
../lib/eal/x86/include/rte_memcpy.h:438:4,
inlined from ‘rte_memcpy’ at
../lib/eal/x86/include/rte_memcpy.h:882:10,
inlined from ‘setup_test_string.constprop’ at
../app/test/test_ipsec.c:572:4:
/usr/lib/gcc/x86_64-redhat-linux/12/include/avxintrin.h:929:10: error:
array subscript ‘__m256i_u[3]’ is partly outside array bounds of
‘const char[108]’ [-Werror=array-bounds]
929 | return *__P;
| ^~~~
../app/test/test_ipsec.c: In function ‘setup_test_string.constprop’:
../app/test/test_ipsec.c:539:12: note: at offset 96 into object
‘null_plain_data’ of size 108
539 | const char null_plain_data[] =
| ^~~~~~~~~~~~~~~
Add a hint so that the compiler understands the copied data is within
the passed string boundaries.
Bugzilla ID: 848
Fixes: 05fe65eb66 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Fail IPSec ESN and antireplay cases, if there are no packets. Fixes
following warning when using optimization=1 build flag with GCC 11.
../app/test/test_cryptodev.c: In function ‘test_ipsec_pkt_replay’:
../app/test/test_cryptodev.c:10074:15: warning: ‘td_outb’ may be used uninitialized [-Wmaybe-uninitialized]
ret = test_ipsec_proto_process(td_outb, td_inb, nb_pkts, true,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
&flags);
~~~~~~~
../app/test/test_cryptodev.c:9150:1: note: by argument 1 of type ‘const struct ipsec_test_data[]’ to ‘test_ipsec_proto_process’ declared here
test_ipsec_proto_process(const struct ipsec_test_data td[],
^~~~~~~~~~~~~~~~~~~~~~~~
../app/test/test_cryptodev.c:10056:32: note: ‘td_outb’ declared here
struct ipsec_test_data td_outb[IPSEC_TEST_PACKETS_MAX];
^~~~~~~
Bugzilla ID: 1032
Fixes: d02c6bfcb9 ("test/crypto: add ESN and antireplay cases")
Cc: stable@dpdk.org
Reported-by: Daxue Gao <daxuex.gao@intel.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Adding companion function common to ACC100/ACC101 which
can be called from bbdev-test when running from PF.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The PIE code and other applications can benefit from having a
fast way to get a random floating point value. This new function
is equivalent to drand() in the standard library.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
cycles_autotest and delay_us_sleep_autotest tests were removed in the
commit ee00af6017 ("test: remove strict timing requirements some tests")
and were wrongly reintroduced later.
Bugzilla ID: 1021
Fixes: 74822233bd ("test: create a list of extra tests")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Enable most of the driver tests to run on Windows, most tests will be
skipped since the drivers themselves are not available on Windows.
Tests not removed from conditional run:
cryptodev_openssl_asym_autotest
Test fails because it does not bother checking to see if required
driver is available as the other cryptodev tests do.
The test should be updated to fix the issue.
eventdev_selftest_octeontx, eventdev_selftest_sw
Because it has a dependency on eventdev library which doesn't build
on Windows. These should be resolved by including/running the tests
dependent on if dpdk_conf.has('RTE_LIB_EVENT')
dump_xxx tests are still to be evaluated, no attempt has been made
to move these out of conditional run for Windows.
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Currently trace_autotest unit test is executed with traces disabled.
This patch introduces trace_autotest unit test with traces enabled,
and the traces file is written to the directory where dpdk-test is
located.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Some DMA PMD may not update last-idx when no DMA completed, the
previous patch [1] cannot detect this problem actually.
This patch resets last-idx before invoking DMA completed ops to fix it.
[1] test/dma: check index when no DMA completed
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
GCC 12 raises the following warning:
../app/test-flow-perf/main.c: In function ‘start_forwarding’:
../app/test-flow-perf/main.c:1737:28: error: ‘sprintf’ may write a
terminating nul past the end of the destination
[-Werror=format-overflow=]
1737 | sprintf(p[i++], "%d", (int)n);
| ^
In function ‘pretty_number’,
inlined from ‘packet_per_second_stats’ at
../app/test-flow-perf/main.c:1792:4,
inlined from ‘start_forwarding’ at
../app/test-flow-perf/main.c:1831:3:
[...]
We can simplify this code and rely on libc integer formatting via
this system locales.
Bugzilla ID: 856
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When passing in test names to run via either the DPDK_TEST environment
variable or via extra argv parameters, the checks run on those commands
can miss valid commands that are registered with the cmdline library in
the initial context used to set it up. This is seen in the fact that the
"dump_*" set of commands are not callable via argv parameters, but can
be called manually.
To fix this, just use the commandline library to validate each command
before executing it, stopping execution when an error is encountered.
This also has the benefit of not having the test binary drop to
interactive mode if all commandline parameters given are invalid.
Bugzilla ID: 1002
Fixes: 9b848774a5 ("test: use env variable to run tests")
Fixes: ace2f054ed ("test: take test names from command line")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
A new event RTE_ETH_EVENT_RX_AVAIL_THRESH should be generated by HW
when number of available descriptors in Rx queue goes below the
threshold.
The threshold is defined as a percentage of an Rx queue size with valid
values from 0 to 99 (inclusive). Zero (default) value disables it.
There is no capability reporting for the feature. Application should
simply try to set required threshold value and handle result.
Add testpmd commands to control the threshold:
set port <port_id> rxq <rxq_id> avail_thresh <avail_thresh_num>
Signed-off-by: Spike Du <spiked@nvidia.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A multicast address pool is allocated for a port when
using mcast_addr testpmd commands.
When closing a port or stopping testpmd, this pool was
not freed, resulting in a leak.
This issue has been caught using ASan.
Free this pool when closing the port.
Error info as following:
ERROR: LeakSanitizer: detected memory leaksDirect leak of
192 byte(s)
0 0x7f6a2e0aeffe in __interceptor_realloc
(/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
1 0x565361eb340f in mcast_addr_pool_extend
../app/test-pmd/config.c:5162
2 0x565361eb3556 in mcast_addr_pool_append
../app/test-pmd/config.c:5180
3 0x565361eb3aae in mcast_addr_add
../app/test-pmd/config.c:5243
Fixes: 8fff667578 ("app/testpmd: new command to add/remove multicast MAC addresses")
Cc: stable@dpdk.org
Signed-off-by: Ke Zhang <ke1x.zhang@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
When --mbuf-size cmdline parameter is specified, the segments to scatter
packets on are allocated sequentially from these extra memory pools
(the mbuf for the first segment is allocated from the first pool, the
second one from the second pool, and so on, if segment number is greater
then pool’s the mbuf for remaining segments will be allocated from the
last valid pool).
A bug in comparing segment index with mbuf index caused wrong mapping
of one of the segments.
Fix the comparison.
Fixes: 2befc67ff6 ("app/testpmd: add extended Rx queue setup")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add checks for all flag values defined in the RISC-V misa CSR register.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Michal Mazurek <maz@semihalf.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Add all necessary elements for DPDK to compile and run EAL on SiFive
Freedom U740 SoC which is based on SiFive U74-MC (ISA: rv64imafdc)
core complex.
This includes:
- EAL library implementation for rv64imafdc ISA.
- meson build structure for 'riscv' architecture. RTE_ARCH_RISCV define
is added for architecture identification.
- xmm_t structure operation stubs as there is no vector support in the
U74 core.
Compilation was tested on Ubuntu and Arch Linux using riscv64 toolchain.
Clang compilation currently not supported due to issues with missing
relocation relaxation.
Two rte_rdtsc() schemes are provided: stable low-resolution using rdtime
(default) and unstable high-resolution using rdcycle. User can override
the scheme by defining RTE_RISCV_RDTSC_USE_HPM=1 during compile time of
both DPDK and the application. The reasoning for this is as follows.
The RISC-V ISA mandates that clock read by rdtime has to be of constant
period and synchronized between all hardware threads within 1 tick
(chapter 10.1 in version 20191213 of RISC-V spec).
However this clock may not be of high-enough frequency for dataplane
uses. I.e. on HiFive Unmatched (FU740) it is 1MHz.
There is a high-resolution alternative in form of rdcycle which is
clocked at the core clock frequency. The drawbacks are that it may be
disabled during sleep (WFI), its frequency might change due to DVFS and
it is core-local and therefore cannot be used as a wall-clock. It can
however be used for micro-benchmarking user applications, similarly to
Aarch64's PMCCNTR PMU counter.
The platform is currently marked as linux-only because rte_cycles
implementation uses the timebase-frequency device-tree node read through
the proc file system. Such approach was chosen because Linux kernel
depends on the presence of this device-tree node.
The i40e PMD driver is disabled on RISC-V as the rv64gc ISA has no vector
operations.
The compilation of following modules has been disabled by this commit
and will be re-enabled in later commits as fixes are introduced:
net/ixgbe, net/memif, net/tap, example/l3fwd.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Michal Mazurek <maz@semihalf.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
If the setup function returns TEST_SKIPPED, the logs would say the test
case is skipped while the summary count would consider it under failed
cases. Address this by counting such test cases under 'skipped'.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch replaces instances of zero-sized arrays i.e. those at the end
of structures with "[0]" with the more standard syntax of "[]".
Replacement was done using coccinelle script, with some revert and
cleanup of whitespace afterwards.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A sequence lock (seqlock) is a synchronization primitive which allows
for data-race free, low-overhead, high-frequency reads, suitable for
data structures shared across many cores and which are updated
relatively infrequently.
A seqlock permits multiple parallel readers. A spinlock is used to
serialize writers. In cases where there is only a single writer, or
writer-writer synchronization is done by some external means, the
"raw" sequence counter type (and accompanying rte_seqcount_*()
functions) may be used instead.
To avoid resource reclamation and other issues, the data protected by
a seqlock is best off being self-contained (i.e., no pointers [except
to constant data]).
One way to think about seqlocks is that they provide means to perform
atomic operations on data objects larger than what the native atomic
machine instructions allow for.
DPDK seqlocks (and the underlying sequence counters) are not
preemption safe on the writer side. A thread preemption affects
performance, not correctness.
A seqlock contains a sequence number, which can be thought of as the
generation of the data it protects.
A reader will
1. Load the sequence number (sn).
2. Load, in arbitrary order, the seqlock-protected data.
3. Load the sn again.
4. Check if the first and second sn are equal, and even numbered.
If they are not, discard the loaded data, and restart from 1.
The first three steps need to be ordered using suitable memory fences.
A writer will
1. Take the spinlock, to serialize writer access.
2. Load the sn.
3. Store the original sn + 1 as the new sn.
4. Perform load and stores to the seqlock-protected data.
5. Store the original sn + 2 as the new sn.
6. Release the spinlock.
Proper memory fencing is required to make sure the first sn store, the
data stores, and the second sn store appear to the reader in the
mentioned order.
The sn loads and stores must be atomic, but the data loads and stores
need not be.
The original seqlock design and implementation was done by Stephen
Hemminger. This is an independent implementation, using C11 atomics.
For more information on seqlocks, see
https://en.wikipedia.org/wiki/Seqlock
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
If no DMA request is completed, the ring_idx of the last completed
operation need returned by last_idx parameter. This patch adds
testcase for it.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Tested-by: Kevin Laatz <kevin.laatz@intel.com>
This patch introduces the IPv4/IPv6 ECN modify field support, and
adds the testpmd CLI commands support.
Usage:
modify_field op set dst_type ipv4_ecn src_type ...
For example:
flow create 0 ingress group 1 pattern eth / ipv4 / end actions
modify_field op set dst_type ipv4_ecn src_type value src_value
0x03 width 2 / queue index 0 / end
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Introduce a testpmd API so that drivers can register specific commands.
A driver can list some files to compile with testpmd, by setting them
in the testpmd_sources (driver local) meson variable.
drivers/meson.build then takes care of appending this to a global meson
variable, and adding the driver to testpmd dependency.
Note: testpmd.h is fixed to that it is self sufficient when being
included.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
All those symbols don't need to be global, plus it was hiding unused
code such as:
- cmd_set_conntrack_dir_set and cmd_set_conntrack_dir_conntrack in
cmdline.c,
- cmd_create_port_meter_g_action, cmd_create_port_meter_r_action,
cmd_create_port_meter_y_action in cmdline_mtr.c,
Mark those symbols as static.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
The help message of create meter command is incomplete,
lack of policy_id param, update help string.
Fixes: f29fa2c59b ("app/testpmd: support policy actions per color")
Cc: stable@dpdk.org
Signed-off-by: Jin Liu <jin.liu@corigine.com>
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Calling Rx/Tx functions on a stopped queue is not supported.
Do not run packet forwarding for streams that use stopped queues.
Each stream has a read-only "disabled" field,
so that lcore function can skip such streams.
Forwarding engines can set this field
using a new "stream_init" callback function
by checking relevant queue states,
which are stored along with queue configurations
(not all PMDs implement rte_eth_rx/tx_queue_info_get()
to query the state from there).
Fixes: 5f4ec54f1d ("testpmd: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When a port was closed, indirect actions could remain
with their handles no longer valid.
If a newly attached device was assigned the same ID as the closed port,
those indirect actions became accessible again.
Any attempt to use them resulted in an undefined behavior.
Automatically flush indirect actions when a port is closed.
Fixes: 4b61b8774b ("ethdev: introduce indirect flow action")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Add macro MIN_TOTAL_NUM_MBUFS (1024) to indicate
what the value of total-num-mbufs should bigger than.
Fixes: c87988187f ("app/testpmd: add --total-num-mbufs option")
Cc: stable@dpdk.org
Signed-off-by: Mingxia Liu <mingxia.liu@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Parameters to this static helper can't be NULL.
str has already been dereferenced in caller.
dst and size point to variable in stack.
Fixes: 169a9fed1f ("app/testpmd: fix hex string parser support for flow API")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
The GRO/GSO library doesn't re-calculate checksums for
merged/fragmented packets. If users want the packets to
have correct IP checksums, they should select HW IP
checksum calculation for the port which the packets are
transmitted to. But if the port doesn't support HW IP
checksum, users may perform a SW IP checksum.
Fixes: b7091f1dcf ("app/testpmd: enable the heavyweight mode TCP/IPv4 GRO")
Fixes: 52f38a2055 ("app/testpmd: enable TCP/IPv4 VxLAN and GRE GSO")
Cc: stable@dpdk.org
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Starting or stopping a bonded port also starts or stops all active slaves
under the bonded port. If this port is a bonded device, we need to modify
the port status of all slaves.
Fixes: 0e545d3047 ("app/testpmd: check stopping port is not in bonding")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
- move RSA padding into separate struct.
More padding members should be added into padding,
therefore having separate struct for padding parameters will
make this more readable.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
- Moved DH operation type to DH operation struct.
Operation type (PUBLIC_KEY_GENERATION, SHARED_SECRET) should
be free to choose for any operation. One xform/session should
be enough to perform both DH operations, if op_type would be xform
member, session would have to be created twice for the same
group. Similar problem would be observed in sessionless case.
Additionally, it will help extend DH to support Elliptic Curves.
- Changed order of Diffie-Hellman operation phases.
Now it corresponds with the order of operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
- Separated key exchange enum from asym op type.
Key exchange and asymmetric crypto operations like signatures,
encryption/decryption should not share same operation enum as
its use cases are unrelated and mutually exclusive.
Therefore op_type was separate into:
1) operation type
2) key exchange operation type
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
