Do not return "GOOD" flag if the status was bad.
Fixes: 9e6e7f479a ("net/sfc: support Rx checksum offload for EF100")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
ethdev library does the check of dev before calling the link update.
Fixes: acd4818ea2 ("net/pfe: add link status update")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Gagandeep Singh <g.singh@nxp.com>
Kunpeng 930 support Tx push mode which could improve performance.
It works like below:
1. Add PCIe bar45 which support driver direct write the Tx descriptor
or tail reg to it.
2. Support three operations: a) direct write one Tx descriptor, b)
direct write two Tx descriptors, c) direct write tail reg.
3. The original tail reg located at bar23, the above bar45 tail reg
could provide better bandwidth from the hardware perspective.
The hns3 driver only support direct write tail reg (also have the name
of quick doorbell), the detail:
Considering compatibility, firmware will report Tx push capa if the
hardware support it.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Delete redundant blank lines to make:
1.Return value judgment follow the function call.
2.No blank lines at the end of a code block defined by braces.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The "cfg_max_queues" maintains configured max queue numbers from user,
and is equal to the maximum of "nb_rx_queues" and "nb_tx_queues" in
"dev->data".
From the ethdev layer framework, "nb_rx/tx_queues" in "dev->data" were set
to zero in rte_eth_dev_configure() if ops.dev_configure in PMD fails to be
executed, In addition, if ops.dev_configure in HNS3 PMD failed, the fake
queues are also cleared on a device that does not support independent Rx/Tx
queues.
Therefore, the "cfg_max_queues" should be also set to zero when
dev_configure fails.
Fixes: fa29fe45a7 ("net/hns3: support queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When the current VLAN stripping is set, the log print always prompts
that the enabling fails, bug if may actually be the disabling failure.
Fixes: 411d23b9ea ("net/hns3: support VLAN")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When the device supports independent Rx/Tx queues, fake queues do not need
to be created in unequal Rx/Tx queues case. However, dev_configure fails
to be executed on the device supported independent Rx/Tx queues, the
current rollback code logic contains the fake queue. As a result, the fake
queue is created. When dev_configure is successfully called again, these
fake queues still exists and are configured to the hardware.
Fixes: fa29fe45a7 ("net/hns3: support queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When the primary process executes dev_stop or is being reset, the packet
sending and receiving functions is changed. In this moment, the primary
process requests secondary processes to change their Rx/Tx functions, and
delays a period of time in case of crashes when queues are still in use.
The delay time depends on the number of queues actually used, instead of
the maximum number of queues supported by the device.
Fixes: 23d4b61fee ("net/hns3: support multiple process")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When the device is very busy, VF reset may have to be
retried many times to succeed, leading to the current
max reset fail retry count not enough.
Modify max reset fail retry count to 30 to enhance
the reliability of reset function.
Fixes: 2790c64647 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Introduce an internal firmware loading helper to remove code duplication
in our drivers and handle xz compressed firmware by calling libarchive.
This helper tries to look for .xz suffixes so that drivers are not aware
the firmware has been compressed.
libarchive is set as an optional dependency: without libarchive, a
runtime warning is emitted so that users know there is a compressed
firmware.
Windows implementation is left as an empty stub.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Tested-by: Haiyue Wang <haiyue.wang@intel.com>
Both "normal" and "dcf" inits have their copy of some firmware loading
code.
The DSN query is moved in specific parts for the "normal" and "dcf" init.
A common helper ice_load_pkg is then introduced and takes an adapter
pointer as its main input.
This helper takes care of finding the right firmware file and loading
it.
The adapter active_pkg_type field is set by this helper.
The ice_access macro is removed from the osdep.h header: osdep.h should
only hosts wrappers for base driver code.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Caught by code review.
Using a random name for memzone allocations can result in init failures
in the unlikely case that a name collision occurs.
Use a simple sequential generator on 64 bits.
Fixes: 3f50f072ff ("i40e: fix memzone freeing")
Fixes: 22b123a36d ("net/avf: initialize PMD")
Fixes: 5f0978e962 ("net/ice/base: add OS specific implementation")
Fixes: 737f30e1c3 ("net/hns3: support command interface with firmware")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
This patch fixed the unmatched integer type issue in the comparison,
which causing compilation failure on RHEL.
drivers/net/ice/ice_dcf_sched.c:353:15: error:
comparison between signed and unsigned integer expressions
if (node_id > tc_nb * hw->num_vfs) {
^
CI reported the failure:
http://mails.dpdk.org/archives/test-report/2021-July/201905.html
Fixes: 3a6bfc37ea ("net/ice: support QoS config VF bandwidth in DCF")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
The current code doesn't use match on invalid outer rule ID
in action rules of non-encap. flows. This is wrong and must
be fixed. Do that and explain correct behaviour in the code.
Fixes: dadff13793 ("net/sfc: support encap flow items in transfer rules")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The container in the action configuration is U32,
but the ID is U16, and overflow check is missing.
Fixes: 1fb65e4dae ("net/sfc: support flow action port ID in transfer rules")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Take into account VLAN presence fields in items ETH and VLAN.
Provided that the item ETH does not match on the EtherType,
the pattern behaviour will be as follows:
- ETH (mask->has_vlan = 0) | IPv4 = match both tagged and untagged;
- ETH (mask->has_vlan = 1) | IPv4 = match as per spec->has_vlan;
- ETH (mask->has_vlan = 0) | VLAN | IPv4 = match only tagged.
Similar logic applies to double tagging.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This patch adds default RSS support for IPv4 and IPv6 fragment packet.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The rte_eth_devices array is not in share memory, it should not be
referenced by i40e_adapter which is shared by primary and secondary.
Any process set i40e_adapter->eth_dev will corrupt another process's
context.
The patch removed the field "eth_dev" from i40e_adapter.
Now, when the data paths try to access the rte_eth_dev_data instance,
they should replace adapter->eth_dev->data with adapter->pf.dev_data.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For i40e vector Tx path, if tx_offload is set as FAST_FREE_MBUF mode,
no mbuf fast free operations are executed. To fix this, add mbuf fast
free mode for vector Tx path.
Furthermore, for i40e vector Tx path, if implement FAST_FREE_MBUF mode,
it means per-queue all mbufs come from the same mempool and have
refcnt = 1. Thus we can use bulk free of the buffers when mbuf fast free
mode is enabled.
For vector path in arm platform:
In n1sdp, performance is improved by 18.4%;
In thunderx2, performance is improved by 23%.
For vector path in x86 platform:
No performance changes.
Suggested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
For i40e scalar Tx path, if implement FAST_FREE_MBUF mode, it means
per-queue all mbufs come from the same mempool and have refcnt = 1.
Thus we can use bulk free of the buffers when mbuf fast free mode is
enabled.
Following are the test results with this patch:
MRR L3FWD Test:
two ports & bi-directional flows & one core
RX API: i40e_recv_pkts_bulk_alloc
TX API: i40e_xmit_pkts_simple
ring_descs_size = 1024;
Ring_I40E_TX_MAX_FREE_SZ = 64;
tx_rs_thresh = I40E_DEFAULT_TX_RSBIT_THRESH = 32;
tx_free_thresh = I40E_DEFAULT_TX_FREE_THRESH = 32;
For scalar path in arm platform with default 'tx_rs_thresh':
In n1sdp, performance is improved by 7.9%;
In thunderx2, performance is improved by 7.6%.
For scalar path in x86 platform with default 'tx_rs_thresh':
performance is improved by 4.7%.
Suggested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The HW debug mask is always zero, so user can't enable the related debug
function like ICE_DBG_XXX etc, add the devarg 'hw_debug_mask' to set the
debug mask log output at runtime.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently, there'll be conflict error when running
the following commands:
1. flow create 0 ingress
pattern eth / ipv4 / udp src is 32 / end
actions queue index 2 / end
2. flow destroy 0 rule 0
3. flow create 0 ingress
pattern eth / ipv4 / udp dst is 32 / end
actions queue index 2 / end
This patch fixes the input set conflict issue.
Fixes: 42044b69c6 ("net/i40e: support input set selection for FDIR")
Fixes: 4a072ad434 ("net/i40e: fix flow director config after flow validate")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Lingli Chen <linglix.chen@intel.com>
Add check in the Tx packet preparation function, to guarantee that the
packet with specific user priority is distributed to the correct Tx
queue according to the configured Tx queue TC mapping.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch added the support for VF to config the ETS-based Tx QoS,
including querying current QoS configuration from PF and config queue TC
mapping. PF QoS is configured in advance and the queried info is
provided to the user for future usage. VF queues are mapped to different
TCs in PF through virtchnl.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch supports the ETS-based QoS configuration. It enables the DCF
to configure bandwidth limits for each VF VSI of different TCs. A
hierarchy scheduler tree is built with port, TC and VSI nodes.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When link status changes, DCF will receive virtchnl PF event message.
Add support to handle this event, change link status and update link
info.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the adminq command query port ETS function, the root node teid is
needed. However, for DCF, the root node is not initialized, which will
cause error when we refer to the variable. In this patch, we will check
whether the root node is available or not first.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add a specific path for RX AVX2.
In this path, support the HW offload features, like,
checksum, VLAN stripping, RSS hash.
This path is chosen automatically according to the
configuration.
'inline' is used, then the duplicate code is generated
by the compiler.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Leyi Rong <leyi.rong@intel.com>
Add a specific path for TX AVX2.
In this path, support the HW offload features, like,
checksum insertion, VLAN insertion.
This path is chosen automatically according to the
configuration.
'inline' is used, then the duplicate code is generated
by the compiler.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Leyi Rong <leyi.rong@intel.com>
Since each PF does not share the same structure space, the first
mask value should start at 0 instead of hw->pf_id * per_pf to avoid
address overflow. Otherwise, address space will overlap when
masks.first + masks.count > ICE_PROF_MASK_COUNT, and it may lead to
unexpected variable assignment, which causes segmentation fault.
Fixes: 9467486f17 ("net/ice/base: enable masking for RSS and FD field vectors")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
i40e can support following rss hash function types: default/toeplitz,
symmetric toeplitz, and simple_xor. However, when filter engine parses
pattern action, it only supports symmetric toeplitz & default.
Add simple_xor and toeplitz hash functions support when parsing pattern
action.
Fixes: ef4c16fd91 ("net/i40e: refactor RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The len variable, used in the computation of max_pkt_len could overflow,
if used to store the result of the following computation:
ICE_SUPPORT_CHAIN_NUM * rxq->rx_buf_len
Since, we could define the mbuf size to have a large value (i.e 13312),
and ICE_SUPPORT_CHAIN_NUM is defined as 5, the computation mentioned
above could potentially result in a value which might be bigger than
MAX_USHORT.
The result will be that Jumbo Frames will not work properly
Fixes: 1b009275e2 ("net/ice: add Rx queue init in DCF")
Cc: stable@dpdk.org
Signed-off-by: Tudor Cornea <tudor.cornea@keysight.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The flag use_avx2 and use_avx512 are defined as local variables, they
will not be aware by the secondary process, then wrong data path is
selected. Fix the issue by moving them into struct i40e_adapter.
Fixes: 6ada10deac ("net/i40e: remove devarg use-latest-supported-vec")
Fixes: e6a6a13891 ("net/i40e: add AVX512 vector path")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support AVF RSS for inner header of GRE tunnel packet. It supports
RSS based on fields inner IP src + dst address and TCP/UDP src + dst
port.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds IPV4/IPV6 SRC/DST input set for ESP/NAT_T_ESP to
support outer IP match.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds IPV4/IPV6 SRC/DST input set for ESP to support
outer IP match.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
mz is known to be NULL. Do not use it to print a memzone name.
Fixes: 242e18c056 ("net/octeontx_ep: add Rx queue setup and release")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Enable PTP offload in vector Tx burst function. Since, we can
no-longer use a single LMT line for burst of 4, split the LMT
into two and transmit twice.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Enable PTP offload in vector Rx burst function, use vector path
for processing mbufs and finally switch to scalar when extracting
timestamp.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding a new callback for reading the link status. PF can read it's
link status and can forward the same to VF once it comes up.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently LSO formats setup initially are expected to be
compile time constants and start from 0.
Change the logic in slow and fast path so that LSO format indexes
are only determined runtime.
Fixes: 3b635472a9 ("net/octeontx2: support TSO offload")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
