The outer vlan should be copied from source packet buffer to
support double vlan stripping and insertion, as double vlan can be
stripped or inserted by some of NIC hardware.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch simply applies the transform previously committed in
scripts/cocci/mtod-offset.cocci. No other modifications have been
made here.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add the encapsulation and decapsulation options.
The two flags are enabled by default.
Sometimes we want to know the performance influence of
the encapsulation and decapsulation operations, and
I think we should add the two configuration options.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Add the bad Rx checksum statistics of inner IP and L4.
The number of packets with bad RX IP and L4 checksum in inner header is recorded.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Add the tso-segsz option for TSO offload.
If the 'tso-segsz' is not 0, it means TSO offload is enabled.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Add Tx checksum offload configuration for inner header.
For UDP tunneling packet, the inner Tx checksum offload means
inner IPv4 and inner L4(TCP/UDP/SCTP).
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Add the filter types for VXLAN packet.
The following filter type are added here.
- Inner MAC&VLAN and tenant ID
- Inner MAC and tenent ID, and Outer MAC
- Inner MAC and tenant ID
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Implement the VXLAN packet processing functions.
- VXLAN port configuration
- VXLAN tunnel setup
- VXLAN tunnel destroying
- VXLAN packet processing for Rx side
- VXLAN packet processing for Tx side
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
Add the common APIs of tunneling packet processing.
We are trying to create a framework for tunneling packet processing, which includes
- Tunnel port configuration
- Tunnel setup
- Tunnel destroying
- Tunneling packet processing for Rx side
- Tunneling packet processing for Tx side
- Tunnel parameter processing
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
Add some basic VXLAN definitions in vxlan.h file.
It includes VXLAN port information and VXLAN device structures.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
This patch creates the virtio devices management mechanism.
These functions are from the vHost example, which include:
- virtio device creation.
- virtio device destroying.
- virtio device maintenance.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
[Thomas: remove unused function validate_nb_devices()]
[Thomas: add maintainers section]
The macro to turn on additional debug output when the app was compiled
with "-DDEBUG" was missing a ";".
Fixes: 07db4a9750 ("examples/distributor: new sample app")
Signed-off-by: Anbarasan Murugesan <anbarasanx.murugesan@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is a modification of qos_sched example to use
librte_cfgfile for parsing configuration file.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add a command-line parameter to l3fwd, to allow the user to specify the
destination mac address for each ethernet port used.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Do not compile these examples if the related dpdk option is not
enabled, as it's done for other examples. It allows to build
the examples directory with a reduced dpdk configuration.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Fix a cast issue:
examples/netmap_compat/lib/compat_netmap.c:827:10: error: cast to
pointer from integer of different size [-Werror=int-to-pointer-cast]
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Fix the following compilation error:
examples/bond/main.c:717:1: error: control reaches end of
non-void function [-Werror,-Wreturn-type]
The prompt() function does not return anything, so fix its prototype
to be void.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This error is detected:
examples/ip_pipeline/cmdline.c:272:15: error: address of array
'params->file_path' will always evaluate to 'true'
if (!params->file_path) {
~~~~~~~~~^~~~~~~~~
file_path is an array in a structure so it's unneeded to check it.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Minor fix for the referring of a pointer when debug and dump is enabled.
Fixes: 72ec8d77ac ("examples/vhost: rework duplicated code")
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a new priv_size field in mbuf structure that should
be initialized at mbuf pool creation. This field contains the
size of the application private data in mbufs.
Introduce new static inline functions rte_mbuf_from_indirect()
and rte_mbuf_to_baddr() to replace the existing macros, which
take the private size in account when attaching and detaching
mbufs.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The mbuf pool private area must always be populated in a mbuf pool.
The applications or drivers may expect that for a mbuf pool, the mbuf
pool private area (mbuf_data_room_size and mbuf_priv_size) are
properly filled.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Deduct the mbuf data room size from mempool->elt_size and priv_size,
instead of using an hardcoded value that is not related to the real
buffer size.
To use rte_pktmbuf_pool_init(), the user can either:
- give a NULL parameter to rte_pktmbuf_pool_init(): in this case, the
private size is assumed to be 0, and the room size is
mp->elt_size - sizeof(struct rte_mbuf).
- give the rte_pktmbuf_pool_private filled with appropriate
data_room_size and priv_size values.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
rte_free handles getting passed a NULL pointer.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Added a parameter to the RX callback to pass in the number of
available RX packets in addition to the number of dequeued packets.
This provides the RX callback functions with additional information
that can be used to decide how packets from a burst are handled.
The TX callback doesn't require this additional parameter so the RX
and TX callbacks no longer have the same function parameters. As such
the single RX/TX callback has been refactored into two separate callbacks.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Minor refactoring and comments to make the sample app and
code examples clearer for the sample app guide.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Previous vhost implementation wrongly name kickfd as callfd and callfd as kickfd.
It is functional correct, but causes confusion.
Exchange kickfd and callfd to avoid confusion.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
*alloc() routines return void * and therefore cast is not needed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: reverse num and size parameters in vhost calloc]
The function print_client_stats was used in the example without being
clearly exported in the map file. So it breaks linking with shared library
when debug is enabled.
It's better to remove this function as it probably could be implemented
with statistics API.
Fixes: cc7e8ae84f ("add example application for link bonding mode 6")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This app demonstrate usage of new rte_jobstats library.
It is basically the orginal l2fwd with following modifications to met
library requirements:
- main_loop() was split into two jobs: forward job and flush job. Logic
for those jobs is almost the same as in original application.
- stats is moved to rte_alarm callback to not introduce overhead of
printing.
- stats are expanded to show rte_jobstats statistics.
- added new parameter '-l' to automatic thousands separator.
Comparing original l2fwd and l2fwd-jobstats apps will show approach what
is needed to properly write own application with rte_jobstats
measurements.
New available statistics:
- Total and % of fwd and flush execution time
- management time - overhead of rte_timer + overhead of rte_jobstats
library
- Idle time and % of time spent waiting for fwd or flush to be ready to
execute.
- per job execution time and period.
Fixes: 2caeb8c014 ("examples/l2fwd-jobstats: new example")
[Thomas: files were missing in the previous commit]
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This app demonstrate usage of new rte_jobstats library.
It is basically the orginal l2fwd with following modifications to met
library requirements:
- main_loop() was split into two jobs: forward job and flush job. Logic
for those jobs is almost the same as in original application.
- stats is moved to rte_alarm callback to not introduce overhead of
printing.
- stats are expanded to show rte_jobstats statistics.
- added new parameter '-l' to automatic thousands separator.
Comparing original l2fwd and l2fwd-jobstats apps will show approach what
is needed to properly write own application with rte_jobstats
measurements.
New available statistics:
- Total and % of fwd and flush execution time
- management time - overhead of rte_timer + overhead of rte_jobstats
library
- Idle time and % of time spent waiting for fwd or flush to be ready to
execute.
- per job execution time and period.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
There was no error checking after calling rte_reorder_create.
Move the creation of the reorder buffer before launching threads
in case of memory error.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Example showing how callbacks can be used to insert a timestamp
into each packet on RX. On TX the timestamp is used to calculate
the packet latency through the app, in cycles.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Currently for mbufs with refcnt, we cannot free mbufs with external memory
buffers (ie. vhost zero copy), as they are recognized as indirect
attached mbufs and therefore we free the direct mbuf it points to,
resulting in an error in the case of external memory buffers.
We solve the issue by introducing the IND_ATTACHED_MBUF flag, which indicates
that the mbuf is an indirect attached mbuf pointing to another mbuf.
When we free an mbuf, we only free the direct mbuf if the flag is set.
Freeing an mbuf with external buffer is the same as freeing a non attached mbuf.
The flag is set during attach and clear on detach.
So in the case of vhost zero copy where we have mbufs with external
buffers, by default we just free the mbuf and it is up to the user to deal with
the external buffer.
This patch would allow the removal of the RTE_MBUF_REFCNT config option,
setting refcnt for all mbufs permanently.
The patch also modifies the vhost example as it was using the
RTE_MBUF_INDIRECT macro to detect if it was an mbuf with external buffer.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
RSS offload types were defined separately for 1/10G and 40G NICs,
and have no relationship with flow types. The modifications are to
unify all RSS offload types for all PMDs. Unified RSS offload types
have new and common names which can be used for any PMD or
applications, and decouple from specific hardwares.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with fm10k]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch contains an example for link bonding mode 6.
It interact with user by a command prompt. Available commands are:
Start - starts ARP_thread which respond to ARP_requests and sends
ARP_updates (this
Is enabled by default after startup),
Stop -stops ARP_thread,
Send count ip - send count ARP requests for IP,
Show - prints basic bond information, like IPv4 statistics from clients
Help,
Quit.
The best way to test mode 6 is to use this example together with
previous patch:
[PATCH 3/4] bond: add debug info for mode 6 link bonding.
Connect clients thru switch to bonding machine and send:
arping -c 1 bond_ip or
generate IPv4 traffic to bond_ip (IPv4 traffic from different clients
should be then balanced on slaves in round robin manner).
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Support turn on/off RX VLAN strip on host, this let guest get the chance of
using its software VLAN strip functionality.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Check if it has already been vlan-tagged packet, if true, avoid inserting a
duplicated vlan tag into it.
This is a possible case when guest has the capability of inserting vlan tag.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
This new app makes use of the librte_reorder library.
It requires at least 3 lcores for RX, Workers (1 or more) and TX threads.
Communication between RX-Workers and Workers-TX is done by using rings.
The flow of mbufs is the following:
* RX thread gets mbufs from driver, set sequence number and enqueue
them in ring.
* Workers dequeue mbufs from ring, do some 'work' and enqueue mbufs in
ring.
* TX dequeue mbufs from ring, inserts them in reorder buffer, drains
mbufs from reorder and sends them to the driver.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
[Thomas: add in examples/Makefile]
If at build phase we don't make any trie splitting,
then temporary build structures and resulting RT structure might be
much bigger than current.
>From other side - having just one trie instead of multiple can speedup
search quite significantly.
>From my measurements on rule-sets with ~10K rules:
RT table up to 8 times bigger, classify() up to 80% faster
than current implementation.
To make it possible for the user to decide about performance/space trade-off -
new parameter for build config structure (max_size) is introduced.
Setting it to the value greater than zero, instructs rte_acl_build() to:
- make sure that size of RT table wouldn't exceed given value.
- attempt to minimise number of tries in the table.
Setting it to zero maintains current behaviour.
That introduces a minor change in the public API, but I think the possible
performance gain is too big to ignore it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
