Using 'rte_mb' to synchronize the shared ring head/tail between producer
and consumer will stall the pipeline and damage performance on the weak
memory model platforms, such like aarch64. Meanwhile update the shared
ring head and tail are observable and ordered between CPUs on IA.
Optimized this full barrier with the one-way barrier can improve the
throughput. On aarch64 n1sdp server this patch make testpmd throughput
boost 2.1%. On Intel E5-2640, testpmd got 3.98% performance gain.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
This patch updates the FW to 8.40.25.0 and corresponding base driver
changes. It also updates the PMD version to 2.11.0.1. The FW updates
consists of enhancements and fixes as described below.
- VF RX queue start ramrod can get stuck due to completion error.
Return EQ completion with error, when fail to load VF data. Use VF
FID in RX queue start ramrod
- Fix big receive buffer initialization for 100G to address failure
leading to BRB hardware assertion
- GRE tunnel traffic doesn't run when non-L2 ethernet protocol is
enabled, fix FW to not forward tunneled SYN packets to LL2.
- Fix the FW assert that is caused during vport_update when
tx-switching is enabled
- Add initial FW support for VF Representors
- Add ecore_get_hsi_def_val() API to get default HSI values
- Move following from .c to .h files:
TSTORM_QZONE_START and MSTORM_QZONE_START
enum ilt_clients
renamed struct ecore_dma_mem to phys_mem_desc and moved
- Add ecore_cxt_set_cli() and ecore_cxt_set_blk() APIs to set client
config and block details
- Use SET_FIELD() macro where appropriate
- Address spell check and code alignment issues
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update hardware software common base driver code in preparation to
update the firmware to version 8.40.25.0.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Move DMA engine (DMAE) structures from base driver to HSI module.
Use DMAE_PARAMS_* in place of ECORE_DMAE_FLAG_*.
Enforce SET_FIELD() macro where appropriate.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update and add runtime array offsets (rt defs), non-volatile memory
configuration options (nvm cfg) and management co-processor (mcp)
shared code in preparation to update the firmware to version 8.40.25.0.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Multiple flows can issue QM reconfiguration, hence hold the lock longer
to account for entire duration of reconfiguration flow.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
ecore_chain_set_prod/cons() sets the wrong page index in chains with
non-power of 2 page count. Fix ecore_chain_set_prod/cons() for PBL
chains with non power of 2 page count.
Calculate the right page index according to current indexes.
Fixes: ec94dbc57362 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Add support for creating/destroying fdir filter.
The filter rule includes LACP,ARP and ICMP packet type.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add support for creating/destroying ntuple filter.
The filter rule includes BGP and VRRP packet type.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch is to validate the filter rules, which includes
ntuple filter, ethertype filter and fdir filter. The packets
type that supported are BGP,VRRP,LACP,ARP and ICMP.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds fdir config operation, including set fdir filter,
normal filter, set and clear fdir tcam.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds unicast and multicast set interfaces.
Application can add or remove unicast MAC address, also can set
multicast MAC address, the maximum multicast list size is 2048.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When enable allmulticast mode, all multicast packets
can be received. This patch also adds support for MTU set,
the range of MTU is from 256 to 9600.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch introduces some HW interfaces required for SR-IOV function,
including: init hwdev, set port state, get default cos,
VF DMA attribute table, VF txrx flush and so on.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add mbox command channel for SR-IOV, which is used to
communicate between VF and VF, VF and PF. This patch
introduces data structures, initialization, interfaces
and commands of mbox channel.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
There is no need to assign return value to a temporary variable.
Instead return error directly in case of failure.
Fixes: 1fe427fd08ee ("net/bnxt: support enable/disable interrupt")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Driver issues hwrm_if_change when the port is started and stopped.
This command returns whether the fw has undergone a reset while port
was down. Fix to handle hwrm_if_change status during port start only.
Fixes: 0b533591238f ("net/bnxt: inform firmware about IF state changes")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Driver issues hwrm_if_change when the port is started. This command
returns whether the fw has undergone a reset while port was down and
driver does re-init of resources if fw has undergone a reset.
Fix to enable interrupts only after this check.
Fixes: c023cd5b2192 ("net/bnxt: fix async link handling and update")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
DPDK PCIe-VFIO framework configures base MSIX vector for interrupts
which is supported by other h/w. In case of bnxt, base MSIX vector
starts with the RX completion queue 0. To comply with the DPDK
framework We need to increase the map index by 1 so that RXTX
completion queues events can be delivered to appropriate event listeners
by kernel VFIO.
Fixes: bd0a14c99f65 ("net/bnxt: use dedicated CPR for async events")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In stop_op(), don't wait for link down event's ASYNC response from FW.
Fixes: c023cd5b2192 ("net/bnxt: fix async link handling and update")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The HWRM command timeout is set to a very high value.
VER_GET command response returns the default request timeout value.
Use this value for waiting for HWRM commands to complete.
Poll for the valid bit every 1us instead of 600us.
Fixes: cbcd375d37d2 ("net/bnxt: fix HWRM macros and locking")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
We are currently logging trusted VF information everytime a VF config
change is indicated by the async message. Update it only when new
setting is different from the current setting.
Fixes: b42c15c83e88 ("net/bnxt: support trusted VF")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
bnxt.h header includes bnxt_cpr.h and bnxt_util.h.
There is no need to include these headers file explicitly.
This commit does not cause any functional change.
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently bnxt driver does not return error in case setting link up fails.
Fixes: 5c206086feaa ("net/bnxt: add link state operations")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
If the VF resources need to be reconfigured using the
bnxt_hwrm_func_reserve_vf_resc, make sure that the default completion
ring is freed first before the resources are reserved.
Reallocate the ring once the VF resources are configured.
Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch fixes few checks and few return values while getting
and clearing device statistics.
1. Fixed to return standard error code.
2. Clubbed few error checks
3. Removed an unnecessary return check
Fixes: bfb9c2260be2 ("net/bnxt: support xstats get/reset")
Fixes: 88920136688c ("net/bnxt: support xstats get by id")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch add link related operations like
link update, up and down.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
To update MAC address or MTU, operations are
added to the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for supported packet types
by the platform andbasic statistics like
numbers of packets/bytes receive and transmit.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
HIF or host interface is responsible for transmit
and receive packets between physical ethernet
interfaces and HIF library defined logical interfaces.
This patch initialise that host interface and MAC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add some hardware specific macros
and functions that will be used by the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
