Removes any dependency of librte_cryptodev on the virtual device
infrastructure code and removes the functions which were virtual
device specific.
Updates all virtual PMDs to remove dependencies on rte_cryptodev_vdev.h
and replaces those calls with the new bus independent functions.
Due to these changes, the cryptodev ABI version gets bumped.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Tomasz Duszynski <tdu@semihalf.com>
When performing an authentication verification,
the PMD was using memory at the end of the input buffer,
to store temporarily the digest.
This operation requires the buffer to have enough
tailroom unnecessarily.
Instead, memory is allocated for each queue pair, to store
temporarily the digest generated by the driver, so it can
be compared with the one provided in the crypto operation,
without needing to touch the input buffer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
When register a crypto driver, a cryptodev driver
structure was being allocated, using malloc.
Since this call may fail, it is safer to allocate
this memory statically in each PMD, so driver registration
will never fail.
Coverity issue: 158645
Fixes: 7a364faef185 ("cryptodev: remove crypto device type enumeration")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
When calling rte_cryptodev_sym_session_init(),
if there was an error, it returned -1, instead
of returning the specific error code, which can
be valuable for the application for error handling.
Fixes: b3bbd9e5f265 ("cryptodev: support device independent sessions")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For KASUMI F9 algorithm, COUNT, FRESH and DIRECTION
input values need to be contiguous with
the message, as described in the KASUMI and QAT PMD
documentation.
Before, the COUNT and FRESH values were set
as part of the AAD (now IV), but always set before
the beginning of the message.
Since now the IV is set after the crypto operation,
it is not possible to have these values in the
expected location.
Therefore, as these are required to be contiguous,
cryptodev API will expect these them to be passed
as a single buffer, already constructed, so
authentication IV parameters not needed anymore.
Fixes: 681f540da52b ("cryptodev: do not use AAD in wireless algorithms")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Change crypto device's session management to make it
device independent and simplify architecture when session
is intended to be used on more than one device.
Sessions private data is agnostic to underlying device
by adding an indirection in the sessions private data
using the crypto driver identifier.
A single session can contain indirections to multiple device types.
New function rte_cryptodev_sym_session_init has been created,
to initialize the driver private session data per driver to be
used on a same session, and rte_cryptodev_sym_session_clear
to clear this data before calling rte_cryptodev_sym_session_free.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since crypto session will not be attached to a specific
device or driver, the field driver_id is not required
anymore (only used to check that a session was being
handled by the right device).
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Cryptodev session structure was a duplication of the
cryptodev symmetric structure.
It was used by some PMDs that should use the symmetric
structure instead.
Since this structure was internal, there is no deprecation
notice required.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Changes device type identification to be based on a unique
driver id replacing the current device type enumeration, which needed
library changes every time a new crypto driver was added.
The driver id is assigned dynamically during driver registration using
the new macro RTE_PMD_REGISTER_CRYPTO_DRIVER which returns a unique
uint8_t identifier for that driver. New APIs are also introduced
to allow retrieval of the driver id using the driver name.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Digest length was duplicated in the authentication transform
and the crypto operation structures.
Since digest length is not expected to change in a same
session, it is removed from the crypto operation.
Also, the length has been shrunk to 16 bits,
which should be sufficient for any digest.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For wireless algorithms (SNOW3G, KASUMI, ZUC),
the IV for the authentication algorithms (F9, UIA2 and EIA3)
was taken from the AAD parameter, as there was no IV parameter
in the authentication structure.
Now that IV is available for all algorithms, there is need
to keep doing this, so AAD is not used for these algorithms
anymore.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV parameters (offset and length) should not
change for operations in the same session, these parameters
are moved to the crypto transform structure, so they will
be stored in the sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV now is copied after the crypto operation, in
its private size, IV can be passed only with offset
and length.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Session type (operation with or without session) is not
something specific to symmetric operations.
Therefore, the variable is moved to the generic crypto operation
structure.
Since this is an ABI change, the cryptodev library version
gets bumped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since SSE4 is now part of the minimum requirements for DPDK, we don't need
to check for its presence any more.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move all functions handling virtual devices to a separate
header file "rte_cryptodev_vdev.h", in order to leave only
generic functions for any device in the rest of the files.
It also creates the file "rte_cryptodev_pmd.c", with the
implementations of these functions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Only non virtual devices were storing the pointer to
rte_device structure in rte_cryptodev, which will be needed
to retrieve the driver name for any device.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Crypto devices of the same type could be initialized
with the same name, since internally this name was suffixed
with an index.
Since commit <dda987315ca2> ("vdev: make virtual bus use its
device struct"), this is not allowed anymore.
Therefore, there is no need to create an unique name
at device initialization.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Check if virtual device name is NULL,
to avoid possible segmentation faults.
Fixes: 5d2aa461cbca ("vdev: use generic vdev struct for probe and remove")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This is a preparation to embed the generic rte_device into the rte_eth_dev
also for virtual devices.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring enqueue burst/bulk functions so that
those functions can optionally return the amount of free space in the
ring. This information can be used by applications in a number of ways,
for instance, with single-producer queues, it provides a max
enqueue size which is guaranteed to work. It can also be used to
implement watermark functionality in apps, replacing the older
functionality with a more flexible version, which enables apps to
implement multiple watermark thresholds, rather than just one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When ciphering and authenticating in the same operation
(cipher-then-auth or auth-then-cipher),
the cipher key and authentication key were set with the same
key, in SNOW3G, KASUMI and ZUC PMDs.
They were using the key of the first transform structure,
instead of using the keys of the two different transform
structures.
This is not a big issue, since usually, the same key is
used for ciphering and authentication, but keys may be different.
Fixes: 3aafc423cf4d ("snow3g: add driver for SNOW 3G library")
Fixes: 2773c86d061a ("crypto/kasumi: add driver for KASUMI library")
Fixes: cf7685d68f00 ("crypto/zuc: add driver for ZUC library")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch adds a user defined name initializing parameter to cryptodev
library.
Originally, for software cryptodev PMD, the vdev name parameter is
treated as the driver identifier, and will create an unique name for each
device automatically, which is not necessarily as same as the vdev
parameter.
This patch allows the user to either create a unique name for his software
cryptodev, or by default, let the system creates a unique one. This should
help the user managing the created cryptodevs easily.
Examples:
CLI command fragment 1: --vdev "crypto_aesni_gcm_pmd"
The above command will result in creating a AESNI-GCM PMD with name of
"crypto_aesni_gcm_X", where postfix X is the number assigned by the system,
starting from 0. This fragment can be placed in the same CLI command
multiple times, resulting the postfixs incremented by one for each new
device.
CLI command fragment 2: --vdev "crypto_aesni_gcm_pmd,name=gcm1"
The above command will result in creating a AESNI-GCM PMD with name of
"gcm1". This fragment can be placed in the same CLI command multiple
times, as long as each having a unique name value.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch introduces RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER feature flag
informing that selected crypto device supports segmented mbufs natively
and doesn't need to be coalesced before crypto operation.
While using segmented buffers in crypto devices may have unpredictable
results, for PMDs which doesn't support it natively, additional check is
made for debug compilation.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This registers the legacy names of the driver being renamed in
commit 2f45703c17ac ("drivers: make driver names consistent").
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit fixes a compilation error on icc,
due to unallowed conversion from int to enum:
drivers/crypto/snow3g/rte_snow3g_pmd.c(155):
error #188: enumerated type mixed with another type
sess->op = mode;
^
drivers/crypto/kasumi/rte_kasumi_pmd.c(155):
error #188: enumerated type mixed with another type
sess->op = mode;
^
Fixes: 3aafc423cf4d ("snow3g: add driver for SNOW 3G library")
Fixes: 2773c86d061a ("crypto/kasumi: add driver for KASUMI library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Inline with PCI probe and remove, VDEV probe and remove hooks provide
a uniform naming.
PCI probe represents scan and driver initialization. For VDEV, it will
represent argument parsing and initialization.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
- All devices register themselfs by calling a kind of DRIVER_REGISTER_XXX.
The PMD_REGISTER_DRIVER is not used anymore.
- PMD_VDEV type is also not being used - can be removed from all VDEVs.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
All PMD_VDEV drivers can now use rte_vdev_driver instead of the
rte_driver (which is embedded in the rte_vdev_driver).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
KASUMI PMD only supports bit-level cipher operations
when destination buffer is different from the source
(out of place operations). This commit adds a check
in the code to prevent the user from trying to perform
in-place bit-level ciphering.
Fixes: 2773c86d061a ("crypto/kasumi: add driver for KASUMI library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Driver arguments shown with DRIVER_REGISTER_PARAM_STRING
have been separated in multiple lines and indented to
ease their readability.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Recently reported, the introduction of pmd information exports led to a
breakage of cryptodev unit tests because the test infrastructure relies on the
cryptodev names being available in macros. This patch fixes the pmd naming to
use the macro names. Note that the macro names were already pre-stringified,
which won't work as the PMD_REGISTER_DRIVER macro requires the name in both a
processing token and stringified form. As such the names are defined now as
tokens, and converted where needed to stringified form on demand using RTE_STR.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Modify the PMD_REGISTER_DRIVER macro, adding a name argument to it. The
addition of a name argument creates a token that can be used for subsequent
macros in the creation of unique symbol names to export additional bits of
information for use by the pmdinfogen tool. For example:
PMD_REGISTER_DRIVER(ena_driver, ena);
registers the ena_driver struct as it always did, and creates a symbol
const char this_pmd_name0[] __attribute__((used)) = "ena";
which pmdinfogen can search for and extract. The subsequent macro
DRIVER_REGISTER_PCI_TABLE(ena, ena_pci_id_map);
creates a symbol const char ena_pci_tbl_export[] __attribute__((used)) =
"ena_pci_id_map";
Which allows pmdinfogen to find the pci table of this driver
Using this pattern, we can export arbitrary bits of information.
pmdinfo uses this information to extract hardware support from an object
file and create a json string to make hardware support info discoverable
later.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
There is no need to have this parsing inlined in the header.
It brings kvargs dependency to every crypto drivers.
The functions are moved into rte_cryptodev.c.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added new SW PMD which makes use of the libsso_kasumi SW library,
which provides wireless algorithms KASUMI F8 and F9
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_KASUMI_F8
- RTE_CRYPTO_SYM_AUTH_KASUMI_F9
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
