No barriers are required when stats are incremented or read.
Fixes: 96fd2bd69b ("net/sfc: support flow action count in transfer rules")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
When adding multicast and unicast MAC addresses, three descriptors and
one descriptor are required for querying or adding MAC VLAN table,
respectively. This patch uses the number of descriptors as input
parameter to complete this task to make the function more secure.
Fixes: 7d7f9f80bb ("net/hns3: support MAC address related operations")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This problem occurs in the following scenarios:
1) reset is encountered when the adapter is running.
2) set a new default MAC address
After the above two steps, the old default MAC address should be not
take effect. But the current behavior is contrary to that. This is due
to the change of the "default_addr_setted" in hw->mac from 'true' to
'false' after the reset. As a result, the old MAC address is not removed
when the new default MAC address is set. This variable controls whether
to delete the old default MAC address when setting the default MAC
address. It is only used when the mac_addr_set API is called for the
first time. In fact, when a unicast MAC address is deleted, if the
address isn't in the MAC address table, the driver doesn't return
failure. So this patch remove the redundant and troublesome variables to
resolve this problem.
Fixes: 7d7f9f80bb ("net/hns3: support MAC address related operations")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Normally when closing the device the queue memzone should be
freed. But the memzone will be not freed, when device setup
ops like:
rte_eth_bond_slave_remove
-->__eth_bond_slave_remove_lock_free
---->slave_remove
------>rte_eth_dev_internal_reset
-------->rte_eth_dev_rx_queue_config
---------->eth_dev_rx_queue_config
------------>ixgbe_dev_rx_queue_release
rte_eth_dev_close
-->ixgbe_dev_close
---->ixgbe_dev_free_queues
------>ixgbe_dev_rx_queue_release
(not been called due to nb_rx_queues and nb_tx_queues are 0)
And when queue number is changed to small size, the BIG memzone
queue index will be lost. This will lead to a memory leak. So we
should release the memzone when releasing queues.
Fixes: 460d167958 ("drivers/net: delete HW rings while freeing queues")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Normally when closing the device the queue memzone should be
freed. But the memzone will be not freed, when device setup
ops like:
rte_eth_bond_slave_remove
-->__eth_bond_slave_remove_lock_free
---->slave_remove
------>rte_eth_dev_internal_reset
-------->rte_eth_dev_rx_queue_config
---------->eth_dev_rx_queue_config
------------>i40e_dev_rx_queue_release
rte_eth_dev_close
-->i40e_dev_close
---->i40e_dev_free_queues
------>i40e_dev_rx_queue_release
(not been called due to nb_rx_queues and nb_tx_queues are 0)
And when queue number is changed to small size, the BIG memzone
queue index will be lost. This will lead to a memory leak. So we
should release the memzone when releasing queues.
Fixes: 460d167958 ("drivers/net: delete HW rings while freeing queues")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Normally when closing the device the queue memzone should be
freed. But the memzone will be not freed, when device setup
ops like:
rte_eth_bond_slave_remove
-->__eth_bond_slave_remove_lock_free
---->slave_remove
------>rte_eth_dev_internal_reset
-------->rte_eth_dev_rx_queue_config
---------->eth_dev_rx_queue_config
------------>ice_rx_queue_release
rte_eth_dev_close
-->ice_dev_close
---->ice_free_queues
------>ice_rx_queue_release
(not been called due to nb_rx_queues and nb_tx_queues are 0)
And when queue number is changed to small size, the BIG memzone
queue index will be lost. This will lead to a memory leak. So we
should release the memzone when releasing queues.
Fixes: 460d167958 ("drivers/net: delete HW rings while freeing queues")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Normally when closing the device the queue memzone should be
freed. But the memzone will be not freed, when device setup
ops like:
rte_eth_bond_slave_remove
-->__eth_bond_slave_remove_lock_free
---->slave_remove
------>rte_eth_dev_internal_reset
-------->rte_eth_dev_rx_queue_config
---------->eth_dev_rx_queue_config
------------>em_rx_queue_release
rte_eth_dev_close
-->eth_em_close
---->em_dev_free_queues
------>em_rx_queue_release
(not been called due to nb_rx_queues and nb_tx_queues are 0)
And when queue number is changed to small size, the BIG memzone
queue index will be lost. This will lead to a memory leak. So we
should release the memzone when releasing queues.
Fixes: 460d167958 ("drivers/net: delete HW rings while freeing queues")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
A more fine-grain flow API action RTE_FLOW_ACTION_TYPE_SAMPLE should
be used instead of it.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The link state change interrupt handler of the NFP PMD will delay the
actual LSC work for a short period to ensure the link is stable. If the
link of the port changes state and the port is closed immediately after
the link event then a segmentation fault will occur. This happens
because the delayed LSC work eventually triggers and this logic will try
to access private port data that had been released when the port was
closed.
Fixes: 6c53f87b34 ("nfp: add link status interrupt")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some drivers don't need Rx and Tx queue release callback, make them
optional. Clean up empty queue release callbacks for some drivers.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Upon MCAM allocation failure, free counters only if counters
were allocated earlier for the flow rule.
Fixes: f9af908074 ("common/cnxk: add mcam utility API")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reflect globally enabled Rx and Tx offloads in queue conf.
Also fix issue with lmt data prepare for multi seg.
Fixes: a24af6361e ("net/cnxk: add Tx queue setup and release")
Fixes: a86144cd9d ("net/cnxk: add Rx queue setup and release")
Fixes: 305ca2c4c3 ("net/cnxk: support multi-segment vector Tx")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds support to configure channel mask which will
be used by rte flow when adding flow rules with inline IPsec
action.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds capabitlities for AES_CBC and HMAC_SHA1 for 9k
security offload.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Sets IP6_UDP_OPT in NIX RX config to allow optional
UDP checksum for IPv6 in case of security offload.
Also disable drop_re when inline inbound is enabled.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds support to update ethertype for mixed IPsec tunnel
versions. And also sets et_overwr for inbound IPsec.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds anti replay support for cn9k platform using
SW anti replay check.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to create and submit CPT instructions on Tx
on CN10K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to receive CPT processed packets on Rx via
second pass on CN10K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to create and submit CPT instructions on Tx
on CN9K SoC.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to receive CPT processed packets on Rx for
CN9K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for inline inbound and outbound IPSec for SA create,
destroy and other NIX / CPT LF configurations.
This patch also changes dpdk-devbind.py to list new inline
device as misc device.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for inline inbound and outbound IPSec for SA create,
destroy and other NIX / CPT LF configurations.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to configure flow rules with inline IPsec action.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently only NIX0 conf is setup in AURA for backpressure.
This patch adds support for NIX1 as well.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch provides applications to add CQ support
in Tx path. This enables packet completion events on
CQ for requested packets.
Signed-off-by: Kommula Shiva Shankar <kshankar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Restore SQB AURA/POOL limit before destroying SQB to be
able to drain all the buffers from the aura.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
For CPT LF IQ enable, set CPT_LF_CTL[ENA] before setting
CPT_LF_INPROG[EENA] to true.
For CPT LF IQ disable, align sequence to that of HRM.
Also this patch aligns space for instructions in CPT LF
to ROC_ALIGN to make complete memory cache aligned and
has other minor fixes/additions.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Disable CQ drop when inline inbound is enabled. CQ drop
is not supported for second pass IPsec decrypted packets.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add API to support setting up NIX inline inbound and
NIX inline outbound. In case of inbound, SA base is setup
on NIX PFFUNC and in case of outbound, required number of
CPT LF's are attached to NIX PFFUNC.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to init and fini inline device with NIX LF,
SSO LF and SSOW LF for inline inbound IPSec in CN10K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add API to setup NIX inline device IRQ's. This registers
IRQ's for errors in case of NIX, CPT LF, SSOW and get wor
interrupt in case of SSO.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Change NIX debug API and queue API interface for use by
internal NIX inline device initialization.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Rework interface of SSO internal functions to use for NIX inline dev's
SSO LF's.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add security support to init cn9k fast path SA data
for AES GCM and AES CBC + HMAC SHA1.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
reported by "gcc (GCC) 12.0.0 20211003 (experimental)":
../drivers/net/cxgbe/cxgbe_ethdev.c:
In function ‘cxgbe_dev_rx_queue_setup’:
../drivers/net/cxgbe/cxgbe_ethdev.c:682:24:
error: the comparison will always evaluate as ‘true’ for the
address of ‘fl’ will never be NULL [-Werror=address]
682 | if ((&rxq->fl) != NULL)
| ^~
Fixing it by removing useless check.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Adjust parameters order to eth_xstats_get_by_id_t prototype.
Make ids the second parameter similar to eth_xstats_get_by_id_t.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The af_packet pmd driver binds to a raw socket and allows sending and
receiving of packets through the kernel.
Since commit [1], the kernel strips the vlan tags early in
__netif_receive_skb_core(), so we receive untagged packets while running
with the af_packet pmd.
Luckily for us, the skb vlan-related fields are still populated from the
stripped vlan tags, so we end up having all the information that we need
in the mbuf.
Having the pmd driver support DEV_RX_OFFLOAD_VLAN_STRIP allows the
application to control the desired vlan stripping behavior, until we
have a way to describe offloads that can't be disabled by pmd drivers.
This patch will cause a change in the default way that the af_packet pmd
treats received vlan-tagged frames. While previously, the application
was required to check the PKT_RX_VLAN_STRIPPED flag, after this patch,
the pmd will re-insert the vlan tag transparently to the user, unless
the DEV_RX_OFFLOAD_VLAN_STRIP is enabled in rxmode.offloads.
I've attempted a preliminary benchmark to understand if the change could
cause a sizable performance hit.
Setup:
Two virtual machines running on top of an ESXi hypervisor
Tx: DPDK app (running on top of vmxnet3 PMD)
Rx: af_packet (running on top of a kernel vmxnet3 interface)
Packet size :68 (packet contains a vlan tag)
Rates:
Tx - 1.419 Mpps
Rx (without vlan insertion) - 1227636 pps
Rx (with vlan insertion) - 1220081 pps
At a first glance, we don't seem to have a large degradation in terms of
packet rate.
[1]
https://github.com/torvalds/linux/commit/bcc6d47903612c3861201cc3a866fb60
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support to fetch port and queue stats via xstats API. Also remove
queue stats from basic stats because they're now available via xstats
API for the VF.
Signed-off-by: Nikhil Vasoya <nikhil.vasoya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Previously, memif socket hash is always allocated on NUMA socket 0.
If the application is entirely running on another NUMA socket and EAL
--socket-limit prevents memory allocation on NUMA socket 0, memif
creation fails with "HASH: memory allocation failed" error.
This patch allows allocating memif socket hash on any NUMA socket.
Signed-off-by: Junxiao Shi <git@mail1.yoursunny.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
An issue exists on some HW revisions whereby if a CQ overflows
NIX may have undefined behavior, e.g. free incorrect buffers.
Implementing a workaround for this known HW issue.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As per an known HW issue RVUM interrupts may get dropped, If an RVUM
interrupt event occurs when PCCPF_XXX_MSIX_CAP_HDR[MSIXEN]=0 then no
interrupt is triggered, which is expected. But after MSIXEN is set to
1, subsequently if same interrupts event occurs again, still no
interrupt will be triggered.
As a workaround, all RVUM interrupt lines should be cleared between
MSIXEN=0 and MSIXEN=1.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Definition of `rte_ether_addr` structure used a workaround allowing DPDK
and Windows SDK headers to be used in the same file, because Windows SDK
defines `s_addr` as a macro. Rename `s_addr` to `src_addr` and `d_addr`
to `dst_addr` to avoid the conflict and remove the workaround.
Deprecation notice:
https://mails.dpdk.org/archives/dev/2021-July/215270.html
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
This patch enables building the ixgbe driver for Windows.
It also enables its dependencies on security and cryptodev.
I tested on AWS using ixgbe VF device, using dpdk-testpmd.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
If some of the VA entries of table are somehow not populated and are
NULL, it can add offset to NULL and return the invalid VA in PA to
VA conversion.
In this patch, adding a check if the VA entry has valid address only
then add offset and return VA.
Fixes: 2f3d633aa5 ("common/dpaax: add library for PA/VA translation table")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
There is no need for preventional check of rte_lcore_id() in
data path. This patch removes the same.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
RAW configure and Queue setup APIs support size parameter for
configure. This patch supports the same for DPAA2 QDMA PMD APIs
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds comment to explain how dpaa_port_fmc_ccnode_parse
function is working to get the HW queue from FMC policy file
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch updates the RSS support to support following additional
distributions:
- VLAN
- ESP
- AH
- PPPOE
Signed-off-by: Vanshika Shukla <vanshika.shukla@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TX redirection support by flow action RTE_FLOW_ACTION_TYPE_PHY_PORT
and RTE_FLOW_ACTION_TYPE_PORT_ID
This action is executed by HW to forward packets between ports.
If the ingress packets match the rule, the packets are switched
without software involved and perf is improved as well.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Updating MC firmware support APIs to be latest. It supports
improved DPDMUX (SRIOV equivalent) for traffic split between
dpnis and additional PTP APIs.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Finding with "librt" keyword would give the output with
full path of librt such as
/usr/lib/gcc/x86_64-linux-gnu/7/../../../x86_64-linux-gnu/librt.so
instead of -lrt in libdpdk.pc pkg-config file.
Assume find_library() will prepend "lib", thus remove
"lib" from "librt" keyword. The output will shows
as -lrt.
This will cause an issue when compile DPDK app with
static library as the path of librt has been hard-coded
in the libdpdk.pc file.
Fixes: e41856b515 ("raw/ifpga/base: enhance driver reliability in multi-process")
Cc: stable@dpdk.org
Signed-off-by: Mohamad Noor Alim Hussin <mohamad.noor.alim.hussin@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The mlx5 PMD for regex class uses an MMO WQE operated by the GGA engine
in BF devices.
Currently, all the MMO WQEs are managed by the SQ object.
Starting from BF3, the queue of the MMO WQEs should be connected to the
GGA engine using a new configuration, MMO, that will be supported only
in the QP object.
The FW introduced new capabilities to define whether the MMO
configuration should be configured for the GGA queue.
Replace all the GGA queue objects to QP, set MMO configuration according
to the new FW capabilities.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The mlx5 PMD for compress class uses an MMO WQE operated by the GGA
engine in BF devices.
Currently, all the MMO WQEs are managed by the SQ object.
Starting from BF3, the queue of the MMO WQEs should be connected to the
GGA engine using a new configuration, MMO, that will be supported only
in the QP object.
The FW introduced new capabilities to define whether the MMO
configuration should be configured for the GGA queue.
Replace all the GGA queue objects to QP, set MMO configuration according
to the new FW capabilities.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
A new configuration MMO was added to QP Context.
If set, MMO WQEs are supported on this QP.
For DMA MMO, supported only when dma_mmo_qp==1.
For REGEXP MMO, supported only when regexp_mmo_qp==1.
For COMPRESS MMO, supported only when compress_mmo_qp==1.
For DECOMPRESS MMO, supported only when decompress_mmo_qp==1.
Add support to DevX interface to set MMO bit.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
New MMO HCA capabilities were added and others were renamed.
Align hca capabilities with new prm.
Add support in DevX interface for changes in HCA capabilities.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently drivers using QP (vDPA, crypto and compress, regex soon)
manage their memory, creation, modification and destruction of the QP,
in almost identical code.
Move QP memory management, creation and destruction to common.
Add common function to change QP state to RTS.
Add user_index attribute to QP creation.
It's for better code maintenance and reuse.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Caught running ASAN.
The device name was leaked on scan.
rte_device name field being a const, use a local pointer and release
in error path.
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Long Li <longli@microsoft.com>
Fixed with ./devtools/update-abi.sh $(cat ABI_VERSION)
Fixes: e73a7ab224 ("net/softnic: promote manage API")
Fixes: 8f532a34c4 ("fib: promote API to stable")
Fixes: 4aeb92396b ("rib: promote API to stable")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Code changes done for build issue as reported in Bug 817
error: dereferencing type-punned pointer will break strict-aliasing rules.
added union to avoid pointer dereferencing
The build issue has been reported with both gcc 4.8.5 (RHEL 7) and
gcc 5.4.0 (Ubuntu 16.04).
Bugzilla ID: 817
Fixes: 39925373a3 ("net/ice/base: add parser execution main loop")
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use bool type for function's switch parameter,
this could avoid passing "1" or "0" which is not reader friendly.
Signed-off-by: Jilei Chen <chenjilei@cmss.chinamobile.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
VFs are not allowed to change physical link params when a port
module change is detected. The firmware already returns appropriate
permission error when VF tries to change physical link params. But,
make sure to avoid sending the command to firmware from VF in the
first place and prevent flooding firmware debug logs with permission
errors.
Fixes: a83041b1e9 ("net/cxgbe: rework and simplify link handling")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Vasoya <nikhil.vasoya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The metadata can be set in the mbuf dynamic field and then used in
flow rules steering for egress direction. The hardware requires
network order for both the insertion of a rule and sending a packet.
Indeed, there is no strict restriction for the endianness. The order
for sending a packet and its steering rule should be consistent.
In the past, there was no endianness conversion due to the
performance reason. The flow rule converted the metadata into little
endian for hardware (if needed) and the packet hit the flow rule also
with little endian.
After the metadata was converted to big endian, the missing adaption
in the data path resulted in a flow miss of the egress packets.
Converting the metadata to big endian before posting a WQE to the
hardware solves this issue.
Fixes: b57e414b48 ("net/mlx5: convert meta register to big-endian")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In the function mlx5_alloc_shared_dr(), there are various reasons
to result in a failure and error clean up process. While in the
caller of mlx5_dev_spawn(), once there is a error occurring after
the mlx5_alloc_shared_dr(), the mlx5_os_free_shared_dr() is called
to release all the resources.
To prevent a double release, the pointers of the resources should
be checked before the releasing and set to NULL after done.
In the mlx5_free_table_hash_list(), after the releasing, the pointer
was missed to set to NULL and a double release may cause a crash.
By setting the tables pointer to NULL as done for other resources,
the double release and crash could be solved.
Fixes: 54534725d2 ("net/mlx5: fix flow table hash list conversion")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch support new global device syntax like:
bus=pci,addr=BB:DD.F/class=eth/driver=mlx5,devargs,..
In driver parameters check, ignores "driver" key which is part of new
global device syntax instead of reporting error.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch removes the simplification in Virtio descriptors
handling, where their buffer addresses are IOVAs for Virtio
PCI devices, and VA-only for Virtio-user devices, which
added a requirement on Virtio-user that it only supported
IOVA as VA.
This change introduced a regression for applications using
Virtio-user and other physical PMDs that require IOVA as PA
because they don't use an IOMMU.
This patch reverts to the old behaviour, but needed to be
reworked because of the refactoring that happened in v21.02.
Fixes: 17043a2909 ("net/virtio: force IOVA as VA mode for virtio-user")
Cc: stable@dpdk.org
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When attaching to an existing mono queue tap, the virtio-user was not
reporting that the virtio device was not properly initialised which
prevented from starting the port later.
$ ip tuntap add test mode tap
$ dpdk-testpmd --vdev \
net_virtio_user0,iface=test,path=/dev/vhost-net,queues=2 -- -i
...
virtio_user_dev_init_mac(): (/dev/vhost-net) No valid MAC in devargs or
device, use random
vhost_kernel_open_tap(): TUNSETIFF failed: Invalid argument
vhost_kernel_enable_queue_pair(): fail to open tap for vhost kernel
virtio_user_start_device(): (/dev/vhost-net) Failed to start device
...
Configuring Port 0 (socket 0)
vhost_kernel_open_tap(): TUNSETIFF failed: Invalid argument
vhost_kernel_enable_queue_pair(): fail to open tap for vhost kernel
virtio_set_multiple_queues(): Multiqueue configured but send command
failed, this is too late now...
Fail to start port 0: Invalid argument
Please stop the ports first
Done
The virtio-user with vhost-kernel backend was going through a lot
of complications to initialise tap fds only when using them.
For each qp enabled for the first time, a tapfd was created via
TUNSETIFF with unneeded additional steps (see below) and then mapped to
the right qp in the vhost-net backend.
Unneeded steps (as long as it has been done once for the port):
- tap features were queried while this is a constant on a running
system,
- the device name in DPDK was updated,
- the mac address of the tap was set,
On subsequent qps state change, the vhost-net backend fd mapping was
updated and the associated queue/tapfd were disabled/enabled via
TUNSETQUEUE.
Now, this patch simplifies the whole logic by keeping all tapfds opened
and in enabled state (from the tap point of view) at all time.
Unused ioctl defines are removed.
Tap features are validated earlier to fail initialisation asap.
Tap name discovery and mac address configuration are moved when
configuring qp 0.
To support attaching to mono queue tap, the virtio-user driver now tries
to attach in multi queue first, then fallbacks to mono queue.
Finally (but this is more for consistency), VIRTIO_NET_F_MQ feature is
exposed only if the underlying tap supports multi queue.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fix the tunnel port counting logic.
Currently we are incrementing the port count without checking
the if bnxt_hwrm_tunnel_dst_port_alloc would return success or failure.
Modify the logic to increment it only if the firmware returns success.
Fixes: 10d074b202 ("net/bnxt: support tunneling")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
The error recovery async event messages are often mistaken
for errors. Improved the wording to clarify the meaning of
these events.
Also, take the first step towards more inclusive language.
The references to master will be changed to primary.
For example: "bnxt_is_master_func" will be renamed to
"bnxt_is_primary_func()".
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
The device cleanup logic was freeing most of the ring related memory,
but was not freeing up the memzone associated with the rings.
This patch fixes the issue.
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Default queue state of Tx queues on startup is not correct.
Fix this by setting the state when the port is started.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
1. Fix to use correct fields in the request structure of
HWRM_FUNC_DRV_RGTR.
2. Remove the "flags" argument to bnxt_hwrm_func_driver_unregister()
as it is not needed.
Fixes: beb3087f50 ("net/bnxt: add driver register/unregister")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add ice support for new ethdev APIs to enable/disable and read/write/adjust
IEEE1588 PTP timestamps. Currently, only scalar path supports 1588 PTP,
vector path doesn't.
The example command for running ptpclient is as below:
./build/examples/dpdk-ptpclient -c 1 -n 3 -- -T 0 -p 0x1
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The request of getting VF VSI map request may fail when DCF is busy,
this patch adds retry mechanism to make it able to succeed.
Fixes: b09d34ac85 ("net/ice: fix flow redirector")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
In the iavf_init_arq function, if an exception occurs in the
iavf_config_arq_regs function, and the previously applied ARQ (Admin
Receive Queue) bufs resource is released. This patch maintains the same
modification as the iavf_init_asq function to roll back resources.
Fixes: 87aca6d8d8 ("net/iavf/base: fix command buffer memory leak")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the iavf_config_rx_queues_irqs function, the memory pointed to by the
intr_handle->intr_vec and qv_map addresses is not released in the
subsequent hook branch, resulting in resource leakage.
Fixes: f593944fc9 ("net/iavf: enable IRQ mapping configuration for large VF")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use the dynamic mbuf to register timestamp field and flag.
The ice has the feature to dump Rx timestamp value into dynamic
mbuf field by flex descriptor. This feature is turned on by dev
config "enable-rx-timestamp". Currently, it's only supported
under scalar path.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The default VF driver for Intel 700 Series Ethernet Controller already
switch to iavf in DPDK 21.05. And i40evf is no need to maintain now,
so remove i40evf related code.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Due to i40evf will be removed, so there's no need to keep the devargs
option "driver=i40evf" in iavf.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add IPv4 header checksum field selector, it can be used in creating
FDIR or RSS rules related to IPv4 header checksum.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If call ice_flow_rem_entry() directly without checking entry_id, may
cause an ACL flow entry to be freed more than once.
This patch tries to find entry_id first, then call ice_flow_rem_entry()
to avoid the defect.
Fixes: 40d466fa9f ("net/ice: support ACL filter in DCF")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Reviewed-by: Simei Su <simei.su@intel.com>
There is currently a scenario test, which will continuously obtain port
statistics, causing the CPU usage to soar, which does not meet the
demand. After positioning analysis, it is found that the VF and PF
command interaction is completed through the iavf_execute_vf_cmd
function.
After the message is sent, it needs to wait for the interrupt thread to
obtain the response from the PF. For the data, the rte_delay_ms
interface is used here to wait, but the CPU will not be released during
the waiting period of this interface, which will cause the statistics to
keep occupying the CPU. This is also the root cause of the soaring CPU.
The command interaction should belong to the control plane, and there
will not be too high requirements for performance. It is recommended to
wait for the interface iavf_msec_delay to complete without taking up the
CPU time.
Fixes: 22b123a36d ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The macros PMD_*_LOG already include the line feed character.
Redundant \n are removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Report max/min/align Tx descriptors limits in device info get callback.
Before calling the callback, rte_eth_dev_info_get() provides
default values of nb_min as zero and nb_max as UINT16_MAX that are
not correct for the driver, so one can't rely on them.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
According to virtio spec, the device MUST reset when 0 is written to
device_status, and present 0 in device_status once reset is done.
This patch waits status value to be 0 during reset operation, if
timeout in 3 seconds, log and continue.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Free Tx completed mbufs on device stop. Not completed Tx mbufs cannot be
freed since they are still in use.
Fixes: c1f86306a0 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
There is a family of cleanup from completed transmits functions.
Fix packed virtqueues cleanup functions to have the same signature
as split virtqueues have. This lets all functions of the family to
match the same callback prototype.
Fixes: 892dc798fa ("net/virtio: implement Tx path for packed queues")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds an ROC API to merge base steering rule with rules
added by VF.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Add support for reading NPA/SSO pf_func which will be used
by a PSM to access NPA/SSO. PSM is a hardware block capable
of dispatching jobs to different blocks within a baseband
module.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add support for reading NPA/SSO pf_func which will be used
by a PSM to access NPA/SSO. PSM is a hardware block capable
of dispatching jobs to different blocks within a baseband
module.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Name needs to be prepared before the lookup otherwise
PMD will not be released.
Fixes: 24d9c5d59d ("raw/cnxk_bphy: add baseband PHY skeleton driver")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Due to wrong size of mbox message allocated for sending link status
to the VF, incorrect link status is observed.
Fixes: cb8d769fb6 ("common/octeontx2: send link event to VF")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
NPC MCAM entry distribution is based on maximum number of PFs and LFs
available. Fixing the max no of PFs and LFs available on cn98xx to
fix the MCAM alloc entry range.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In case of cn98xx, 2 NIX blocks and 4 LBK blocks are present. Moreover
AF VFs are alternatively attached to NIX0 and NIX1 to ensure load
balancing. To support loopback functionality between pairs NIX0/NIX1
are attached to LBK1/LBK2 for transmission/reception respectively.
But in this default configuration NIX blocks cannot receive the
packets they sent from the same LBK, which is an important requirement
as some ODP applications only uses one AF VF for loopback functionality.
To support this scenario, NIX0 can use LBK0 (NIX1 - LBK3) by setting a
loop flag while making LF alloc mailbox request.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Queue counter is used in a few places so it was given some
reasonable name.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
There is an inconsistency in naming interrupt control
functions. This patch aligns names accordingly.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Some functions are not used outside of local ROC scope. These need
updating classifiers and removal from header.
Signed-off-by: Jakub Palider <jpalider@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
One should only use roc_api.h which exports all internal headers.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
If particular LMAC does not exist then it's saner to return ENODEV
instead of EINVAL.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Platform specific TM tree hierarchy details are part of common cnxk
driver. This patch introduces missing HAL APIs to return state of
TM hierarchy required to support ethdev TM operations inside cnxk PMD.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Different TM handlers returns various platform specific errors,
this patch introduces new API to convert these internal error
types to RTE_TM* error types.
Also updated error message API with missed TM error types.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add new macros to reflect HW shaper PPS limits. New API to validate
input rates for packet mode. Increase adjust value to support lesser
PPS (<61).
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Each NIX interface had one or more SMQs connected to SQs to send
packets. When flush enabled on SMQ, hardware will push all packets
from SMQ to physical link. This API will enable flush on all SMQs
of an interface.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
For SDP interface all platforms supports up to 65535 frame size.
Updated API with new check for SDP interface.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Currently there are some public headers that include 'sys/queue.h', which
is not POSIX, but usually provided by the Linux/BSD system library.
(Not in POSIX.1, POSIX.1-2001, or POSIX.1-2008. Present on the BSDs.)
The file is missing on Windows. During the Windows build, DPDK uses a
bundled copy, so building a DPDK library works fine. But when OVS or other
applications use DPDK as a library, because some DPDK public headers
include 'sys/queue.h', on Windows, it triggers an error due to no such
file.
One solution is to install the 'lib/eal/windows/include/sys/queue.h' into
Windows environment, such as [1]. However, this means DPDK exports the
functionalities of 'sys/queue.h' into the environment, which might cause
symbols, macros, headers clashing with other applications.
The patch fixes it by removing the "#include <sys/queue.h>" from
DPDK public headers, so programs including DPDK headers don't depend
on the system to provide 'sys/queue.h'. When these public headers use
macros such as TAILQ_xxx, we replace it by the ones with RTE_ prefix.
For Windows, we copy the definitions from <sys/queue.h> to rte_os.h
in Windows EAL. Note that these RTE_ macros are compatible with
<sys/queue.h>, both at the level of API (to use with <sys/queue.h>
macros in C files) and ABI (to avoid breaking it).
Additionally, the TAILQ_FOREACH_SAFE is not part of <sys/queue.h>,
the patch replaces it with RTE_TAILQ_FOREACH_SAFE.
[1] http://mails.dpdk.org/archives/dev/2021-August/216304.html
Suggested-by: Nick Connolly <nick.connolly@mayadata.io>
Suggested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
- Enable IAVF PMD build on Windows
- Replace x86intrin.h with rte_vect.h to avoid __m_prefetchw conflicting
types
- Fix for pointer and integer sign warnings using Clang compiler on
Windows
- Add extra cflags '-fno-asynchronous-unwind-tables'
to avoid MinGW build error:
Error: invalid register for .seh_savexmm
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Shivanshu Shukla <shivanshu.shukla@intel.com>
Based on the rte_eth_dev_socket_id() documentation,
set the default numa_node to -1. When the API is unsuccessful,
set numa_node to 0.
This change more correctly resembles the Linux code.
Fixes: bf7cf1f947 ("bus/pci: fix unknown NUMA node value on Windows")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
A quite common scenario with kvargs is to lookup for a <key>=<value> in
a kvlist. For instance, check if name=foo is present in
name=toto,name=foo,name=bar. This is currently done in drivers/bus with
rte_kvargs_process() + the rte_kvargs_strcmp() handler.
This approach is not straightforward, and can be replaced by this new
function.
rte_kvargs_strcmp() is then removed.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
We should eliminate the timestamp status from the packet
status. This should only matter if timestamping is enabled
on the socket, but we might hit a kernel bug, which is fixed
in newer releases.
For interfaces of type 'veth', the sent skb is forwarded
to the peer and back into the network stack which timestamps
it on the RX path if timestamping is enabled globally
(which happens if any socket enables timestamping).
When the skb is destructed, tpacket_destruct_skb() is called
and it calls __packet_set_timestamp() which doesn't check
the flags on the socket and returns the timestamp if it is
set in the skb (and for veth it is, as mentioned above).
See the following kernel commit for reference [1]:
net: packetmmap: fix only tx timestamp on request
The packetmmap tx ring should only return timestamps if requested
via setsockopt PACKET_TIMESTAMP, as documented. This allows
compatibility with non-timestamp aware user-space code which checks
tp_status == TP_STATUS_AVAILABLE; not expecting additional timestamp
flags to be set in tp_status.
[1] https://www.spinics.net/lists/kernel/msg3959391.html
Signed-off-by: Mihai Pogonaru <pogonarumihai@gmail.com>
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This updates the gtp_psc flow item to use the net header
definition of the gtp_psc to be based on RFC 38415-g30
Signed-off-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously, TX functions call rte_pktmbuf_is_contiguous to determine
whether an mbuf is chained. However, rte_pktmbuf_is_contiguous is
designed to work on the first mbuf of a packet only. In case a packet
contains three or more segment mbufs in a chain, it may cause truncated
packets or rte_mbuf_sanity_check panics.
This patch updates TX functions to determine chained mbufs using
mbuf_head->nb_segs field, which works in all cases. Moreover, it
maintains that the second cacheline is only accessed when chained mbuf
is actually present.
Fixes: 09c7e63a71 ("net/memif: introduce memory interface PMD")
Fixes: 43b815d881 ("net/memif: support zero-copy slave")
Cc: stable@dpdk.org
Signed-off-by: Junxiao Shi <git@mail1.yoursunny.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
Shared RSS resources were released before checking that the shared RSS
has no more references. If it had, the destruction was aborted, leaving
the shared RSS in an invalid state where it could no longer be used.
Move reference counter check before resource release.
Fixes: d2046c09aa ("net/mlx5: support shared action for RSS")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When an indirect action is used in a flow rule with a pattern that
causes RSS expansion, each device flow generated by the expansion
incremented the reference counter of the action. When such a flow was
destroyed, its action reference counter had been decremented only once.
The action remained marked as being used and could not be destroyed.
COUNT, AGE, and CONNTRACK indirect actions have been affected
(for AGE the error was not immediately observable).
Increment action counter only once for the original flow rule.
Fixes: 81073e1f8c ("net/mlx5: support shared age action")
Fixes: 2d084f69aa ("net/mlx5: add translation of connection tracking action")
Fixes: f3191849f2 ("net/mlx5: support flow count action handle")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When an indirect CT action of mlx5 PMD could not be destroyed,
rte_action_handle_destroy() was returning (-1), but the error
structure was not filled. This lead to a segfault in testpmd
on an attempt to print it. Fill the details for each possible
cause of this error.
Fixes: c5a49265fc ("net/mlx5: add ASO connection tracking destroy")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The common remove function call in a loop to remove function for each
driver which have been registered.
If all removes are succeeded, it return 0 without to free the device
which allocated in probe function. Otherwise, it free the device.
In fact we expect exactly the opposite behavior. If all removes are
failed, it returns error without freeing the device which allocated in
probe function. Otherwise, it free the device and return 0.
Replace it with the correct behavior.
Fixes: 8a41f4decc ("common/mlx5: introduce layer for multiple class drivers")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The mlx5 common driver has a global list of mlx5 devices which are
probed.
In probe function it creates one and insert it to the list. Similarly it
removes the device in remove function.
These operations are not safe as there can be such operations in
parallel, by different threads.
Add global lock for the list and use it to insert or remove.
Fixes: 8a41f4decc ("common/mlx5: introduce layer for multiple class drivers")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The common probe function gets as a user argument the classes it should
create, and checks whether the combination is valid.
In case the device already exists, it checks the integration of the
above with the classes that the device has.
However, the function does not check the combination when the device
does not exist and it has to create it.
Check if the combination is valid for all cases.
Fixes: ad435d3204 ("common/mlx5: add bus-agnostic layer")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In order to allow/disallow configuring rules with identical patterns,
the new device argument 'allow_duplicate_pattern' was introduced.
The default is to allow, and it is initialized to 1 in PCI probe
function.
However, on auxiliary bus probing (for Sub-Function) it is not
initialized at all, so it's actually initialized to 0.
Move the initialization to default config function which is called from
both.
Fixes: 919488fbfa ("net/mlx5: support Sub-Function")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
During PCI probe, the internal probe function is called per PF.
If one of them fails, it was missing a proper destroy for the previously
probed PFs.
This fixes the behavior by destroying all previously probed PFs.
Fixes: 08c2772fc7 ("net/mlx5: support list of representor PF")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In shared device context creation, there is a missing validation when
one of the btree memory allocation fails that will cause a memory leak.
This adds a proper check to clean resources in case of failure.
Fixes: 632f0f1905 ("net/mlx5: manage shared counters in three-level table")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
1. Added support to specify l4 port masks in the template. Also enabled
source mac in the wild card key for ingress flows.
2. Added support to enable offload for ipv6 traffic within the vxlan
tunnel connection.
3. The flow counters is reduced from 7168 to 6912 for Whitney.
The stats operation is updated to reflect counts for packets
at egress from CFA instead of ingress to CFA
4. The miss path for the l2 context table is updated with correct
parif and default action handler to handle the miss path for
egress flows.
5. This support enables allocation of encapsulation, modification and
action records dynamically based on a given flow actions.
6. Reduce the l2context resource requests during open_session. Move the
SMAC from the L2Context to the EM/WM
7. Remap the parif in the bd action in order to eliminate incorrect
replication of broadcast packets. The layer 4 source port mask
was incorrectly updated in the outer layer 4 source port mask
instead of inner layer 4. Add the l3 proto to egress rules, switch
to using computed fields for l4 ports, add internal smac to f1/f2
flows, add l3 proto to ingress ipv6 flows
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix shared session support issues due to SRAM manager
additions. Shared session does not support slices within
RM blocks. Calculate resources required without slices
and determine base addresses using old methods for the
shared session.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The dynamic pool allocation defrag function currently uses stack
allocation. To improve use of stack space, dynamically allocate
and deallocate memory for use to defragment the dynamic pool of
EM resources.
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Adjust info message to debug level to prevent excessive
logging.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Add support for egress flows with port and count action for
Thor platform.
2. Added templates to support VXLAN encapsulation feature for Thor.
3. Added support for VXLAN decap and VLAN pop actions along with
the ingress flow.
4. Added templates to enable VXLAN decap support for f1 and f2 flows.
5. Added templates Thor VF Rep support
6. Added Thor ingress mod table actions for NAT, NAPT, and TTL.
7. Added mirror/sample table support
8. Added supported for IPv6 flows for Thor.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The wild card TCAM for Thor platform is different from the profile TCAM
byte order.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The encapsulation record processing is enhanced to handle data
dynamically. Different combinations of VXLAN encapsulation using
no VLAN or single or double VLAN can be supported and also supports
both IPv4 and IPv6 versions.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for tunnel offload APIs. Specifically the following
are supported.
tunnel_decap_set, tunnel_match, tunnel_action_decap_release,
tunnel_item_release.
This provides support for VXLAN decap action where two flows
can indicate tunnel offload rule. The first flow indicates the
tunnel properties and second flow indicates the inner packet
structure. The templates are updated to support this
feature.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Template adds non-VFR based support for testpmd with:
matches to include
- DMAC, SIP, DIP, Proto, Sport, Dport
- SIP, DIP, Proto, Sport, Dport
actions:
- count, drop
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The SRAM manager supports allocation and free of variable sized
records within SRAM memory. These record sizes are 8, 16, 32, or
64B. The SRAM manager algorithm will not fragment memory during
run time. Previous implementation only included fixed size 64B
records regardless of the size required.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds flow meter drop counter support for Thor.
Signed-off-by: Jay Ding <jay.ding@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update the TruFlow core index table and
remove unused shadow table functionality.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Network Pool accelerator (NPA) is part of ROC (Rest Of Chip). So
NPA structures should be aligned to ROC Cache line size and not
CPU cache line size.
Non alignment of NPA stack to ROC cache line will result in
undefined runtime NPA behaviour.
Fixes: f765f56112 ("common/cnxk: add NPA pool HW operations")
Cc: stable@dpdk.org
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Issue has been observed where fields of indirect buffers are
accessed after being set free by the diver. Also fixing freeing
of direct buffers to correct aura.
Fixes: 5cbe184802 ("net/octeontx: support fast mbuf free")
Cc: stable@dpdk.org
Signed-off-by: David George <david.george@sophos.com>
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Avoid using stashing option of stype in NPA in cn10k-a0 stepping.
This is a workaround for a HW Errata due to which NPA stashing operations
will never result in writing the data into L2 cache. But instead, it will
be written into LLC.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Made following updates to ROC (Rest of Chip) models.
- Use consistent upper/lower case in macros defining different
ROC models.
- Add API to detect cn96 Cx stepping.
- Make all current cn10k models as A0 stepping.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Lower values denote higher priority with 0 as the maximum.
The usage of priority in non-pipeline mode is wrong.
This patch fixed this issue in switch filter and added input
validation of priority in FDIR, RSS and ACL filter which
only support one priority level.
Fixes: 2321e34c23 ("net/ice: support flow priority for DCF switch filter")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For VF hosted by Intel 700 series NICs, internal Rx interrupt and adminq
interrupt share the same source, that cause a lot CPU cycles be wasted on
interrupt handler on Rx path.
The patch disable PCI interrupt and remove the interrupt handler, replace
it with a low frequency(50ms) interrupt polling daemon which is
implemented by registering an alarm callback periodically.
The virtual channel capability bit VIRTCHNL_VF_OFFLOAD_WB_ON_ITR can be
used to negotiate if iavf PMD needs to enable background alarm or not, so
ideally this change will not impact the case hosted by Intel 800 series
NICS.
This patch implements the same logic with an early i40e commit:
commit 864a800d70 ("net/i40e: remove VF interrupt handler")
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To support independent IP fragment default RSS, considerable
additional work need to be done, so we decide to remove this
feature to avoid some unexpected behavior we have observed,
meanwhile user always can use rte_flow to create RSS for IP
fragment packet explicitly.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To support independent IP fragment default RSS, considerable
additional work need to be done, so we decide to remove this
feature to avoid some unexpected behavior we have observed,
meanwhile user always can use rte_flow to create RSS for IP
fragment packet explicitly.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the iavf_dev_rx_queue_start function, if the iavf_switch_queue
or iavf_switch_queue_lv function fails, the previously applied mbuf
is not released, resulting in leakage. The patch fixes the problem.
Fixes: 9cf9c02bf6 ("net/iavf: add enable/disable queues for large VF")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The E810 supports four single-ended GPIO signals (SDP[20:23]). The 1PPS
signal outputs via SDP[20:23], which is measured by an oscilloscope.
This feature can be turned by a devargs which can select GPIO pin index
flexibly. Pin index 0 means SDP20, pin index 1 means SDP21 and so on.
The example for test command is as below:
./build/app/dpdk-testpmd -a af:00.0,pps_out='[pin:2]' -c f -n 4 -- -i
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add API ice_parser_profile_init to init a parser profile base on
a parser result and a mask buffer. The ice_parser_profile can feed to
low level FXP engine to create HW profile / field vector directly.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Implement function ice_parser_rt_execute which perform the main
loop of the parser.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add internal helper function ice_xlt_kb_flg_get to aggregate 64 bit
packet flag into 16 bit key builder flags.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add internal helper function ice_bst_tcam_match to perform ternary
match on boost TCAM.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Parse DDP section ICE_SID_RXPARSER_CAM into an array of
ice_bst_tcam_item.
Parse DDP section ICE_SID_LBL_RXPARSER_TMEM into an array of
ice_lbl_item.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Parse DDP section ICE_SID_RXPARSER_CAM or ICE_SID_RXPARSER_PG_SPILL
into an array of struct ice_pg_cam_item.
Parse DDP section ICE_SID_RXPARSER_NOMATCH_CAM or
ICE_SID_RXPARSER_NOMATCH_SPILL into an array of struct ice_pg_nm_cam_item.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Parse DDP section ICE_SID_RXPARSER_IMEM into an array of
struct ice_imem_item.
The Instruction Memory (IMEM) section contains three VLIW instructions
for the ALUs, a key extraction instruction for the Parse Graph CAM, and
several other fields.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add new parser module which can parse a packet in binary
and generate information like ptype, protocol/offset pairs
and flags which can be used to feed the FXP profile creation
directly.
The patch added skeleton of the parser instance create and
destroy APIs:
ice_parser_create
ice_parser_destroy
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Update ice_hw_autogen.h.
Remove duplicated one in ice_nvm.h.
Replace ICE_NVM_ACCESS_GL_HIBA_MAX with GL_HIBA_MAX_INDEX.
Signed-off-by: Scott W Taylor <scott.w.taylor@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add support for controlling SMA (SubMiniature version A) connectors
using GPIO get/set AQs.
Signed-off-by: Maciej Machnikowski <maciej.machnikowski@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add functions used by the driver for setting and getting the shared
driver parameters. These will be used by the driver in order to share
the PTP clock index identifier between PF drivers.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Added the memory needed for the generic checksum offload (GCO)
feature, including the new flex descriptor ICE_RXDID_GSC.
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add a helper function to check if the underlying part can
support 100M speeds.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
DDP package format is shared with different devices, for E810 device
we only support SEGMENT_TYPE_ICE_810.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
E810-T supports signed netlists and to support this, the NVM update
tool needs to be able to read the GL_MNG_DEF_DEVID register. Add
said register to the allowlist in ice_validate_nvm_rw_reg.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Change one of the input parameter (addr) in ice_read_cgu_reg_e822 and
ice_write_cgu_reg_e822 functions. This will avoid the shrink down
conversion from addr to cgu_msg.msg_addr_low.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Currently shared code API does not allow to set/unset lb_en
and lan_en flags for advanced rules during their creation.
Because of that we have to use a workaround in switchdev
which is to update rule immediately after its creation.
This change will allow us to set/unset those flags right
away.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
For some operating systems, 64-bit division requires using specific
implementations. Use the DIV_64BIT macro to replace open-coded division
so that the driver may convert this to the appropriate operating-system
specific implementation when necessary.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
In some devices, the function numbers used are non-contiguous. For
example, some two port devices will report as functions 0 and 2.
When distributing RSS and FDIR masks, which are global resources across
the active devices, it is required to have a contiguous PF id, which can
be described as a logical PF id. In the case above, function 0 would
have a logical PF id of 0, and function 2 would have a logical PF id of
1.
Using logical PF id can properly describe which slice of resources can
be used by a particular PF.
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Junfeng Guo <junfeng.guo@intel.com>
Add missing initialisation of the accumulative SW xstat to
zero since it is sum of per-queue xstats.
Fixes: fdd7719eb3 ("net/sfc: add xstats for Rx/Tx doorbells")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
If the bond device was created by vdev mode, the kvlist was not free
after the bond device was closed.
This patch fixes it.
Fixes: 144dc47399 ("net/bonding: fix leak on remove")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Lifetime tracking is not supported by hardware and is not implemented in
software either. Return failure when lifetime is configured.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for SA lifetime configuration. Expiry can
be either in units of octets or packets.
Also, updated cryptodev dequeue path to update crypto op result to
indicate soft expiry.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Adding IV in SA in lookaside IPsec debug mode. It helps
to verify lookaside PMD using known outbound vectors in
lookaside autotest.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The driver creates an indirect mkey per entry in the queue to manage the
crypto operation using the BSF fields.
The indirect mkeys were never released neither while error occurs in the
creation phase nor when the queue is released.
Clean the indirect mkeys in the above cases.
Fixes: c2a42d19d9 ("crypto/mlx5: add WQE set initialization")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The crypto QP consumer (ci) and producer (pi) indexes are increased
with each successful enqueue/dequeue operations.
However the QP pi index is calculated with a wraparound the number
of elements while the QP ci does not.
This is causing incorrect engine calculation for encqueued WQ values
(wq->pi - wq->ci) and eventually the device stops accepting new enqueue
operations.
Fixed by removing the wraparound on QP pi and using a temp calculation
where wraparound values are needed.
Fixes: 8e196c08ab ("crypto/mlx5: support enqueue/dequeue operations")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Replace pending queue with one that allows concurrent single producer and
single consumer. This relaxes the restriction of only allowing a single
lcore to operate on a given queue pair.
Signed-off-by: David George <david.george@sophos.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
When VM size is larger than 4G (u32) and memory region is larger than 4G,
the 32-bit GCD function overflowed and returned wrong value
that resulted in memory registration failure.
This patch calls 64-bit GCD function to avoid overflow.
Fixes: cc07a42da2 ("vdpa/mlx5: prepare memory regions")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Matan Azrad <matan@nvidia.com>
These APIs were introduced in 19.02, therefore removing
experimental tag to promote them to stable state.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Remove experimental tag from internal API dpaa2_seqn.
This API was introduced in DPDK 20.11 and is now moved to
internal tag.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This API was introduced in 19.08, therefore removing
experimental tag to promote them to stable state.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Remove experimental tag from internal API dpaa_seqn.
This API was introduced in DPDK 20.11 and is now moved to
internal tag.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
On older CPUs, currently numa_node returns value only for socket 0.
Instead, application should be able to make correct decision and
also to keep consistent with the Linux code,
replace the return value to -1.
Fixes: ac7c98d04f ("bus/pci: ignore missing NUMA node on Windows")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Some docs and comments in Meson files are still mentioning
the old build system based on "make", removed in 20.11.
After one year, such references are better to be removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
In RegEx device probing, there is register read trying after context
device creation.
When the reading fails, the context device was not freed what caused a
memory leak.
Free it.
Fixes: f324162e8e ("regex/mlx5: support combined rule file")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds more dummy packet types for QinQ packet,
it enables tcp/udp layer of ipv4/ipv6 for QinQ payload,
so we can use L4 dst/src port as input set for switch
filter.
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
During the port probe process, there are two abnormal branches that did
not release the previously requested memory, resulting in leakage. The
patch adds an iavf_uninit_vf function, which corresponds to the
iavf_init_vf function.
Fixes: ff2d0c345c ("net/iavf: support generic flow API")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The RTE_ALIGN macro is aligned upwards. If the buf_size variable is not
aligned with 1 << I40E_RXQ_CTX_DBUFF_SHIFT, the rx_buf_len is larger than
the actual mbuf memory after the operation. When receiving the packet, if
the packet is larger than the configured buf_size, it will cause a memory
stepping event.
The patch uses the RTE_ALIGN_FLOOR down alignment macro to correct the
problem.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the i40e_init_arq function, when the i40e_config_arq_regs function
returns from processing failure, the previously applied arq_bufs resource
is not released, which leads to leakage.
The patch is processed in the same way as the i40e_init_asq function,
maintaining a unified coding style.
Fixes: 49ea51605b ("net/i40e/base: gracefully clean the resources")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A local test found that repeated port start and stop operations during
the continuous SSE vector bufflist receiving process will cause the mbuf
resource to run out. The final positioning is when the port is stopped,
the mbuf of the pkt_first_seg pointer is not released. Resources leak.
The patch scheme is to judge whether the pointer is empty when the port
is stopped, and release the corresponding mbuf if it is not empty.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If DCF representor port is closed after DCF port is closed, there will
be segmentation fault because representor accesses the released resource
of DCF port.
This patch checks if the resource is present before accessing.
Fixes: 5674465a32 ("net/ice: add DCF VLAN handling")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
In original implementation, if DCF is created on PF1, the PF ID is
still 0, but not 1. Without the right PF ID, the ACL will not work.
This patch makes VF to get its parent's physical function ID.
Fixes: 0b02c95194 ("net/ice: handle PF initialization by DCF")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
In the eth_i40e_dev_init function, the tunnel and ethertype hash table
resource release interface should be rte_hash_free instead of rte_free,
and the previously registered interrupt handling function also needs to
be removed from the interrupt list. The patch is amended to use the
correct interface to release the hash table resource and release the
interrupt handling function at the same time.
Fixes: 425c3325f0 ("net/i40e: store tunnel filter")
Fixes: 5c53c82c81 ("net/i40e: store flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A local test found that repeated port start and stop operations during
the continuous SSE vector bufflist receiving process will cause the mbuf
resource to run out. The final positioning is when the port is stopped,
the mbuf of the pkt_first_seg pointer is not released. Resources leak.
The patch scheme is to judge whether the pointer is empty when the port
is stopped, and release the corresponding mbuf if it is not empty.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The VIRTCHNL_OP_QUERY_FDIR_FILTER opcode is not used, so remove it.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add TCP/UDP/SCTP header checksum field selectors, they can be used in
creating FDIR or RSS rules related to TCP/UDP/SCTP header checksum.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The QFI is 6-bit "QoS Flow Identifier" within the GTPU Extension Header.
Add virtchnl fields QFI of GTPU UL/DL for supporting the AVF FDIR.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Update MTU value based on PTP enable status and reserve eight
bytes in TX path to accommodate VLAN tags.
If PTP is enabled maximum allowed MTU is 9200 otherwise it's 9208.
Fixes: b5dc314044 ("net/octeontx2: support base PTP")
Cc: stable@dpdk.org
Signed-off-by: Hanumanth Reddy Pothula <hpothula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding a new callback for reading the link status. PF can read its
link status and can forward the same to VF once it comes up.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently link event is only sent to the PF by AF as soon as it comes
up, or in case of any physical change in link. PF will broadcast
these link events to all its VFs as soon as it receives it.
But no event is sent when a new VF comes up, hence it will not have
the link status.
Adding support for sending link status to the VF once it comes up
successfully.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add ROC API to configure dual VLAN tag addition and removal.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since the addition of support for runtime queue setup,
receive queues that are started by default no longer
have the correct state. Fix this by setting the state
when a port is started.
Fixes: 0105ea1296 ("net/bnxt: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
The RSS expansion is based on DFS algorithm to traverse over the possible
expansion paths.
The current implementation breaks out, if it reaches the terminator of
the "next nodes" array, instead of going backwards to try the next path.
For example:
testpmd> flow create 0 ingress pattern eth / ipv6 / udp / vxlan / end
actions rss level 2 types tcp end / end
The paths found are:
ETH IPV6 UDP VXLAN END
ETH IPV6 UDP VXLAN ETH IPV4 TCP END
ETH IPV6 UDP VXLAN ETH IPV6 TCP END
The traversal stopped after getting to the terminator of the next nodes
of the ETH node. It missed the rest of the nodes in the next nodes array
of the VXLAN node.
The fix is to go backwards when reaching the terminator of the current
level and find if there is a "next node" to start traversing a new path.
Using the above example, the flows will be:
ETH IPV6 UDP VXLAN END
ETH IPV6 UDP VXLAN ETH IPV4 TCP END
ETH IPV6 UDP VXLAN ETH IPV6 TCP END
ETH IPV6 UDP VXLAN IPV4 TCP END
ETH IPV6 UDP VXLAN IPV6 TCP END
The traversal will find additional paths, because it traverses through
all the next nodes array of the VXLAN node.
Fixes: 4ed05fcd44 ("ethdev: add flow API to expand RSS flows")
Cc: stable@dpdk.org
Signed-off-by: Lior Margalit <lmargalit@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The RSS expansion algorithm is using a graph to find the possible
expansion paths. A graph node with the 'explicit' flag will be skipped,
if it is not found in the flow pattern.
The current implementation misses the case where the node with the
explicit flag is in the middle of the expanded path.
For example:
testpmd> flow create 0 ingress pattern eth / ipv6 / udp / vxlan / end
actions rss level 2 types tcp end / end
The VLAN node has the explicit flag, so it is currently included in the
expanded flow:
ETH IPV6 UDP VXLAN END
ETH IPV6 UDP VXLAN ETH VLAN IPV4 TCP END
ETH IPV6 UDP VXLAN ETH VLAN IPV6 TCP END
The fix is to skip the nodes with the explicit flag while iterating over
the possible expansion paths. Using the above example, the flows will be:
ETH IPV6 UDP VXLAN END
ETH IPV6 UDP VXLAN ETH IPV4 TCP END
ETH IPV6 UDP VXLAN ETH IPV6 TCP END
Fixes: 3f02c7ff68 ("net/mlx5: fix RSS expansion for inner tunnel VLAN")
Cc: stable@dpdk.org
Signed-off-by: Lior Margalit <lmargalit@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Use max-pkt-len only if jumbo frames offload is requested
since otherwise this field isn't valid.
Fixes: 8b90e43581 ("net/virtio: set offload flag for jumbo frames")
Fixes: 4e8169eb0d ("net/virtio: fix Rx scatter offload")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When virtio_init_queue returns error, the memory of vq is freed.
But the value of hw->vqs[queue_idx] does not restore.
If virtio_init_queue returns error, the memory of vq is freed again
in virtio_free_queues.
Fixes: 69c80d4ef8 ("net/virtio: allocate queue at init stage")
Cc: stable@dpdk.org
Signed-off-by: Gaoxiang Liu <liugaoxiang@huawei.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The callfds[] array stores eventfds sequentially for Rx and Tx vq.
Fixes: 3d4fb6fd25 ("net/virtio-user: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
There is no reason to re-register a interrupt handler for LSC if this
feature was not requested in the first place.
A simple use case is when asking for Rx interrupts without LSC interrupt.
Fixes: 26b683b4f7 ("net/virtio: setup Rx queue interrupts")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Report max/min/align descriptors limits in device info get callback.
Before calling the callback, rte_eth_dev_info_get() provides
default values of nb_min as zero and nb_max as UINT16_MAX that are
not correct for the driver, so one can't rely on them.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Descriptors number may be set less than queue size for split queue
vectorized Rx path. Pointers to mbufs for received packets are
obtained from SW ring, that is initially filled with them in the end
of queue setup in virtio_dev_rx_queue_setup_finish(). The begin of the
SW ring filled up to the size of descriptors number. At queue size
offset from the begin of the SW ring pointers to some fake mbuf are also
set for wrapping purpose. So the ring may contains the hole of invalid
pointers from descriptors number offset to queue size offset, and split
vectorized Rx routines could write to the invalid addresses since they
use the ring up to the queue size. Fix this by setting descriptors
number to queue size on Rx queue setup.
Fixes: fc3d66212f ("virtio: add vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Rx queue setup callback allows to use the whole ring when
descriptor number argument equals zero. There's no point to
handle zero in any way since RTE Rx queue setup function
rte_eth_rx_queue_setup() doesn't pass zero using fallback
values.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Rx queue setup finish function may report wrong number of
allocated mbufs in case of in-order feature. Fix the
function to not ignore allocation error and count only
successfully allocated number of buffers.
Fixes: e5f456a98d ("net/virtio: support in-order Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This API was introduced in 18.08, therefore removing
experimental tag to promote it to stable state.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Error occurs when configuring meson with --buildtype=minsize
with GCC 11.1.0:
drivers/vdpa/mlx5/mlx5_vdpa_mem.c: In function ‘mlx5_vdpa_mem_register’:
drivers/vdpa/mlx5/mlx5_vdpa_mem.c:183:24: error:
initialization of ‘uint64_t’ {aka ‘long unsigned int’} from ‘void *’
makes integer from pointer without a cast [-Werror=int-conversion]
| uint64_t gcd = NULL;
| ^~~~
drivers/vdpa/mlx5/mlx5_vdpa_mem.c:244:75: error:
‘mode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
| klm_size = mode == MLX5_MKC_ACCESS_MODE_KLM ?
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| KLM_SIZE_MAX_ALIGN(empty_region_sz) : gcd;
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@nvidia.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Error occurs when configuring meson with --buildtype=minsize
with GCC 11.1.0:
drivers/regex/mlx5/mlx5_regex_fastpath.c:398:17: error:
‘len’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
| complete_umr_wqe(qp, sq, &qp->jobs[mkey_job_id], sq->pi,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| klm_num, len);
| ~~~~~~~~~~~~~
drivers/regex/mlx5/mlx5_regex_fastpath.c:315:31: note: ‘len’ was declared here
| uint32_t klm_num = 0, len;
| ^~~
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Error occurs when configuring meson with --buildtype=minsize
with GCC 11.1.0:
In function ‘__internal_ram_wr_relaxed’,
inlined from ‘internal_ram_wr’ at ecore_int_api.h:166:2,
inlined from ‘qede_update_rx_prod.constprop’ at qede_rxtx.c:736:2:
drivers/net/qede/base/bcm_osal.h:136:9: error:
‘rx_prods’ is used uninitialized [-Werror=uninitialized]
| rte_write32_relaxed((_val), (_reg_addr))
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ecore_int_api.h:151:17: note: in expansion of macro ‘DIRECT_REG_WR_RELAXED’
| DIRECT_REG_WR_RELAXED(p_hwfn, &((u32 OSAL_IOMEM *)addr)[i],
| ^~~~~~~~~~~~~~~~~~~~~
drivers/net/qede/qede_rxtx.c: In function ‘qede_update_rx_prod.constprop’:
drivers/net/qede/qede_rxtx.c:724:33: note: ‘rx_prods’ declared here
| struct eth_rx_prod_data rx_prods = { 0 };
| ^~~~~~~~
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
The PCI and vdev bus drivers cannot be disabled for DPDK builds and
special logic is put in place to not skip them when they are specified
in the disable list. This logic is broken though, as the inclusion of
the driver-specific meson.build file is only included in the "else" leg
of the condition check. This means that when they are specified as
disabled the PCI and vdev buses are not disabled, but neither are their
source files compiled.
Fix this by moving the "subdir()" call into the next "if build" block,
ensuring that if not disabled the sources are always included. To take
account of the fact that the subdir call could itself disable the
driver, we add a break call into the following loop to ensure we quickly
fall through to the following block which stops processing appropriately
if the driver is disabled.
Fixes: 2e33309ebe ("config: enable/disable drivers in Arm builds")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Apply the same fix that for iavf to DCF
commit ead06572bd ("net/iavf: fix performance with writeback policy")
Fixes: 4b0d391f0e ("net/ice: add queue config in DCF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Lijuan Tu <lijuan.tu@intel.com>
A local test found that repeated port start and stop operations during
the continuous SSE vector bufflist receiving process will cause the mbuf
resource to run out. The final positioning is when the port is stopped,
the mbuf of the pkt_first_seg pointer is not released. Resources leak.
The patch scheme is to judge whether the pointer is empty when the port
is stopped, and release the corresponding mbuf if it is not empty.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
In the eth_ixgbevf_dev_init and eth_ixgbe_dev_init functions, memory is
allocated for the MAC address, and the address is stored in the
eth_dev->data->mac_addrs member variable. If the subsequent function is
abnormal, you need to use the rte_free function to release the MAC
address memory.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
In the ixgbevf_dev_start function, after initializing the rxtx queue, if
an exception occurs in the subsequent function, the rxtx queue needs to
be released. The patch solves the problem of queue resource leakage.
Fixes: 0eb609239e ("ixgbe: enable Rx queue interrupts for PF and VF")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
In the ixgbe_fdir_filter_init and ixgbe_l2_tn_filter_init functions,
after the hash handle is created, the handle is not released in
subsequent abnormal branches.
Fixes: 080e3c0ee9 ("net/ixgbe: store flow director filter")
Fixes: d0c0c416ef ("net/ixgbe: store L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
DCF PMD needs to support rte_eth_dev_reset, the reason is when a DCF
instance is killed, all the flow rules still exists in hardware, when
DCF gets to reconnect, it already lost the flow context, and if the
application wants to create new rules, it may fail due to firmware
reports rules already exist.
The rte_eth_dev_reset API provides a more elegant way for the
application to reset DCF when reconnect happens.
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
According to flow action MARK definition, PMDs must set both
PKT_RX_FDIR and PKT_RX_FDIR_ID if the packet contains a mark.
Fixes: 1aacc3d388 ("net/sfc: support user mark and flag Rx for EF100")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
This patch fixes Tx push capability to be compatible with Kunpeng 920,
as Tx push is only supported on Kunpeng 930.
Fixes: 23e317dd1f ("net/hns3: support Tx push quick doorbell for performance")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This new taskqueue pair reset command is used incorrectly, resulting in
the new command not taking effect.
This patch fixes the incorrect use.
Fixes: 6911e7c22c ("net/hns3: fix long task queue pairs reset time")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The used_rx_queues only takes effect after device is started, and
its value is incorrect before the device is started. Therefore, it
is not suitable for flow action to use it to verify the queue index
before the device is started.
E.g. Enable dedicated queue in bonding device will configure a queue
flow action before start its slave devices. The above problem will
make this reasonable flow action configuration fail.
This patch use the nb_rx_queues from the configuration phase to
achieve verification.
Fixes: a951c1ed3a ("net/hns3: support different numbers of Rx and Tx queues")
Fixes: f8e7fcbfd0 ("net/hns3: support flow action of queue region")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
In the receiving direction, if alloc mbuf or jumbo process failed, there
is no err_pkts count, which makes it difficult to locate the problem.
Because alloc mbuf failed, the rx_nombuf field is counted.
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When the port is probed, if the eth_from_pcaps function fails, the
previously opened pcap resources are not released, causing resource
leakage.
The patch solves the problem of resource leakage caused by abnormal
branch exit during the port probe process.
Fixes: 4c173302c3 ("pcap: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The lock pdata->i2c_mutex is not released if the function return in
these two patched branches, which may lead to deadlock problem if
this lock is acquired again.
Bugzilla ID: 777
Fixes: 4ac7516b8b ("net/axgbe: add phy init and related APIs")
Cc: stable@dpdk.org
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Call xsk_ring_prod__submit() before kick_tx() so that the kernel
consumer sees the updated state of Tx ring. Otherwise, Tx packets are
stuck in the ring until the next call to af_xdp_tx_zc().
Fixes: d8a210774e ("net/af_xdp: support unaligned umem chunks")
Cc: stable@dpdk.org
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Ciara Loftus <ciara.loftus@intel.com>
After commit "d68249f88266", driver allocates ring groups in
bnxt_alloc_hwrm_rx_ring(). But during port start, driver invokes
bnxt_alloc_hwrm_rx_ring() followed by bnxt_alloc_all_hwrm_ring_grps().
This will cause the FW command failure in bnxt_alloc_all_hwrm_ring_grps()
To fix this, just don't create the ring group if it is already created.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Added an invalid fw_grp_id check inside bnxt_hwrm_ring_grp_free().
This will prevent invalid fw_grp_id to be passed to the FW which can
result in an error.
This fixes the following failure in the "port stop" -> "port start"
sequence:
bnxt_hwrm_ring_grp_free(): error 2:0:00000000:0204
bnxt_hwrm_ring_grp_free(): error 2:0:00000000:0204
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
VLAN offload capability may be disabled in the FW. The driver
should not attempt to override or utilize this feature in such
scenarios since it will not work as expected.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In the scalar Rx path, for the VLAN packet, TCI is not saved in
the "mbuf->vlan_tci", however the STRIPPED offload flag is set
along with PKT_RX_VLAN flag.
Fixes: c1b33d4031 ("net/bnxt: use table based mbuf flags handling")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In the implementation of the VF driver ixgbevf_update_stats to obtain
statistics, the multicast count hw_stats->vfmprc has been obtained,
but it is not cleared in the corresponding ixgbevf_dev_stats_reset
interface.
Fixes: abf7275bba ("ixgbe: move to drivers/net/")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The len variable, used in the computation of max_pkt_len could
overflow, if used to store the result of the following computation:
rxq->rx_buf_len * IAVF_MAX_CHAINED_RX_BUFFERS
Since, we could define the mbuf size to have a large value (i.e 13312),
and IAVF_MAX_CHAINED_RX_BUFFERS is defined as 5, the computation
mentioned above could potentially result in a value which might be
bigger than MAX_USHORT.
The result will be that Jumbo Frames will not work properly
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Tudor Cornea <tudor.cornea@gmail.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When DCF configures rx_queues, it may cause the pointer of
rx_queues to go out of bounds.
This patch expands the scope of the judgment condition to
fix this issue.
Fixes: 4b0d391f0e ("net/ice: add queue config in DCF")
Cc: stable@dpdk.org
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Default case of the switch statement causes deadlock because it returns
without unlocking the 'flow_ops_lock' lock. Fixing it.
Fixes: 0d6ef740e4 ("net/ice: support flow ops thread safe")
Cc: stable@dpdk.org
Signed-off-by: Yu Wenjun <yuwenjun0x@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Previously, hash value is calculated by src IP address, dst IP address
and IP ID. However, default RSS field only needs src and dst IP address.
This patch removes IP ID from default RSS field for IP fragment packets
to improve default RSS configuration.
Fixes: 4027fffe86 ("net/ice: support default RSS for IP fragment packet")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Previously, hash value is calculated by src IP address, dst IP address
and IP ID. However, default RSS field only needs src and dst IP address.
This patch removes IP ID from default RSS field for IP fragment packets
to improve default RSS configuration.
Fixes: 9e29a278bc ("net/iavf: support default RSS for IP fragment")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds L3 fields FDIR support for IPv6 fragment packets.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Originally, the value of field_selector for IPV4_FRAG header hdr1 is
the same as the previous header hdr2. For IPv4 packets, field_selector
for hdr2 can be any value between 0 and 4, depending on the selected
field. Actually, this value for IPV4_FRAG should be constant 0,
which denotes the field packet ID.
This patch adds an assignment to hdr1->field_selector to make sure that
it is always 0.
Fixes: 3334513ef4 ("net/iavf: support flow director for IP fragment")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Since DPDK 20.11 the default rxdid is changed from 16 to 22, but the
DCF data path didn't change, the patch fix the gap.
Fixes: 12443386a0 ("net/ice: support flex Rx descriptor RxDID22")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
When flow engine initialization or FXP resource reset failed, it needs
to free the memory zone and unregister the interrupt callback.
Bugzilla ID: 752
Fixes: 84dc7a95a2 ("net/ice: enable flow director engine")
Fixes: 7615a68950 ("net/ice: rework for generic flow enabling")
Fixes: 7edc7158d7 ("net/ice: cleanup RSS/FDIR profile on device init")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The NFP4000/6000 supports a minimum of 256 Tx/Rx descriptors and not 64.
Before this patch when a DPDK application configured < 256 Tx
descriptors the hardware read/write pointers would be unmasked and not
wrapped at the expected size of the ring. The PMD logic to determine the
amount of free space in the Tx ring is incompatible with the unmasked
hwqueue pointers and this will result in the PMD not updating the
read pointer at all.The knock-on effect is that under high load the
PMD will potentially re-use a Tx descriptor before the hw has had a
chance to process that particular descriptor. This issue can manifest as
a DMA error when the hardware tries to perform a DMA with info from a
partially populated descriptor.
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
'ipn3ke_bridge_func' is a global variable and it used in net & raw
drivers.
It's only used for drivers, so change it from EXPERIMENTAL to INTERNAL.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This patch add PDCP security short MAC-I support for
dpaa_sec driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
To support short MAC-I, integrity only case is required
to be supported for PDCP.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
ATTACH_RESOURCES mailbox for CPT LFs is being called without
setting modify bit. Because of this previously attached NPA LF
to the CPT VF is getting removed, when only CPT VF is whitelisted.
This patch fixes the same.
Fixes: c045d2e5cb ("common/cnxk: add CPT configuration")
Cc: stable@dpdk.org
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch add support to also counter err pkt counter per queue.
This also enhances few related debug prints.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch improve storage and performance by force inline
of the keys.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The logic was incorrectly doing conditional swap. It need to
be bit swap always.
Fixes: 73a24060cd ("crypto/dpaa2_sec: add sample PDCP descriptor APIs")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The space in descriptor buffer is scarce as it is limited to
64 words for platforms except ERA10 (which has 128).
As the descriptors are processed with QI, it adds some words
to the descriptor which is passed.
Some descriptors used for SDAP were using too much words reaching
the limit.
This patch reduces the number of words used by removing the inlining
of some keys (done for performance) in order to have working
descriptors.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For SDAP, we are not using the protocol operation to perform
4G/LTE operation so the DPOVRD option is not used.
Removing it save some space in the descriptor buffer and
execution time.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The offset of the HFN word and Bearer/Dir word is different
depending on type of PDB.
The wrong value was used.
This patch address this issue
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch adds support for AES_CMAC integrity
in non-security mode.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
add DES-CBC support and enable available cipher-only
test cases.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The rte_cryptodev_pmd.* files are for drivers only and should be
private to DPDK, and not installed for app use.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The API rte_cryptodev_pmd_is_valid_dev, can be used
by the application as well as PMD to check whether
the device is valid or not. Hence, _pmd is removed
from the API.
The applications and drivers which use this API are
also updated.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Update min tailroom to reflect IPsec additions.
PMD crypto_cn9k & crypto_cn10k would have packet
grow into tailroom post IPsec processing.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
When given a source length 0 for CCM, the encryption and decryption
functions did not call the EVP_ENCRYPTUPDATE/EVP_DECRYPTUPDATE functions
with a src and dst, causing some FIPS validation failures for testcases
with PLen=0:
process_openssl_auth_encryption_ccm() line 1131:
Process openssl auth encryption ccm failed
Fixes: 1a4998dc4d ("crypto/openssl: support AES-CCM")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Submit two instructions with one LMTST operation.
Also updated dequeue path to have local var for constants.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Swap is not required for ZUC. Update IV updation
sequence to remove the redundant swap in case of ZUC.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The opcode for encryption & decryption is the
same and single routine would be able to handle
both encryption and decryption operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for ZUC API change in ucode 1.13
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch adds support for the timestamp format settings for
the receive and send queues. If the firmware version x.30.1000
or above is installed and the NIC timestamps are configured
with the real-time format, the default zero values for newly
added fields cause the queue creation to fail.
The patch queries the timestamp formats supported by the hardware
and sets the configuration values in queue context accordingly.
Fixes: 6152534e21 ("crypto/mlx5: support queue pairs operations")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Added flow control based check to determine CPT IQ is full.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added a common macro to set eventdev enqueue and
dequeue operations to reduce code.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
CPT can be told to submit events to SSO upon completion.
Crypto adapter uses this feature and the new flag can be
used to optimize receive path in those cases.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Use otx2_mbox_memcpy() instead of memcpy() to prevent unaligned access.
Fixes: a0645ed0d6 ("crypto/octeontx2: discover capabilities")
Cc: stable@dpdk.org
Signed-off-by: Danny Patel <dannyp@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
The QP setup function allocates buffer for its
opaque MR and register it into MR structure.
After buffer allocation and before MR registration,
it tries allocate MR Btree.
When the MR Btree allocation fails, the buffer was
not freed what caused a memory leak.
Allocate the MR Btree before buffer alloction.
Fixes: 0165bccdb4 ("compress/mlx5: add memory region management")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
IPsec verify functions can be made common which can
be used for both cn9k and cn10k
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Adding functions for hash generation that can be used
in hmac opad/ipad calculation.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For device probe and iterator, devargs name was key information,
parsed by rte_devargs_parse. In legacy parser, devargs name was
extracted after bus name:
bus:name,kv_arguments,,,
Example:
pci:83:00.0,arguments,...
vdev:pcap0,...
To be compatible with legacy parser, this patch introduces new
bus driver API devargs_parse to parse devargs and update devargs name.
If devargs_parse not implemented by bus driver, the new syntax parser
rte_devargs_layers_parse default will resolve devargs name from bus's
"name" argument.
Different bus driver might choose different keys from arguments with
unified format. The PCI bus implementation fills the devargs name with
the "addr" argument, example:
-a bus=pci,addr=83:00.0/class=eth/driver=mlx5,...
name: 0000:03:00.0
-a bus=vdev,name=pcap0/class=eth/driver=pcap,...
name:pcap0
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
During port stop/start sequence the Thor FW is returning an error.
This is because we are deriving incorrect active Rx ring and using
that wrong information in the bnxt_vnic_rss_cfg HWRM command.
Fix it by using the rx_queue_state from eth_dev.
Fixes: 0105ea1296 ("net/bnxt: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
On chips like Thor, port stop/start sequence could result in a crash
in the application. This is because of false detection of a bad
opaque in the Rx completion and the subsequent kicking-in of the ring
reset code to recover from the condition.
The root cause being that the port stop/start would result in the HW
starting with fresh values, while the driver internal tracker variable
`rx_next_cons` is still pointing to a stale value.
Fix this by resetting rx_next_cons to 0 in bnxt_init_one_rx_ring()
Fixes: 03c8f2fe11 ("net/bnxt: detect bad opaque in Rx completion")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The GENEVE TLV option matching is done using a flex parser.
Recent update in firmware, requires that in order to match on the
GENEVE TLV option the "geneve_tlv_option_0_exist" bit should be set.
Add the new "geneve_tlv_option_0_exist" setting when translating the
GENEVE TLV option item.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
A Rx ring stop start sequence may result in the FW returning
a different set of Rx ring and AGG ring IDs. If the ring group
is not updated with the new IDs, the HW sees the host driver using
incorrect BD types for the Rx ring and AGG ring. This can cause
the chip to go into a bad state or encounter RE_flush issue
or leak mbufs in the HW.
Fix this by issuing a bnxt_hwrm_ring_grp_free() and an
bnxt_hwrm_ring_grp_alloc() to refresh the ring group information.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
When an ETH or VLAN flow item directly preceding ECPRI (i. e. a pattern
for eCPRI over Ethernet) did not specify the eCPRI protocol, matches
were not restricted to eCPRI traffic. For example, "eth / ecpri / end"
pattern behaved as "eth / end". Implicitly add Ethernet type condition,
so that "eth / ecpri / end" behaves as "eth type is 0xAEFE / end".
Fixes: daa38a8924 ("net/mlx5: add flow translation of eCPRI header")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
A core dump is being generated with the following call stack:
0 _mm256_storeu_si256 (__A=..., __P=0x80)
1 rte_mov32 (src=0x2299c9140 "", dst=0x80)
2 rte_memcpy_aligned (n=60, src=0x2299c9140, dst=0x80)
3 rte_memcpy (n=60, src=0x2299c9140, dst=0x80)
4 mprq_buf_to_pkt (strd_cnt=1, strd_idx=0, buf=0x2299c8a00, len=60,
pkt=0x18345f0c0, rxq=0x18345ef40)
5 rxq_copy_mprq_mbuf_v (rxq=0x18345ef40, pkts=0x7f76e0ff6d18, pkts_n=5)
6 rxq_burst_mprq_v (rxq=0x18345ef40, pkts=0x7f76e0ff6d18, pkts_n=46,
err=0x7f76e0ff6a28, no_cq=0x7f76e0ff6a27)
7 mlx5_rx_burst_mprq_vec (dpdk_rxq=0x18345ef40, pkts=0x7f76e0ff6a88,
pkts_n=128)
8 rte_eth_rx_burst (nb_pkts=128, rx_pkts=0x7f76e0ff6a88,
queue_id=<optimized out>, port_id=<optimized out>)
This crash is caused by an attempt to copy previously uncompressed CQEs
into non-allocated mbufs. There is a check to make sure we only use
allocated mbufs in the rxq_burst_mprq_v() function, but it is done only
before the main processing loop. Leftovers of compressed CQEs session are
handled before that loop and may lead to the mbufs overflow as seen.
Move the check for replenished mbufs up to protect uncompressed CQEs
session leftovers from accessing non-allocated mbufs after the
mlx5_rx_mprq_replenish_bulk_mbuf() function is invoked.
Bugzilla ID: 746
Fixes: 0f20acbf5e ("net/mlx5: implement vectorized MPRQ burst")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The RSS expansion algorithm is using a graph to find the possible
expansion paths. The VLAN item in the flow pattern requires special
treatment, because it should not be added implicitly by the expansion
algorithm. If the flow pattern ends with ETH item, the pattern will be
expanded with IPv4 and IPv6.
For example:
testpmd> flow create ... eth / end actions rss / end
ETH END
ETH IPV4 END
ETH IPV6 END
If a VLAN item follows the ETH item in the flow pattern, the pattern
will be expanded with IPv4 and IPv6 following the VLAN item.
For example:
testpmd> flow create ... eth / vlan / end actions rss level 1 / end
ETH VLAN END
ETH VLAN IPV4 END
ETH VLAN IPV6 END
The case of inner tunnel VLAN item was not taken care of so the flow
pattern did not expand with IPv6 and IPv4 as expected.
Example with inner VLAN:
testpmd> flow create ... / vxlan / eth / vlan / end actions rss level 2
/ end
The current result of the expansion alg:
ETH IPV6 UDP VXLAN ETH VLAN END
The expected result of the expansion alg:
ETH IPV6 UDP VXLAN ETH VLAN END
ETH IPV6 UDP VXLAN ETH VLAN IPV4 END
ETH IPV6 UDP VXLAN ETH VLAN IPV6 END
The fix is to introduce a new flag to set on a graph expansion node
to apply the 'explicit' behavior, meaning the node is not added to
the expanded pattern, if it is not found in the flow pattern, but the
expansion alg can go deeper to its next nodes.
Fixes: c7870bfe09 ("ethdev: move RSS expansion code to mlx5 driver")
Cc: stable@dpdk.org
Signed-off-by: Lior Margalit <lmargalit@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Remove bit reverse for TCP/UDP port mask, since it causes the flows with
some TCP/UDP ports to disobey the flow director rules.
Fixes: ea230dda16 ("net/txgbe: configure flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
When device is stopped, the port status is not changed and only the Tx
laser is turned off by hardware design.
Fixes: 0c061eadec ("net/txgbe: add link status change")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Rename the nfp_net.c file to nfp_common as it now contains functions
common to VF and PF functionality. Rename the header file too to be
consistent. Also remove the "net" naming from the _ctrl and _logs files
for consistency across the PMD.
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Similar to the last commit, this changeset moves all the PF specific
functions to a new file called nfp_ethdev.c.
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Move any ethdev functionality specific to VF devices into a new file
called nfp_ethdev_vf.c.
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
The majority of "ethdev" type functions are used for both PF devices and
VF devices. Prototype these functions in the nfp_net_pmd header file in
preparation of splitting PF and VF specific functions.
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
This commit moves the CPP bridge logic to a separate file. A new
corresponding header file is also created.
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Create a new rxtx file and move the Rx/Tx functions to this file. This
commit will also move the needed shared functions to the nfp_net_pmd.h
file as needed.
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
This change splits out the rx/tx specific structs and defines from the
main nfp_net_pmd header file and into their own header file.
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
This patch adds set link up/down feature. RxTx datapath and link status
will be disabled when dev_set_link_down() is called, and can be enabled by
dev_start() or dev_set_link_up().
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, hns3 PMD has supported start/stop RxTx datapath request message
between the primary and secondary processes. However, there are some cases
only to start/stop Tx datapath. This patch adds start/stop Tx datapath
request for MP.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Logging should be converted to dynamic log.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
The memory size of bandwidth config parameters is not set correctly in
memory copy process, which leads to the wrong values. This patch fixed
the size to the correct value.
Fixes: 3a6bfc37ea ("net/ice: support QoS config VF bandwidth in DCF")
Cc: stable@dpdk.org
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
