Drivers should only log with their assigned logtype, not with the
generic PMD log type.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Be consistent with usage in other drivers.
No need for snowflake drivers.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The PMD_INIT_LOG macro always adds a newline, and other drivers version
of PMD_DRV_LOG always adds a newline. Therefore change nfp driver
to be consitent with others.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The NFP driver init messages would come out under PMD not net.pmd.nfp.init.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
PMDs have the responsibility of releasing mbufs sent through xmit burst
function. NFP PMD attaches those sent mbufs to the TX ring structure,
and it is at the next time a specific ring descriptor is going to be
used when the previous linked mbuf, already transmitted at that point,
is released. Those mbufs belonging to a chained mbuf got its own link
to a ring descriptor, and they are released independently of the mbuf
head of that chain.
The problem is how those mbufs are released when the PMD is stopped or
closed. Instead of releasing those mbufs as the xmit functions does,
this is independently of being in a mbuf chain, the code calls
rte_pktmbuf_free which will release not just the mbuf head in that
chain but all the chained mbufs. The loop will try to release those
mbufs which have already been released again when chained mbufs exist.
This patch fixes the problem using rte_pktmbuf_free_seg instead.
Fixes: b812daadad ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This patch allows to use another MAC address than the one coming
with the NIC by default.
The change requires to tell the vNIC after writing into the port
BAR space. The change will fail if the port is enabled and the
vNIC does not support a live address change.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Duplicated includes are found with devtools/check-dup-includes.sh
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Chained metadata instead of prepend metadata was added in
firmware version 4. However, it could be old firmwares evolving
but not supporting chained metadata.
This patch adds support for an old firmware being updated and
getting a firmware version number higher than 4, but it still not
implementing chained metadata.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This new LSO offload version facilitates how firmware implements
this functionality and helps improving the performance.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In next 18.05 the old hw offload API will be removed. This patch adds
support for just the new hw offload API.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
PF PMD support was based on NSPU interface. This patch changes the
PMD for using the new CPP user space interface which gives more
flexibility for adding new functionalities.
This change just affects initialization with the datapath being the
same than before.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
CPP refers to the internal NFP Command Push Pull bus. This patch allows
to create CPP commands from user space allowing to access any single
part of the chip.
This CPP interface is the base for having other functionalities like
mutexes when accessing specific chip components, chip resources management,
firmware upload or using the NSP, an embedded arm processor which can
perform tasks on demand.
NSP was the previous only way for doing things in the chip by the PMD,
where a NSPU interface was used for commands like firmware upload or
port link configuration. CPP interface supersedes NSPU, but it is still
possible to use NSP through CPP.
CPP interface adds a great flexibility for doing things like extended
stats or firmware debugging.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mixing numeric macros with bit shifts macros is not a good idea.
Fixes: 011411586e ("net/nfp: extend speed capabilities advertised")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The barrier needs to be after reading the DD bit. It has not been
a problem because the potential reads which can not happen before
reading the DD bit seem to be far enough, so the compiler is not
rescheduling them. However, a refactoring could make this problem
to arise.
Fixes: b812daadad ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Although this can be done by the app, because other PMDs are doing it,
apps expect this behaviour from the PMD.
Fixes: b812daadad ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad0 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some apps can enable RSS but not update the reta table nor the hash.
This patch adds a default reta table setup based on total number of
configured rx queues. The hash key is dependent on how the app
configures the rx_conf struct.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
NFP does CRC strip by default and it is not configurable. But, even
if an app requests not to do it, that should not be a reason for PMD
configuration failure.
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When jumbo frames is configured, the hardware mtu needs to be updated to
the specified max_rx_pkt_len. Also, changing mtu should be avoided once
the PMD port started.
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The wrong mtu length was used for configuring the hardware. The
max_rx_pktlen reported was also wrong.
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Memory allocated was not being released in any exit path.
Coverity issue: 195030
Fixes: 48e2255f1b ("net/nfp: add NSP support for HW link configuration")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
First, the received pointer was not checked before. Then the pointer
from malloc was not the one used in the existing check.
Coverity issue: 195027
Fixes: ad60bca348 ("net/nfp: read PF port MAC addr using NSP")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
We do not know how big can the BAR be, but we know anything less
than 1MB is an error. This BAR needs to be big enough for accessing
most of NFP internals.
Coverity issue: 195024
Fixes: d12206e005 ("net/nfp: add NSP user space interface")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The fstat function could return a value that indicates an error condition.
If this is not checked, the error condition may not be handled correctly.
Coverity issue: 195019
Fixes: f37d8a4b67 ("net/nfp: add NSP FW upload command")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
File descriptor is not released in any potential exit path
inside the function.
Coverity issue: 195018
Fixes: f37d8a4b67 ("net/nfp: add NSP FW upload command")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
If the function actually returns a null value, a null pointer
dereference will occur.
Coverity issue: 195013
Fixes: dd63df2bff ("net/nfp: add NSP symbol resolution command")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Not all struct fields will be written and random data could
confuse readers.
Coverity issue: 140755
Fixes: 92aa491b88 ("nfp: add statistics")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
PF multiport support has some limitations like not allowing plugging or
unplugging of single ports as they all belong to same PCI device.
A previous patch for removing detachable flag introduced a wrong check.
Fixes: 00a3d8104a ("ethdev: remove detachable device flag")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
VFs rely on config BAR for getting the MAC address, although a
random one is created a valid address is not found.
A PF port has a fixed MAC which is currently acquired using the NSPU
interface. Some NFP firmwares require the MAC being writing back
to the config BAR for doing proper MAC filtering.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
These capabilities are enabled in current NFP firmwares by
default, but it could be they are not with NFP firmwares to come.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
