remove the following API's:
rte_eth_dev_set_vf_rxmode
rte_eth_dev_set_vf_rx
rte_eth_dev_set_vf_tx
rte_eth_dev_set_vf_vlan_filter
rte_eth_dev_set_vf_rate_limit
Increment LIBABIVER in Makefile
Remove deprecation notice for removing rte_eth_dev_set_vf_* API's.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch adds a new API 'rte_eth_dev_fw_version_get' for
fetching firmware version by a given device.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
They are superseded by the generic flow API (rte_flow). Target release is
not defined yet.
Suggested-by: Kevin Traynor <ktraynor@redhat.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
This patch adds a notice that the ABI change for ethtool app to
get the NIC firmware version in the 17.02 release.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
In 17.02 five rte_eth_dev_set_vf_*** functions will be removed
from librte_ether, renamed and moved to the ixgbe PMD.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The _rte_eth_dev_call_process function will change to return "int"
and a fourth parameter "void* ret_param" will be added. This change
targets release 17.02.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In igb_uio, iomem is mapped, and both ioport and io mem are recorded
into uio framework (then into sysfs files), which is duplicated with
what Linux has already provided for user space, and makes the code
too complex.
For iomem, DPDK user space code never opens or reads files under
/sys/pci/bus/devices/xxxx:xx:xx.x/uio/uioY/maps/. Instead,
/sys/pci/bus/devices/xxxx:xx:xx.x/resourceY are used to map device
memory.
For ioport, non-x86 platforms cannot read from files under
/sys/pci/bus/devices/xxxx:xx:xx.x/uio/uioY/portio/ directly, because
non-x86 platforms need to map port region for access in user space,
see non-x86 version pci_uio_ioport_map(). x86 platforms can use the
the same way as uio_pci_generic.
This will remove iomem and ioport mapping in igb_uio kernel module,
and adjusts the iomem implementation in both igb_uio and
uio_pci_generic:
- for x86 platform, get ports info from /proc/ioports;
- for non-x86 platform, map and get ports info by pci_uio_ioport_map().
Note: this will affect those applications who are using files under
/sys/pci/bus/devices/xxxx:xx:xx.x/uio/uioY/maps/ and
/sys/pci/bus/devices/xxxx:xx:xx.x/uio/uioY/portio/.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The changes for the feature "Tx prepare" should be made in version 17.02.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The library was named libethdev without rte_ prefix.
It is now fixed, the library namespace is consistent.
Note: the ABI version has already been changed in this release cycle.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
rte_device/driver generalization patches [1] were merged without a change
in the LIBABIVER variable. This patches bumps the macro of affected libs:
- libcryptodev and libetherdev have been bumped
- librte_eal version changed in
d7e61ad3ae36 ("log: remove deprecated history dump")
Details of ABI/API changes:
- EAL [version already bumped in: d7e61ad3ae36]
|- type field was removed from rte_driver
|- rte_pci_device now embeds rte_device
|- rte_pci_resource renamed to rte_mem_resource
|- numa_node and devargs of rte_pci_driver is moved to rte_driver
|- APIs for device hotplug (attach/detach) moved into EAL
|- API rte_eal_pci_device_name added for PCI device naming
|- vdev registration API introduced (rte_eal_vdrv_register,
| rte_eal_vdrv_unregister
- librte_crypto (v 1=>2)
|- removed rte_cryptodev_create_unique_device_name API
|- moved device naming to EAL
- librte_ethdev (v 4=>5)
|- rte_eth_dev_type is removed
|- removed dev_type from rte_eth_dev_allocate API
|- removed API rte_eth_dev_get_device_type
|- removed API rte_eth_dev_get_addr_by_port
|- removed API rte_eth_dev_get_port_by_addr
|- removed rte_cryptodev_create_unique_device_name API
|- moved device naming to EAL
Also, deprecation notice from 16.07 has been removed and release notes for
16.11 added.
[1] http://dpdk.org/ml/archives/dev/2016-September/047087.html
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The ``file_name`` data type of ``struct rte_port_source_params`` and
``struct rte_port_sink_params`` is changed from `char *`` to ``const char *``.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
remove vhost-cuse code, including the eventfd_link kernel module that
is for vhost-cuse only.
The lib/virt/qemu-wrap.py is also removed, as it's mainly for vhost-cuse
usage.
As we have one vhost implementation now, one vhost config option is
needed only. Thus, CONFIG_RTE_LIBRTE_VHOST_USER is removed.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.
There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.
More cleanups can be done after this but will come in subsequent patchsets.
[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The log history feature was deprecated in 16.07.
The remaining empty functions are removed in 16.11.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
It was planned to remove some mempool functions which are deprecated
since 16.07.
As no other mempool ABI change is planned in 16.11, it is better
to postpone and group every mempool ABI changes in 17.02.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The API changes are planned for rte_port_source_params and
rte_port_sink_params, which will be supported from release 16.11.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Vhost-cuse was invented before vhost-user exist. The both are actually
doing the same thing: a vhost-net implementation in user space. But they
are not exactly the same thing.
Firstly, vhost-cuse is harder for use; no one seems to care it, either.
Furthermore, since v2.1, a large majority of development effort has gone
to vhost-user. For example, we extended the vhost-user spec to add the
multiple queue support. We also added the vhost-user live migration at
v16.04 and the latest one, vhost-user reconnect that allows vhost app
restart without restarting the guest. Both of them are very important
features for product usage and none of them works for vhost-cuse.
You now see that the difference between vhost-user and vhost-cuse is
big (and will be bigger and bigger as time moves forward), that you
should never use vhost-cuse, that we should drop it completely.
The remove would also result to a much cleaner code base, allowing us
to do all kinds of extending easier.
So here to mark vhost-cuse as deprecated in this release and will be
removed in the next release (v16.11).
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
There was a prior call with an explanation of what needs to be done:
http://dpdk.org/ml/archives/dev/2016-June/040844.html
- Qemu patch upstreamed
- IVSHMEM PCI device managed by a PCI driver
- No DPDK objects (ring/mempool) allocated by EAL
As nobody seems interested, it is time to remove this code which
makes EAL improvements harder.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
For 16.11, the mbuf structure will be modified implying ABI breakage.
Some discussions already took place here:
http://www.dpdk.org/dev/patchwork/patch/12878/
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: John Daley <johndale@cisco.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This is an ABI deprecation notice for DPDK 16.11 in librte_ether about
changes in rte_eth_dev and rte_eth_desc_lim structures.
As discussed in that thread:
http://dpdk.org/ml/archives/dev/2015-September/023603.html
Different NIC models depending on HW offload requested might impose
different requirements on packets to be TX-ed in terms of:
- Max number of fragments per packet allowed
- Max number of fragments per TSO segments
- The way pseudo-header checksum should be pre-calculated
- L3/L4 header fields filling
- etc.
MOTIVATION:
-----------
1) Some work cannot (and didn't should) be done in rte_eth_tx_burst.
However, this work is sometimes required, and now, it's an
application issue.
2) Different hardware may have different requirements for TX offloads,
other subset can be supported and so on.
3) Some parameters (eg. number of segments in ixgbe driver) may hung
device. These parameters may be vary for different devices.
For example i40e HW allows 8 fragments per packet, but that is after
TSO segmentation. While ixgbe has a 38-fragment pre-TSO limit.
4) Fields in packet may require different initialization (like eg. will
require pseudo-header checksum precalculation, sometimes in a
different way depending on packet type, and so on). Now application
needs to care about it.
5) Using additional API (rte_eth_tx_prep) before rte_eth_tx_burst let to
prepare packet burst in acceptable form for specific device.
6) Some additional checks may be done in debug mode keeping tx_burst
implementation clean.
PROPOSAL:
---------
To help user to deal with all these varieties we propose to:
1. Introduce rte_eth_tx_prep() function to do necessary preparations of
packet burst to be safely transmitted on device for desired HW
offloads (set/reset checksum field according to the hardware
requirements) and check HW constraints (number of segments per
packet, etc).
While the limitations and requirements may differ for devices, it
requires to extend rte_eth_dev structure with new function pointer
"tx_pkt_prep" which can be implemented in the driver to prepare and
verify packets, in devices specific way, before burst, what should to
prevent application to send malformed packets.
2. Also new fields will be introduced in rte_eth_desc_lim:
nb_seg_max and nb_mtu_seg_max, providing an information about max
segments in TSO and non-TSO packets acceptable by device.
This information is useful for application to not create/limit
malicious packet.
APPLICATION (CASE OF USE):
--------------------------
1) Application should to initialize burst of packets to send, set
required tx offload flags and required fields, like l2_len, l3_len,
l4_len, and tso_segsz
2) Application passes burst to the rte_eth_tx_prep to check conditions
required to send packets through the NIC.
3) The result of rte_eth_tx_prep can be used to send valid packets
and/or restore invalid if function fails.
eg.
for (i = 0; i < nb_pkts; i++) {
/* initialize or process packet */
bufs[i]->tso_segsz = 800;
bufs[i]->ol_flags = PKT_TX_TCP_SEG | PKT_TX_IPV4
| PKT_TX_IP_CKSUM;
bufs[i]->l2_len = sizeof(struct ether_hdr);
bufs[i]->l3_len = sizeof(struct ipv4_hdr);
bufs[i]->l4_len = sizeof(struct tcp_hdr);
}
/* Prepare burst of TX packets */
nb_prep = rte_eth_tx_prep(port, 0, bufs, nb_pkts);
if (nb_prep < nb_pkts) {
printf("tx_prep failed\n");
/* drop or restore invalid packets */
}
/* Send burst of TX packets */
nb_tx = rte_eth_tx_burst(port, 0, bufs, nb_prep);
/* Free any unsent packets. */
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The right name of ethdev should be dpdk_netdev. However:
1/ We are using rte_ prefix in the code and library names.
2/ The API uses rte_ethdev
That's why 16.11 will just have the rte_ prefix prepended to
the library filename as every other libraries.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Driver names for all the supported devices in DPDK do not have
a naming convention. Some are using a prefix, some are not
and some have long names. Driver names are used when creating
virtual devices, so it is useful to have consistency in the names.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove deprecation notice pertaining to introduction of new flow
types in favor of a more generic filtering infrastructure proposal.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
The mempool_count and mempool_free_count behaved contrary to what their
names suggested. The free_count function actually returned the number of
elements that were allocated from the pool, not the number unallocated as
the name implied.
Fix this by introducing two new functions to replace the old ones,
* rte_mempool_avail_count to replace rte_mempool_count
* rte_mempool_in_use_count to replace rte_mempool_free_count
In this patch, the new functions are added, and the old ones are marked
as deprecated. All apps and examples that use the old functions are
updated to use the new functions.
Fixes: af75078fece3 ("first public release")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The mempool cache is only available to EAL threads as a per-lcore
resource. Change this so that the user can create and provide their own
cache on mempool get and put operations. This works with non-EAL threads
too. This commit introduces the new API calls:
rte_mempool_cache_create(size, socket_id)
rte_mempool_cache_free(cache)
rte_mempool_cache_flush(cache, mp)
rte_mempool_default_cache(mp, lcore_id)
Changes the API calls:
rte_mempool_generic_put(mp, obj_table, n, cache, flags)
rte_mempool_generic_get(mp, obj_table, n, cache, flags)
The cache-oblivious API calls use the per-lcore default local cache.
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit introduces the API calls:
rte_mempool_generic_put(mp, obj_table, n, is_mp)
rte_mempool_generic_get(mp, obj_table, n, is_mc)
Deprecates the API calls:
rte_mempool_mp_put_bulk(mp, obj_table, n)
rte_mempool_sp_put_bulk(mp, obj_table, n)
rte_mempool_mp_put(mp, obj)
rte_mempool_sp_put(mp, obj)
rte_mempool_mc_get_bulk(mp, obj_table, n)
rte_mempool_sc_get_bulk(mp, obj_table, n)
rte_mempool_mc_get(mp, obj_p)
rte_mempool_sc_get(mp, obj_p)
We also check cookies in one place now.
Signed-off-by: Lazaros Koromilas <l@nofutznetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Until now, the objects stored in a mempool were internally stored in a
ring. This patch introduces the possibility to register external handlers
replacing the ring.
The default behavior remains unchanged, but calling the new function
rte_mempool_set_ops_byname() right after rte_mempool_create_empty() allows
the user to change the handler that will be used when populating
the mempool.
This patch also adds a set of default ops (function callbacks) based
on rte_ring.
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
With all the previous prepare works, we are just one step away from
the final ABI refactoring. That is, to change current API to let them
stick to vid instead of the old virtio_net dev.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch is used to add the class_id (class_code,
subclass_code, programming_interface) support for
pci_device probe. With this patch, it will be
flexible for users to probe a class of devices
by class_id.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The log history uses rte_mempool. In order to remove the mempool
dependency in EAL (and improve the build), this feature is deprecated.
The ABI is kept but the behaviour is now voided because it seems this
function was not used. The history can be read from syslog.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Remove the deprecation notice and add an entry in the release note
for the changes in mempool allocation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The rte_mempool structure is changed, which will cause an ABI change
for this structure. Providing backward compat is not reasonable
here as this structure is used in multiple defines/inlines.
Allow mempool cache support to be dynamic depending on if the
mempool being created needs cache support. Saves about 1.5M of
memory used by the rte_mempool structure.
Allocating small mempools which do not require cache can consume
larges amounts of memory if you have a number of these mempools.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542af4).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The driver i40e was using a specific PCI config before the release 16.04.
Since 16.04, it is always enabled in i40e (commit 56465cfaf).
The API has been deprecated in the commit 68f77593823cab.
The igb_uio implementation has been deprecated in commit b7cf8e155.
The config helper - through igb_uio sysfs entries - is now removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Support of PCAP file has been added to rte_port in release 16.04
as NEXT_ABI. It is in the standard ABI of the release 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Following discussions with Jan, here is a deprecation notice to prepare for
hotplug and rte_device changes to come in 16.07.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
We currently exposed way too many fields (or even structures) than
necessary. For example, vhost_virtqueue struct should NOT be exposed
to user at all: application just need to tell the right queue id to
locate a specific queue, and that's all. Instead, the structure should
be defined in an internal header file. With that, we could do any changes
to it we want, without worrying about that we may offense the painful
ABI rules.
Similar changes could be done to virtio_net struct as well, just exposing
very few fields that are necessary and moving all others to an internal
structure.
Huawei then suggested a more radical yet much cleaner one: just exposing
a virtio_net handle to application, just like the way kernel exposes an
fd to user for locating a specific file, and exposing some new functions
to access those old fields, such as flags, virt_qp_nb.
With this change, we're likely to be free from ABI violations forever
(well, except when we have to extend the virtio_net_device_ops struct).
For example, following nice cleanup would not be a blocking one then:
http://dpdk.org/ml/archives/dev/2016-February/033528.html
Suggested-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch adds a notice that the API for the xstats
functionality will be modified in the 16.07 release, with
no backwards compatibility planned as it would require
code duplication in each PMD that supports xstats.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Several new fields will be added to structure rte_port_source_params for
source port enhancement with pcap file reading support.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
The purpose of this patch is used to add a new field
"class" in rte_pci_id structure. The new class field includes
class_id, subcalss_id, programming interface of a pci device.
With this field, we can identify pci device by its class info,
which can be more flexible instead of probing the device by
vendor_id OR device_id OR subvendor_id OR subdevice_id.
For example, we can probe all nvme devices by class field, which
can be quite convenient.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add a deprecation notice for coming changes in mempool for 16.07.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Announce the ABI breakage due to addition of external mempool
manager functionality which requires changes to rte_mempool
structure.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Deprecation notice for 16.04 for changes to occur in
release 16.07 for rte_mempool memory reduction.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Hunt <david.hunt@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
