Test commands are added to support selecting different length of GRE key.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Test commands are added to support selecting input set, or adding
new input set per different pctype.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Add a performance test for ring pmd, comparing performance of the pmd
compared to the basic rte_ring APIs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds a command to display DCB info in ports.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch changes the testpmd DCB forwarding stream to make it
based on traffic class.
It also fixes some coding style issues.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The "show port X rss-hash" command sometimes displays garbage instead of the
expected RSS hash key because the maximum key length is undefined. When the
requested key is too large to fit in the buffer,
rte_eth_dev_rss_hash_conf_get() does not update it.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
DPDK uses a structure to get or set a new hash key (see
eth_rte_rss_hash_conf). rss_hf field from this structure is used in
rss_hash_get_conf to retrieve the hash key and in rss_hash_update uses
it to verify the key exists before trying to update it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
For some ethnet-switch like intel RRC, all the packet forwarded
out by DPDK will be dropped in switch side, so the packet
generator will never receive the packet.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The different fdir mode needs different parameters, so, the parameter *mode*
is introduced to the CLI flow_director_filter and flow_director_mask. This
parameter can pormpt the user to input the appropriate parameters for different
mode.
Please be aware, as we should set the fdir mode, the value of the parameter
pkt-filter-mode, when we start testpmd. We cannot set a different mode for
mask or filter.
The new CLIs are added for the mac vlan and tunnel modes, like this,
flow_director_mask X mode MAC-VLAN vlan XXXX mac XX,
flow_director_mask X mode Tunnel vlan XXXX mac XX tunnel-type X tunnel-id XXXX,
flow_director_filter X mode MAC-VLAN add/del/update mac XX:XX:XX:XX:XX:XX
vlan XXXX flexbytes (X,X) fwd/drop queue X fd_id X,
flow_director_filter X mode Tunnel add/del/update mac XX:XX:XX:XX:XX:XX
vlan XXXX tunnel NVGRE/VxLAN tunnel-id XXXX flexbytes (X,X) fwd/drop queue X
fd_id X.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
There're fdir mask and supported flow type in the output of the CLI,
show port fdir. But not every parameter has meaning for all the fdir
modes, and the supported flow type is meaningless for mac vlan and
tunnel modes. So, we output different thing for different mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For testpmd CLI's parameter pkt-filter-mode, there're new values supported for
fdir new modes, perfect-mac-vlan, perfect-tunnel.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When a port is enabled, there're default values for the parameters of
fdir mask. For the new parameters, the default values also need to be
set.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This is a useful default for simple applications where the assignment
of lcores to CPUs doesn't matter. It's also useful for more complex
applications that automatically assign tasks to cores based on the
NUMA topology.
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Currently, there is a MAX_SOCKET macro which artificially limits the
number of NUMA sockets testpmd can use. Anything on a higher socket
ends up using socket zero. This patch replaces this with a variable
set during set_default_fwd_lcores_config() and uses RTE_MAX_NUMA_NODES
where a hard-coded max number of sockets is required.
Signed-off-by: Stephen Hurd <shurd@broadcom.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
'virtual' is a keyword and can't be used if the code is to compile with
C++ compilers.
If rte_devargs.h was included in C++ code, compilation with clang++
failed with an error. g++ did not fail, but only because of a bug
that treats it as an anonymous struct with a decl-specifier which it
ignores.
This simply renames the member to 'virt'.
Reported-by: Ming Zhao <mzhao@luminatewireless.com>
Signed-off-by: Christoph Gysin <christoph.gysin@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This patch relates to ABI change proposed for librte_port. Macros to
access the packet meta-data stored within the packet buffer has been
adjusted to cover the packet mbuf structure.
The LIBABIVER number is incremented.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
LPM table and pipeline apps have been modified to
include name parameter of the lpm table.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The function rte_jhash2() was renamed rte_jhash_32b and
macros RTE_HASH_KEY_LENGTH_MAX and RTE_HASH_BUCKET_ENTRIES_MAX
were tagged as deprecated, so they can be removed in 2.2.
RTE_HASH_KEY_LENGTH is replaced in unit tests by an internal macro
for the memory allocation of all keys used.
The library version number is incremented.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions were tagged as deprecated in 2.0 so they can be
removed in 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: update doc and version]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The functions and structures are moved to app/test in order to keep
existing unit tests. Some minor changes were done in these functions
because of library scope restrictions.
An enum is also copied in two other applications to keep existing code.
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended SCTP flow entries are now part of the standard API.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
In table_autotest, the structures containing the parameters
to create the tables were not initialized, and therefore,
some checks could fail and so the unit test.
Also, due to this initialization, one of the tests that was
checking if the table was improperly initialized has been
removed, as it is not needed anymore (duplicated)
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In commit: 1129992baa61d72c5 checking for offset alignment was removed.
Unit tests wasn't updated to reflect that change. This patch changes
checks with unaligned offsets to make tests pass.
Fixes: 1129992baa61 ("port: fix unaligned access to metadata")
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Test failed on verification if number of bytes
transmitted on each slave is not less than 90%
and greater than 110% of mean value of bytes transmitted
thru one slave. This was verified on a real system
but is difficult to achieve using virtualpmd.
That's why for unit tests only, it is sufficient to verify that with
high load (2 seconds transmission) all slaves are transmitting
so the traffic is balanced.
Fixes: 0c8396e6d786 ("bond: unit tests for mode 5")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
'--no-huge' option now can workable with -m option.
Unit test for eal flag should change pass criterion.
Fixes: a7de7e6beb69 ("eal: allow combining -m and --no-huge")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
In previous setting, mempool size and cache_size were both 32.
It does not satisfy with cache_size checking rule by now.
Cache size should be less than CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE and
mempool size / 1.5.
Fixes: 462321b44a80 ("mempool: limit cache size")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove unused PKT_BURST_SZ]
Add new timer-manage race-condition test: We wrote a test to confirm
our suspicion that we could crash rte_timer_manage() under the right
circumstances. We repeatedly set several timers to expire at roughly
the same time on the master core. The master lcore just delays and runs
rte_timer_manage() about ten times per second. The slave lcores all
watch the first timer (timer-0) to see when rte_timer_manage() is
running on the master, i.e., timer-0's state is not PENDING.
At this point, each slave attempts to reset a subset of the timers to
a later expiration time. The goal here is to have the slaves moving
most of the timers to a different place in the master's pending-list,
while the master is traversing the same next-pointers (the slaves'
sl_next[0] pointers) and running callback functions. This eventually
results in the master traversing a corrupted linked-list.
In our observations, it results in an infinite loop.
Signed-off-by: Robert Sanford <rsanford@akamai.com>
Fix app/test timer stress test 2: Sometimes this test fails and
seg-faults because the slave lcores get out of phase with the master.
The master uses a single int, 'ready', to synchronize multiple slave
lcores through multiple phases of the test.
To resolve, we construct simple synchronization primitives that use one
atomic-int state variable per slave. The master tells the slaves when to
start, and then waits for all of them to finish. Each slave waits for
the master to tell it to start, and then tells the master when it has
finished.
Signed-off-by: Robert Sanford <rsanford@akamai.com>
When close one port twice, testpmd will give out wrong messagse.
testpmd> port stop 0
Stopping ports...
Checking link statuses...
Port 0 Link Up - speed 0 Mbps - full-duplex
Port 1 Link Up - speed 0 Mbps - full-duplex
Done
testpmd> port close 0
Closing ports...
Done
testpmd> port close 0
Closing ports...
Port 0 is now not stopped
Done
testpmd>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
In testpmd, when using "rx_vlan add 1 77", it will be a segment fault
Because the port ID should be less than 32.
Fixes: edab33b1c01d ("app/testpmd: support port hotplug")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
When the bonded port is started it also starts the slave port,
but the slave port status is not set. A slave_flag has been
added to struct rte_port to resolve this issue.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
[Thomas: move inclusion used by ixgbe bypass]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
A packet is tunnelled if the tunnel type is identified or if it has
an inner part.
Fix also some typos in RTE_PTYPE_INNER_L3_MASK and IP comments.
Fixes: f295a00a2b44 ("mbuf: add definitions of unified packet types")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In ieee1588fwd.c, timestamp.tv_sec is a time_t variable,
which is a long int, but it was being printed with PRIu64,
causing an issue on 32 bits.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
At this point the stop() and close() functions have already been called.
The rte_eth_promiscuous_disable() function does not return on the VM.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
proc_info displays statistics information including extended stats for
given DPDK ports and dumps the memory information for DPDK.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Implement rte_memzone_free which, as its name implies, would free a
memzone.
Currently memzone are tracked in an array and cannot be free.
To be able to reuse the same array to track memzones, we have to
change how we keep track of reserved memzones.
With this patch, any memzone with addr NULL is not used, so we also need
to change how we look for the next memzone entry free.
Add new unit test for rte_memzone_free API.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Some unit test are not relevant anymore. It is the case of those malloc
UTs that checked corner cases when allocating MALLOC_MEMZONE_SIZE
chunks, and the case of those memzone UTs relaying of specific free
memsegs of rhte reserved memzone.
Other UTs just need to be update, for example, to calculate maximum free
block size available.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The cuckoo hash has a fixed number of entries per bucket, so the
configuration parameter for this is unused. We change this field in the
parameters struct to "reserved" to indicate that there is now no such
parameter value, while at the same time keeping ABI consistency.
Fixes: 48a399119619 ("hash: replace with cuckoo hash implementation")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The original code mistakenly defaulted to X86 when RTE_ARCH_PPC_64 was
left undefined. This did not accommodate other non-PPC/non-X86
architectures. This patch fixes this issue.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since now rte_hash structure is private, a new function
has been added to let the user iterate through the hash table,
returning next key and data associated on each iteration,
plus the position where they were stored.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
