Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.
Fixes: f30e69b41f ("ethdev: add device flag to bypass auto-filled queue xstats")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some drivers don't need Rx and Tx queue release callback, make them
optional. Clean up empty queue release callbacks for some drivers.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
ethdev library does the check of dev before calling the link update.
Fixes: acd4818ea2 ("net/pfe: add link status update")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
These headers are used but not included explicitly, including them.
"arpa/inet.h" is included for 'htons' and friends.
"netinet/in.h" is included for 'IPPROTO_IP'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When closing a port, it is supposed to be already stopped,
and marked as such with "dev_started" state zeroed by the stop API.
Resetting "dev_started" before calling the driver close operation
was hiding the case of not properly stopped port being closed.
The flag "dev_started" is not changed anymore in "rte_eth_dev_close()".
In case the "dev_stop" function is called from "dev_close",
bypassing "rte_eth_dev_stop()" API,
the "dev_started" state must be explicitly reset in the PMD
in order to keep the same behaviour.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
The secondary processes are not allowed to release shared resources.
Only process-private resources should be freed in a secondary process.
Most of the time, there is no process-private resource,
so the close operation is just forbidden in a secondary process.
After adding proper check in the port close functions,
some redundant checks in the device remove functions are dropped.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
With removal of old close behavior, the private
port resources must be released in the .dev_close callback.
Freeing of port private resources is moved from
the ".remove(device)" to the ".dev_close(port)" operation
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Pfe pmd has no need to bound host interface
for which we require if_index field.
Setting it to 0 as unused.
Fixes: fe38ad9ba7 ("net/pfe: add device start/stop")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Remove the deprecated unioned fields phys_addr
from the structures rte_memseg and rte_memzone.
They are replaced with the fields iova which are at the same offsets.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Some places were calling the meson function host_machine.system()
instead of the variables is_windows and is_linux defined
in config/meson.build.
At the same time, the missing "Linux restriction" reason is added to
pfe and octeontx2 crypto PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The 'mac_addrs' freeing has been moved to rte_eth_dev_release_port(),
so freeing 'mac_addrs' like this in pfe_eth_exit() is unnecessary and
will cause double free.
Fixes: 67fc3ff97c ("net/pfe: introduce basic functions")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The PMD logtype is a legacy from original DPDK logging.
All drivers must use their own dynamic log type.
Fixes: b1bc1afa4a ("net/pfe: support dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch add link related operations like
link update, up and down.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
To update MAC address or MTU, operations are
added to the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for supported packet types
by the platform andbasic statistics like
numbers of packets/bytes receive and transmit.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
HIF or host interface is responsible for transmit
and receive packets between physical ethernet
interfaces and HIF library defined logical interfaces.
This patch initialise that host interface and MAC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add some hardware specific macros
and functions that will be used by the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
