Introduce a new API to get the status of a descriptor.
For Rx, it is almost similar to rx_descriptor_done API, except it
differentiates "used" descriptors (which are hold by the driver and not
returned to the hardware).
For Tx, it is a new API.
The descriptor_done() API, and probably the rx_queue_count() API could
be replaced by this new API as soon as it is implemented on all PMDs.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a new API to force free consumed buffers on Tx ring. API will return
the number of packets freed (0-n) or error code if feature not supported
(-ENOTSUP) or input invalid (-ENODEV).
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
The check of queue_id is done in all drivers implementing
rte_eth_rx_queue_count(). Factorize this check in the generic function.
Note that the nfp driver was doing the check differently, which could
induce crashes if the queue index was too big.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The API comments are not consistent between each other.
The function rte_eth_rx_queue_count() returns the number of used
descriptors on a receive queue.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
remove the following API's:
rte_eth_dev_set_vf_rxmode
rte_eth_dev_set_vf_rx
rte_eth_dev_set_vf_tx
rte_eth_dev_set_vf_vlan_filter
rte_eth_dev_set_vf_rate_limit
Increment LIBABIVER in Makefile
Remove deprecation notice for removing rte_eth_dev_set_vf_* API's.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch adds a new API 'rte_eth_dev_fw_version_get' for
fetching firmware version by a given device.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
If these flags are advertised by a PMD, the NIC supports the MACsec
offload. The incoming MACsec traffics can be offloaded transparently
after the MACsec offload is configured correctly by the application.
And the application can set the PKT_TX_MACSEC flag in mbufs to enable
the MACsec offload for the packets to be transmitted.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
This commit adds a below event type:
- RTE_ETH_EVENT_MACSEC
This event will occur when the PN counter in a MACsec connection
reaches the exhaustion threshold.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Added API for `rte_eth_tx_prepare`
uint16_t rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id,
struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
Added fields to the `struct rte_eth_desc_lim`:
uint16_t nb_seg_max;
/**< Max number of segments per whole packet. */
uint16_t nb_mtu_seg_max;
/**< Max number of segments per one MTU */
These fields can be used to create valid packets according to the
following rules:
* For non-TSO packet, a single transmit packet may span up to
"nb_mtu_seg_max" buffers.
* For TSO packet the total number of data descriptors is "nb_seg_max",
and each segment within the TSO may span up to "nb_mtu_seg_max".
Added functions:
int
rte_validate_tx_offload(struct rte_mbuf *m)
to validate general requirements for tx offload set in mbuf of packet
such a flag completness. In current implementation this function is
called optionaly when RTE_LIBRTE_ETHDEV_DEBUG is enabled.
int rte_net_intel_cksum_prepare(struct rte_mbuf *m)
to prepare pseudo header checksum for TSO and non-TSO tcp/udp packets
before hardware tx checksum offload.
- for non-TSO tcp/udp packets full pseudo-header checksum is
counted and set.
- for TSO the IP payload length is not included.
int
rte_net_intel_cksum_flags_prepare(struct rte_mbuf *m, uint64_t ol_flags)
this function uses same logic as rte_net_intel_cksum_prepare, but
allows application to choose which offloads should be taken into
account, if full preparation is not required.
PERFORMANCE TESTS
-----------------
This feature was tested with modified csum engine from test-pmd.
The packet checksum preparation was moved from application to Tx
preparation step placed before burst.
We may expect some overhead costs caused by:
1) using additional callback before burst,
2) rescanning burst,
3) additional condition checking (packet validation),
4) worse optimization (e.g. packet data access, etc.)
We tested it using ixgbe Tx preparation implementation with some parts
disabled to have comparable information about the impact of different
parts of implementation.
IMPACT:
1) For unimplemented Tx preparation callback the performance impact is
negligible,
2) For packet condition check without checksum modifications (nb_segs,
available offloads, etc.) is 14626628/14252168 (~2.62% drop),
3) Full support in ixgbe driver (point 2 + packet checksum
initialization) is 14060924/13588094 (~3.48% drop)
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The struct rte_intr_handle is an abstraction layer for different types of
interrupt mechanisms. It is embedded in the low-level device (e.g. PCI).
On allocation of a struct rte_eth_dev a reference to the intr_handle
should be stored for devices supporting interrupts.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
- Grouped related items using empty lines
- Aligned arguments to same column
- All item comments that doesn't fit same line are placed blow the item
itself
- Moved some comments to same line if overall line < 100 chars
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add comments to describe that not all statistics fields in
struct rte_eth_stats are supported by any type of network
interface card. If any statistics field is not supported,
its value is 0.
Signed-off-by: Wei Dai <wei.dai@intel.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
The vdev eth_ring has been renamed to net_ring.
Some unit tests are using the old name and fail.
Fixes also the vdev comments in EAL and ethdev.
Fixes: 2f45703c17ac ("drivers: make driver names consistent")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To enable Tx side offload on tunneling packet, driver should set
correct tunneling parameters: (1) EIPT, External IP header type;
(2) EIPLEN, External IP; (3) L4TUNT; (4) L4TUNLEN. This parsing
behavior is based on (ol_flag & PKT_TX_TUNNEL_MASK). And when
it's a tunneling packet, MACLEN defines the outer L2 header.
Also, we define TSO on each kind of tunneling type as a capabilities.
Now only i40e declares to support them.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The "imissed" stats represent RX packets dropped by the HW,
so we should not talk about mbufs as the hardware is not aware
of this structure. Buffer seems to be a better word.
Fixes: 4eadb8ba11b7 ("ethdev: do not deprecate imissed counter")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that hotplug has been moved to eal, there is no reason to keep the
device type in this layer.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
crypto and ethdev drivers aligned to PCI probe/remove. These wrappers are
mapped directly to PCI resources.
Existing handlers for init/uninit can be easily reused for this.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Exported header files used by applications should allow the strictest
compiler flags. Language extensions used in many places must be explicitly
marked or removed to avoid warnings and compilation failures.
This commit prevents the following errors:
error: type of bit-field `[...]' is a GCC extension
Note: the standard does not require implementations to issue a diagnostic
message with these, and such errors do not occur with recent GCC or clang
versions. However, GCC 4.7 is still common and using the extension keyword
is easier than checking compiler version.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The ethtool app was allocating too little space for 64-bit
registers which resulted in memory corruption.
Removes hard-coded assumption that device registers
are always 32 bits wide. The rte_eth_dev_get_reg_length
and rte_eth_dev_get_reg_info callbacks did not
provide register size to the app in any way while is
needed to allocate correct number of bytes before
retrieving registers using rte_eth_dev_get_reg.
This commit changes rte_eth_dev_get_reg_info so that
it can be used to retrieve both the number of registers
and their width, and removes the now-redundant
rte_eth_dev_get_reg_length.
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Acked-by: Remy Horton <remy.horton@intel.com>
For all drivers that currently implement xstats, the id field in the
rte_eth_stats_name structure equals the entry's array index. This
patch eliminates the redundant id field as a direct index lookup is
faster than a search for the matching id field.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
The old structure rte_eth_xstats contained names and values.
The new structure rte_eth_xstat contains ids and values.
Fixes: bd6aa172cf35 ("ethdev: fetch extended statistics with integer ids")
Fixes: e2aae1c1ced9 ("ethdev: remove name from extended statistic fetch")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Previously, a single VLAN header is treated as inner VLAN,
but generally, a single VLAN header is treated as the outer
VLAN header.
The patch fixes the ether type of a single VLAN type, and
enables configuring inner and outer TPID for double VLAN.
Fixes: 19b16e2f6442 ("ethdev: add vlan type when setting ether type")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
In current i40e codebase, if single VLAN header is added in a packet,
it's treated as inner VLAN. Generally, a single VLAN header is
treated as the outer VLAN header, so update the driver behaviour
appropriately.
Fixes: 19b16e2f6442 ("ethdev: add vlan type when setting ether type")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch enables configuring MTU for i40e.
Since changing MTU needs to reconfigure queue, the port must be
stopped before configuring MTU.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Elements of struct rte_eth_dev used in the fast path.
Make struct rte_eth_dev cache aligned to avoid the cases where
rte_eth_dev elements share the same cache line with other structures.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Converted rte_eth_dev_get_port_by_name to a public API.
Converted rte_eth_dev_get_name_by_port to a public API.
The librte_pdump library provides the APIs to enable or disable the
packet capture either using the port id or pci address or device name.
So pdump library need to do a mapping from name to port and port to name
internally to validate the device name and register the Rx and Tx
callbacks for the mapped ports. So these APIs are made public for the
pdump library for doing the mentioned mappings.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The new fields nb_rx_queues and nb_tx_queues are added to the
rte_eth_dev_info structure.
Changes to API rte_eth_dev_info_get() are done to update these new fields
to the rte_eth_dev_info object.
Release notes is updated with the changes.
The librte_pdump library needs to register Rx and Tx callbacks for all
the nb_rx_queues and nb_tx_queues, when application wants to capture the
packets on all the software configured number of Rx and Tx queues of the
device. So far there is no support to get nb_rx_queues and nb_tx_queues
information from the ethdev library. Hence these changes are introduced.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added new public api rte_eth_add_first_rx_callback to add given
callback as head of the list.
The librte_pdump library should display Rx packets of the
NIC even before they are being processed by other callbacks
of the application (because other callbacks of the application
may change the packet data as part of the processing).
So packet capturing framework should register a callback at the
head of the Rx callback list so that callback always gets called
first before any other callbacks of the applications. Hence this API
is introduced.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the xstats
functions to instead use a numeric identifier rather than a string, and
adds the ability to retrieve identifier-to-string mappings.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Following the discussion on dpdk-users [1], enhance the API
documentation of rte_eth_tx_burst() to specify that the mbufs have to be
allocated from a pool.
[1] http://dpdk.org/ml/archives/users/2016-June/000618.html
Reported-by: Xiaoban Wu <xiaoban_wu@student.uml.edu>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542af4).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This change is to make user code simpler. For PMDs which do not fill any
packet types, return 0 instead of -ENOTSUP as suggested by Bruce.
Usually, users only care if the required (by ptype_mask) ptypes can be
filled by the specified PMD. If the PMD implements dev_supported_ptypes_get
func is not important. And the introduce of another return value (-ENOTSUP)
would increase the complexity of user programs to check it.
Besides, there are ways to know if a PMD implements the func:
a. see doc/guides/nics/overview.rst.
b. use (~1) as parameter ptype_mask, then check if return 0.
Fixes: 78a38edf66de ("ethdev: query supported packet types")
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
