This minor patch fixes unused variable ‘ret’ compile error When
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC was selected.
Fixes: 6f51deb903b2 ("app/testpmd: check status of getting ethdev info")
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
port reset cause crash when ports are not stopped. Fixed by refusing the
reset when port is not stopped.
Fixes: 97f1e196799f ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/test-pmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a wrapper for rte_eth_macaddr_get() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get_nowait() was changed from void to int.
Update the usage of the function according to the new return type.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a wrapper for rte_eth_eth_link_get_nowait() that prints an
error and returns a status code if the function fails.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_xstats_reset() return value from void to int and
return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across apps according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across app/testpmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so modify usage of these
functions across lib/librte_kni according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_info_get() return value was changed from void to int, so
this patch modify rte_eth_dev_info_get() usage across apps
according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add eth_dev_info_get_print_err() which is a wrapper for
rte_eth_dev_info_get() printing error if rte_eth_dev_info_get()
fails and returning its status code.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_eth_dev_info_get() always fills in device information memory
with zeros on entry.
Fixes: b6719879855d ("ethdev: avoid getting uninitialized info for bad port")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Now that the necessary function is exported from the fpga_lte_fec driver,
we can enable the code paths using it in shared-library builds.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
The fpga_lte_fec is the only bbdev driver that does not use bbdev in the
name, so modify it to keep consistency with the other bbdev drivers. This
will then allow later simplification due to all drivers using the same
basic naming format.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds 256-bit AES GCM tests for QAT PMD
(which already existed for AESNI and OpenSSL) and also adds
a number of negative unit tests for AES GCM for QAT PMD, in order
to verify authenticated encryption and decryption with modified data.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Segmented frames not supported for out-of-place case.
This patch returns err if such config is requested.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Negative cases with wrong cipher/auth text added
to dpaa_sec and dpaa2_sec PMD test suites.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In some of the cases, the test is looking for a specific
failure returned from the CryptoDev. Not all cryptodev
support returning specific errors.
This patch changes such checks to NOT-SUCCESS
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
SNOW and ZUC plain crypto operations for cipher only
and auth only are now supported in dpaa2_sec.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Test cases for PDCP with scattered input and output
buffers are added for both inplace and out of place scenarios.
1. input SG - output non SG
2. input and output both SG and inplace buffers
3. input and output both SG with different segment sizes
4. input SG and output non-SG
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add test cases for user plane PDCP
5/7/12/15/18 bit SN test cases for decapsulation of
cipher only and 12/18 bit for cipher + integrity
for all algo combinations.
Test vectors are reused from the encap cases
by swapping the input and output data.
The case are added to DPAA_SEC and DPAA2_SEC
testsuite.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
PDCP User/Data plane can optionally support integrity
along with confidentiality.
This patch add test cases and test vectors for all
supported algos combos for cipher+integrity for 12
and 18bit SN.
The test cases are added in DPAA_SEC and DPAA2_SEC
test suite as a reference.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
PDCP User/Data plane can support 5/7/12/15/18 bit
sequence number. This patch add test cases and test
vectors for all supported algos for cipher only.
(NULL, AES, SNOW, ZUC ciphers)
The test cases are added in DPAA_SEC and DPAA2_SEC
test suite as a reference.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add test cases for control plane PDCP
5 and 12 bit SN test cases for decapsulation of
cipher+integrity for all algo combinations
Test vectors are reused from the encap cases
by swapping the input and output data.
The case are added to DPAA_SEC and DPAA2_SEC testsuite.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
PDCP control plane can support 5 bit and 12 bit
sequence number. This patch add test cases and test
vectors for all supported algo combinations of cipher+integrity
(NULL+NULL, NULL+AES, NULL+SNOW, NULL+ZUC,
AES+NULL, AES+SNOW, AES+AES, AES+ZUC,
SNOW+NULL, SNOW+AES, SNOW+SNOW, SNOW+ZUC,
ZUC+NULL, ZUC+AES, ZUC+SNOW, ZUC+ZUC).
The test cases are added in DPAA_SEC and DPAA2_SEC
test suite as a reference.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch adds new performance measurement option --external-mbufs
that allocates and uses memzones as external buffers instead of
putting the data directly inside mbufs.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Adds a new test to verify external buffer in mbuf APIs.
Initialize fields in test_data_params structures by name
for better readability.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds two new tests that cover the stateful
decompression feature.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
One issue caught by Coverity 344984
*overrun-local: Overrunning array cperf_test_type_strs of 2 8-byte elements
The array cperf_test_type_strs defined in app/test-compress-perf conflicts
with the same name being defined in app/test-crypto-perf. Due to which
coverity reports error.
The fix is to rename "cperf_test_type_strs" into "comp_perf_test_type_strs"
in app/test-compress-perf to avoid name confusion.
Coverity issue: 344984
Fixes: 424dd6c8c1 ("app/compress-perf: add weak functions for multicore test")
Fixes: 1a9b0f3504 ("app/compress-perf: add --ptest option")
Fixes: 424dd6c8c1 ("app/compress-perf: add weak functions for multicore test")
Cc: stable@dpdk.org
Signed-off-by: Lavanya Govindarajan <lavanyax.govindarajan@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
armv8 cryptodev virtual PMD autotest failed with output:
CRYPTODEV: [CRYPTODEV_NAME_ARMV8_CRYPTO_PMD]
armv8_crypto_pmd_qp_create_processed_ops_ring() line 210:
Unable to reuse existing ring armv8_crypto_pmd_0_qp_0 for processed ops
CRYPTODEV: rte_cryptodev_stop() line 942:
Device with dev_id=0 already stopped
+ TestCase [ 0] : test_AES_chain_armv8_all failed
This is due to the ring size used in ut_setup is bigger than that used
in testsuite_setup.
Fix this issue by enlarge ring size used in testsuite_setup accordingly.
Fixes: 24054e3640a2 ("test/crypto: use separate session mempools")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
This patch fixes the return value of the test_deflate_comp_decomp
function on capabilities retrieval error to be -ENOTSUP.
It also fixes passing of the test_deflate_comp_decomp function's
return value to the upper level (as the test suite function return
value).
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
This patch fixes the floating point exception that happened
when the number of cores to be used during the benchmark
was zero. After the fix such situation is detected, the error
message is printed and the benchmark application exits.
Fixes: 424dd6c8c1a8 ("app/compress-perf: add weak functions for multicore test")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
This patch fixes the memory deallocation issue which happened
after unsuccessful allocation (e.g. due to the out of memory)
and produced the segmentation fault.
Fixes: 424dd6c8c1 ("app/compress-perf: add weak functions for multicore test")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Restrict this header inclusion to its real users.
Fixes: 028669bc9f0d ("eal: hide shared memory config")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Because the eal interrupt framework can race when invoking the callback
and a separate unregister call, the test needs to accommodate the chance
that the two collide. Do this by checking the return value of unregister
against the race-condition flag (EAGAIN).
Fixes: f1a6c22424ce ("app/test: update interrupts test")
Cc: stable@dpdk.org
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The testpmd application provides two sets of commands for RX offload
flags configuration. The purpose of this patch is to eliminate this
duplication by removing the old set of commands:
“port config all crc-strip|scatter|rx-cksum|rx-timestamp|hw-vlan|
hw-vlan-filter|hw-vlan-strip|hw-vlan-extend on|off”
The other commands set that can be used instead in order to enable
or disable the same RX offloading flags on all RX queues of a port is:
"port config <port_id> rx_offload crc_strip|scatter|ipv4_cksum|
udp_cksum|tcp_cksum|timestamp|vlan_strip|vlan_filter|vlan_extend on|off"
This patch also fixes the "drop-en" command, which enables packets
dropping on all RX queues of all ports when no receive buffers available
“port config all drop-en on|off”
Fixes: 384161e00627 ("app/testpmd: adjust on the fly VLAN configuration")
Cc: stable@dpdk.org
Signed-off-by: Flavia Musatescu <flavia.musatescu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
It's possible that the mcsunlock occurs before the test_mcslock_try has
a chance to execute, which will result in the trylock being successful,
making the test case fail. Fix this by waiting until all lcores have
completed their test before unlocking the master lock.
Fixes: 32dcb9fd2a22 ("test/mcslock: add MCS queued lock unit test")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
On receiving signal, testpmd showing warning as
"LATENCY_STATS: failed to remove Rx/Tx callback"
because rte_latencystats_uninit is called without
checking if latencystats is enabled or not.
After this fix, rte_latencystats_uninit will be
called only if latencystats is enabled.
Fixes: 62d3216d6194 ("app/testpmd: add latency statistics calculation")
Cc: stable@dpdk.org
Signed-off-by: Amit Gupta <agupta3@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Returned value from rte_bbdev_enc_op_alloc_bulk not checked consistently.
Coverity issue: 344986
Fixes: d819c08327f3 ("app/bbdev: update for 5GNR")
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
rte_panic causes a backtrace (which is uniformative since all
these calls are in main). Instead use rte_exit and try and make the
messages informative.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since testpmd has several issues which keep it from working correctly
as a secondary process; abort if user tries to do it, rather than
running into later problems.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since testpmd registers log type after processing command
line arguments, it is not possible to do:
# testpmd --log-level='testpmd:info' ...
Fix this by initializing logtype first.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
There should not be blank lines at end of files.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
