This commit removes the experimental tags from the
service cores functions, they now become part of the
main DPDK API/ABI.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The previous symbols were deprecated for two releases.
They are now marked as such and cannot be used anymore.
They are replaced by ones respecting the new namespace that are marked
experimental.
As a result, eth_dev attach and detach are slightly reworked to follow
the changes.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
A new API was introduced to create control thread:
rte_ctrl_thread_create(). Use it in examples when relevant.
While at it, change the prototype of the thread start functions: it's
not a good idea to cast it in (void *) since the compiler won't check
that the prototype is compatible.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Only a cosmetic change: the *_LEN defines are already used
when defining the buffer. Using sizeof() ensures that the length
stays consistent, even if the definition is modified.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
For inline protocol processing, the PMD/device is required to maintain
the ESN. But the application is required to monitor ESN overflow to
initiate SA expiry.
For such cases, application would set the ESN soft limit. An IPsec event
would be raised by rte_eth_event framework, when ESN hits the soft limit
set by the application.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The usage print was not updated when jumbo frames & crypto_dev mask
support was added. Fixing that. Also, the optional arguments were not
properly highlighted in the usage header. This is also fixed.
General cleanup of the usage print was also done to make it look more
cleaner and similar to what is existing in other applications like
l3fwd.
Fixes: bbabfe6e4e ("examples/ipsec_secgw: support jumbo frames")
Fixes: 2c68fe7915 ("examples/ipsec-secgw: add cryptodev mask option")
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
The code is incorrectly updating the authxform instead of
aead xforms.
Fixes: b79e4c00af ("cryptodev: use AES-GCM/CCM as AEAD algorithms")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removing redundant strncmp in parsing long arguments. The getopt library
provides means to identify long options using the "val" field of
structure option. The existing code gets 0 as "val" for all long
arguments and then uses strncmp to figure out which long option was
being referred to. Fixing this.
In addition, the macros and enums used for long arguments have been
renamed and repositioned adhering to the general convention followed in
various other apps, like l3fwd.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
This patch uses the new rte_vhost_va_from_guest_pa() API
to ensure all the descriptor buffer is mapped contiguously
in the application virtual address space.
As the application did not checked return of previous API,
this patch just print an error if the buffer address isn't in
the vhost memory regions or if it is scattered. Ideally, it
should handle scattered buffers gracefully.
This issue has been assigned CVE-2018-1059.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch uses the new rte_vhost_va_from_guest_pa() API
to ensure the application doesn't perform out-of-bound
accesses either because of a malicious guest providing an
incorrect descriptor length, or because the buffer is
contiguous in guest physical address space but not in the
host process virtual address space.
This issue has been assigned CVE-2018-1059.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When a required library is missing on a platform, rather than having
meson report an error about the missing variable, catch the problem
earlier and provide a more readable message.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
To test building all relevant example applications as part of a build, we
add support for the "all" keyword to be passed to the "examples" build
option. Since not all examples can actually be built on all systems,
we also add support for the "build" option inside the sub-dirs. However,
in case where "all" is not used, and a particular example is requested
to be built, we will error out if building the requested app is not
possible.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
When building with meson, set build to false when building unsupported
example apps on FreeBSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
The l2fwd-cat example uses the pqos library to work, so make the meson
build dependent on the presence of that library
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
A number of example apps are not supported by the meson build system yet,
but to allow future testing with "-Dexamples=all" we add in a placeholder
meson.build file indicating that the apps should not be built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds vhost_crypto sample application to DPDK.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
IP_Pipeline app is not supported in FreeBSD environment. Therefore,
skip it while building the sample apps on FreeBSD.
Fixes: 4bbf8e30aa ("examples/ip_pipeline: add CLI interface")
Fixes: 2f74ae28e2 ("examples/ip_pipeline: add tap object")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add example to build pipeline with hash table to classify the
ingress traffic.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Add example to built pipeline with ACL table to demonstrate
the firewall operation.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add example to built pipeline with LPM table to demonstrate layer 3
routing.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Add example to illustrate the pipeline functioning with TAP
interface.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Add example to illustrate the pipeline functioning with KNI
interface.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
This patch add the configuration file for l2fwd example. It
includes commands to build the packet processing stage (pipeline),
defining action, add rules to its table, etc.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Add command to update the dscp table for traffic meter and traffic
manager.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add commands to add pipeline table entries which contains match and
action part.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Add commands to read the pipeline port in, port out
and table stats.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Add commands to enable and disable the pipeline on the thread.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Add threads data structure and initialisation functions to run
the pipeline.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add tap object implementation to the application
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Add link object implementation to the application.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
