It's there, so we might as well use it. Some operations will be
sped up by that.
Since we have to allocate an fbarray for memzones, we have to do
it before we initialize memory subsystem, because that, in
secondary processes, will (later) allocate more fbarrays than the
primary process, which will result in inability to attach to
memzone fbarray if we do it after the fact.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
We already set IOVA addresses of memsegs and memzones to VA
address during initialization, so we don't need to check
whether we're in RTE_IOVA_VA mode anywhere else.
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an RehiveTech copyright on them.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
If start is set and a device before it matches the data,
this device is returned.
Fixes: c7fe1eea8a ("bus: simplify finding starting point")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Move commonly used functions across mempool, event and net devices to a
common folder in drivers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Add driver/common folder and skeleton makefile for adding commonly used
functions across mempool, event and net devices.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Since we have support for the strlcpy function in DPDK, replace all
instances where a string is copied using snprintf.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Digest and IV length variable declarations have changed.
These were escaping builds as the debugging macro was disabled.
During dynamic logging change, they were discoverd.
Fixes: 0fbd75a99f ("cryptodev: move IV parameters to session")
Fixes: 7f0034275a ("cryptodev: remove digest length from crypto op")
Cc: stable@dpdk.org
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Some changes had already been pushed via SHA:72654f090a11 patch. This
patch updates them.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
When creating vdev dynamically, vhost pmd driver starts directly without
checking TX/RX queues are ready or not, and thus causes segmentation fault
when vhost library accesses queues. This patch adds a flag to check whether
queues are setup or not, and adds queues setup into dev_start function to
allow user to start them after setting up.
Fixes: aed0b12930 ("net/vhost: fix socket file deleted on stop")
Cc: stable@dpdk.org
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Tested-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This fix is to remove primary MAC filter during dev stop. Without the
fix device start attempt to add the primary MAC fails. Perform MAC set
remove under IS_PF() check.
Fixes: dd28bc8c6e ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Ethdev RX/TX offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This patch makes use of new offload flags as suggested and fix
the default RX/TX configuration. Also indent the code properly
around those changes.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Medford2 uses a configurable VI window size, and requires
updates to register accesses to use a runtime VI window size
rather than the *_STEP register constants used for earlier
controllers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Intention of the logic is:
If ETH_LINK_SPEED_FIXED is set in dev_conf, set link_autoneg to
ETH_LINK_FIXED, else set it to ETH_LINK_AUTONEG
ETH_LINK_SPEED_FIXED value is 1, and ETH_LINK_FIXED is 0;
Current logic is broken, fix it according above values.
Fixes: 48de41ca11 ("net/avf: enable link status update")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
