This patch fixes the build dependency of various
dpaaX components, when the dpaa or fslmc bus is disabled,
or VFIO is disabled.
Fixes: 1ee9569576 ("config: enable dpaaX drivers for generic ARMv8")
Cc: stable@dpdk.org
Reported-by: Yongseok Koh <yskoh@mellanox.com>
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
There are several func calls to rte_zmalloc() which don't do null
point check on the return value. And before return, the memory is not
freed. Fix it by adding null point check and rte_free().
Fixes: 1703e94ac5 ("qat: add driver for QuickAssist devices")
Fixes: e09231eaa2 ("crypto/qat: add SGL capability")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The coverity issue was not completely fixed, since strncpy
should not be called with max length.
Instead, snprintf is used as a safer option.
Coverity issue: 143431
Fixes: d040aca671 ("crypto/scheduler: fix strings not null terminated")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add in a crypto driver class, and implement compiling the null crypto
instance.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
dpaa2_sec/dpaa2_sec_dpseci.c:1287:25: error: implicit conversion from
enumeration type 'enum rte_crypto_aead_algorithm' to different enumeration
type 'enum rte_crypto_cipher_algorithm' [-Werror,-Wenum-conversion]
session->cipher_alg = RTE_CRYPTO_AEAD_AES_GCM;
Fixes: 13273250ee ("crypto/dpaa2_sec: support AES-GCM and CTR")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Issue detected by coverity. Could never actually cause a
problem as truncated value (0x7f7f7f7f->0x7f) is what's needed.
But fix in code for correctness.
Coverity issue: 194998
Fixes: 571365dd4c ("crypto/qat: enable Rx head writes coalescing")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
If auth algorithm is RTE_CRYPTO_AUTH_NULL and digest_length is 0
in the xform and digest pointer is set in the op, then
the PMD may overwrite memory at the digest pointer.
With this patch the memory is not overwritten.
Fixes: db0e952a5c ("crypto/qat: add NULL capability")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
This commit fixes right cast from qat_cipher_get_block_size
function. This function can return -EFAULT in case of
any error, and that value must be cast to int instead of uint8_t
Fixes: d18ab45f76 ("crypto/qat: support DOCSIS BPI mode")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This commit fixes
- bpi_cipher_encrypt to prevent before 'array subscript is
above array bounds' error
- bpi_cipher_decrypt to prevent before 'array subscript is
above array bounds' error
Fixes: d18ab45f76 ("crypto/qat: support DOCSIS BPI mode")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Seen with GCC 7.2.0, a switch fall through is detected and
cannot be fixed with a fall-through comment or attribute:
drivers/crypto/dpaa2_sec/hw/rta/operation_cmd.h:89:6: error:
this statement may fall through [-Werror=implicit-fallthrough=]
if (rta_sec_era < RTA_SEC_ERA_2)
^
The check is disabled in dpaa2_sec Makefile but not in dpaa_sec Makefile
which uses source code shared by dpaa2_sec.
The workaround is to disable the check at the beginning of the file.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Two macros were defined in cryptodev, to serve the same
purpose: RTE_CRYPTODEV_NAME_LEN (in the config file) and
RTE_CRYPTODEV_NAME_MAX_LEN (in the rte_cryptodev.h file).
Since the second one is part of the external API,
the first one has been removed, avoiding duplications.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Context memory is allocated from mempool. Ideally
it will get all memory from single segment, so simple offset
calculation is used for address conversion for such addresses
from context memory.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
With the current QBMAN multi-tx API, we need to create separate
enqueue descriptors for each of the packet which is required to
be enqueued to the hardware, once we support Atomic Queues
(with DCA) in dpaa2 drivers. Creating enqueue descriptor for
each packet is costly and have significant performance impact.
This patch introduces a flag parameter in the QBMAN multi-tx API,
so that DCA configuration (and later on ORP/ODP for ordered queues)
can be passed using flags and be updated in the EQCR using this flag.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for dynamic iova detection for DPAA2
devices and use of virtual address in such cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA and DPAA2 drivers were using memseg physaddr, which
has been deprecated.
Fixes: 7ba49d39f1 ("mem: rename segment address from physical to IOVA")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Following changes are needed to switch to musdk-17.10:
- With a new version of the musdk library it's no longer necessary to
explicitly define MVCONF_ARCH_DMA_ADDR_T_64BIT and
CONF_PP2_BPOOL_COOKIE_SIZE.
Proper defines are auto generated by ./configure script based on
passed options and available after mv_autogen_comp_flags.h inclusion.
- API used to set promiscuous mode was renamed. Thus in order to
compile against the latest library new API must be used.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The file rte_config.h is generated and automatically included
with -include option.
The explicit includes in drivers and libraries are useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When moving the library dependencies handling from top Makefiles
to library Makefiles, the list core-libs became useless.
Fixes: cbc12b0a96 ("mk: do not generate LDLIBS from directory dependencies")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
