PF multiport support has some limitations like not allowing plugging or
unplugging of single ports as they all belong to same PCI device.
A previous patch for removing detachable flag introduced a wrong check.
Fixes: 00a3d8104a ("ethdev: remove detachable device flag")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When adding count action to a drop flow rule while the device was not
started, the counter was not saved in the flow.
Fixes: 9a761de8ea ("net/mlx5: flow counter support")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Flow director API does not provide a layer 2 configuration when the
filter is for layer 3 and 4 causing the translation to generic flow API
to be wrong, as not providing a mask for layer ends by using the
default one.
In this case, the Ethernet mask layer is full whereas it must be empty.
Fixes: 4c3e9bcdd5 ("net/mlx5: support flow director")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In some cases when a VF driver is unloaded after the PF driver,
certain HWRM commands are returned with an error.
Instead the PF can tell the FW to permit these commands in order
to allow a clean unload.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Set the filter_type before we match a new filter against existing
filters. Otherwise we are missing the existing filters.
Fixes: 2d64da097a ("net/bnxt: support FDIR")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are wrongly "OR-ing" the vnic->hash_type instead of assigning
the new hash type thereby wrongly configuring hash settings.
Fixing it.
Fixes: fcc0aa1edc ("net/bnxt: add RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The flow engine in mlx5 searches for the most specific layer in the
pattern in order to set the flow rule priority properly.
Since the RSS can be currently performed only for the outer headers, avoid
updating the layer for the inner headers.
Fixes: 8086cf08b2 ("net/mlx5: handle RSS hash configuration in RSS flow")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
On SUSE11 with gcc 4.5.1 the following build error occurred,
most likely because of improper handling of annonymous unions:
drivers/net/ixgbe/ixgbe_ipsec.c:579:4: error:
unknown field ‘ipsec’ specified in initializer
Fixes: 9a0752f498 ("net/ixgbe: enable inline IPsec")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
If multiple queue pairs are created but all are not used, the
device is never started, as unused queues aren't enabled and
their ring addresses aren't translated. The device is changed
to running state when all rings addresses are translated.
This patch fixes this by postponning rings addresses translation
at kick time unconditionnaly, VHOST_USER_F_PROTOCOL_FEATURES
being negotiated or not.
Reported-by: Lei Yao <lei.a.yao@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Unsuccesfull memory allocation for elements inside cfgfile
structure could result in resource leak.
Fixed by pointer verification after each malloc,
if malloc fail - error branch is proceeded with freeing memory.
Coverity issue: 195032
Fixes: d4cb819758 ("cfgfile: support runtime modification")
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Function memchr() could return NULL and assign it to split[1] pointer.
Additional check and error handing is made after memchr() call.
Coverity issue: 195004
Fixes: a6a47ac9c2 ("cfgfile: rework load function")
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
This commit fixes a possible race condition if an application
uses the service-cores infrastructure and the function to run
a service on an application lcore at the same time.
The fix is to change the num_mapped_cores variable to be an
atomic variable. This causes concurrent accesses by multiple
threads to a service using rte_service_run_iter_on_app_lcore()
to detect if another core is currently mapped to the service,
and refuses to run if it is not multi-thread safe.
The run iteration on app lcore function has two arguments, the
service id to run, and if atomics should be used to serialize access
to multi-thread unsafe services. This allows applications to choose
if they wish to use use the service-cores feature, or if they
take responsibility themselves for serializing invoking a service.
See doxygen documentation for more details.
Two unit tests were added to verify the behaviour of the
function to run a service on an application core, testing both
a multi-thread safe service, and a multi-thread unsafe service.
The doxygen API documentation for the function has been updated
to reflect the current and correct behaviour.
Fixes: e9139a32f6 ("service: add function to run on app lcore")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The check for the existence of the default plugin directory calls stat
using an incorrect variable, which will cause a NULL pointer dereference
error.
Coverity issue: 198440
Fixes: d6a4399cdf ("eal: avoid error for non-existent default PMD path")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
For virtual device, the rte_intr_handle struct is
initialized by the virtual device driver, including
the event fd assignment. If the event fd need to be
read for clean, an argument is required for the proper
event fd read.
This patch adds efd_counter_size in rte_intr_handle
struct to tell the rx interrupt process the read size.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Revert the patchset run-time Linking support including the following
3 commits:
Fixes: 84cc318424 ("eal/x86: select optimized memcpy at run-time")
Fixes: c7fbc80fe6 ("test: select memcpy alignment unit at run-time")
Fixes: 5f180ae329 ("efd: move AVX2 lookup in its own compilation unit")
The patchset would cause perf drop in vhost/virtio loopback performance
test. Because the run-time dispatch must cost at least a function call
comparing to the compile-time dispatch. And the reference cpu cycles value
is small. And in the test, when using 128-256 bytes packet, it would cause
16%-20% perf drop with mergeble path. When using 256 bytes packet, it would
cause 13% perf drop with vector path.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Some devices are having problem on device reset that happens during DPDK
application exit [1].
Create a static list of devices and exclude them from device reset.
[1]
http://dpdk.org/ml/archives/dev/2017-November/080927.html
Fixes: b58eedfc7d ("igb_uio: issue FLR during open and release of device file")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function pci_get_sysfs_path was moved from EAL to the PCI driver.
The namespace is now fixed by adding "rte_" prefix.
The map files are fixed by removing the symbol from EAL and adding
it to the PCI driver.
It is an API break but it is probably not used by applications.
Anyway this API is already broken by the move in a new header file.
Fixes: c752998b5e ("pci: introduce library and driver")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
PPC64 sPAPR iommu does not support iova as va.
Use pa mode instead.
Fixes: 815c7deaed ("pci: get IOMMU class on Linux")
Signed-off-by: Jonas Pfefferle <jpf@zurich.ibm.com>
Fix kernel crash with KNI because KNI requires physical addresses.
When IOVA VA mode used, memzones and mbufs physical address fields
contain virtual addresses. But KNI relies on these fields to enable
kernel access for buffers. Those fields having virtual address cause
crash in kernel.
This is a workaround until KNI fixed properly to work with virtual
addresses.
Fixes: 72d013644b ("mem: honor IOVA mode in malloc virt2phy")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Before this commit, the EXPERIMENTAL version of ABI
derived from the DPDK_17.08 tag. In parallel there
was a DPDK_17.11 tag.
Experimental map should always derive from the latest ABI,
so this patch moves the 17.11 section above EXPERIMENTAL,
and updates EXPERIMENTAL to derive from the 17.11 map.
Fixes: aadc3eb002 ("pci: export match function")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
API and ABI of mempool library has been changed in 17.11.
Fixes: 02604520b2 ("mempool: remove unused flags argument")
Fixes: 0cc0f8aaa3 ("mempool: change flags from int to unsigned int")
Fixes: 6eac187bff ("mempool: add flags arg in xmem size and usage")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The wording changes have been done in the API without breaking
the ABI. The deprecated fields and symbols can be removed later
when an another ABI change will be required.
The deprecation notice can be removed.
The release notes describe the new available API with IOVA wording.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The functions rte_mempool_populate_phys() and
rte_mempool_populate_phys_tab() are renamed to
rte_mempool_populate_iova() and rte_mempool_populate_iova_tab().
The deprecated functions are kept as aliases to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct fields phys_addr_t rte_mempool_objhdr.physaddr and
rte_mempool_memhdr.phys_addr are renamed to rte_iova_t iova.
The deprecated names are kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The function rte_malloc_virt2phy() is renamed to rte_malloc_virt2iova().
The deprecated name is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The function rte_mem_virt2phy() is kept and used in functions which
works only with physical addresses.
For all other calls this function is replaced by rte_mem_virt2iova()
which does a direct mapping (no conversion) in the VA case.
Note: the new function rte_mem_virt2iova() function matches the
behaviour implemented in rte_mem_virt2phy() by the commit
680f6c1260 ("mem: honor IOVA mode in virt2phy")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Renaming rte_memseg {.phys_addr} to {.iova}
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Use rte_iova_t and RTE_BAD_IOVA where appropriate in
memory segment handling.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The IO virtual addresses may be used instead of physical addresses.
As IOVA is more generic, it should be used in most places instead
of physical address wording.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
If the IOVA mode is not using physical addresses,
no need to log an error about physical address issue.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The function rte_mem_phy2mch() was removed with the support
of Xen dom0.
Fixes: a7cb2e20d2 ("mem: remove API to get physical address in dom0")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The file rte_config.h is generated and automatically included
with -include option.
The explicit includes in drivers and libraries are useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
It is easier to find all constructor functions when they use
the same macros RTE_INIT or RTE_INIT_PRIO.
The macro definitions are moved from rte_eal.h to rte_common.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When moving the library dependencies handling from top Makefiles
to library Makefiles, the list core-libs became useless.
Fixes: cbc12b0a96 ("mk: do not generate LDLIBS from directory dependencies")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There are random build errors in test reports [1]. Build error
is not directly related to DPDK but observed during DPDK build.
When I get similar unexpected build errors in my system, found
out that /dev/null is invalid.
It seems ICC overwrites the /dev/null with "icc -o /dev/null" instead
of sending output to /dev/null. This is not always reproducible, so
hard to say what exactly is triggering the error.
I suspect test-report build errors can be because of the same reason,
and it is good to add a protection for this case.
Instead of sending output to /dev/null save it to the tmp folder and
remove it back when done.
[1]
http://dpdk.org/ml/archives/test-report/2017-November/034053.html
Failure #3
/usr/src/linux-headers-4.4.0-97-generic/include/linux/sysfs.h:517:37:
error: pointer targets in passing argument 2 of ‘kernfs_find_and_get’
differ in signedness [-Werror=pointer-sign]
return kernfs_find_and_get(parent, name);
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some symbols were introduced with the wrong prefix.
Add the usual "rte_" prefix when needed.
Fixes: c752998b5e ("pci: introduce library and driver")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Exposed VFIO functions simply uses a "vfio" prefix.
Use the proper "rte_vfio" prefix for those symbols.
Fixes: 279b581c89 ("vfio: expose functions")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
If the device is not capable of resetting, then Linux kernel updates
the errno as EINVAL.
http://elixir.free-electrons.com/linux/v4.9/source/drivers/vfio/pci/vfio_pci.c#L887
Honor the EINVAL errno value to avoid pci vfio setup failure.
Fixes: f25f8f3676 ("bus/pci: check VFIO reset ioctl error")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Jonas Pfefferle <jpf@zurich.ibm.com>
