Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
coverity complains about a null-termination after a read,
so we terminate once we exit the do-while read loop.
Coverity issue: 337680
Fixes: a63504a90f ("examples/power: add JSON string handling")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
After the read() the jason_data null termination is missing
for the case "indent < 0", for "indent > 0" and "indent == 0"
cases null termination is already handled.
So add the missing case "indent < 0" to the existing "indent == 0"
case to fix null termination.
Coverity issue: 337680
Fixes: a63504a90f ("examples/power: add JSON string handling")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Removed dependency to mac_list from policies:
* BRANCH_RATIO,
* WORKLOAD,
* TIME
in function update_policy.
Fixes: 1b897991473f ("power: update error handling")
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Tested-by: Yufeng Mo <yufengx.mo@intel.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Update for handling negative returned status from functions
call.
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch fixes a bug introduced in the 64-core limitation
enhancement where the core_id is inadvertently converted from
virtual to physical even though it may already be a physical
core_id.
We should be using the core_type field, and only converting via
hypervisor when core_type is set to CORE_TYPE_VIRTUAL
Fixes: 5776b7a371d1 ("examples/power: allow VM to use lcores over 63")
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Lei Yao <lei.a.yao@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Extending the functionality to allow vms to power manage cores beyond 63.
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since we're moving to allowing greater than 64 cores, the mask functions
that use uint64_t to perform functions on a masked set of cores are no
longer needed, so removing them.
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Some messages appearing several times a second, removing as they are
unnecessary. Other less severe messages change from INFO to DEBUG
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add JSON string handling to vm_power_manager for JSON strings received
through the fifo. The format of the JSON strings are detailed in the
next patch, the vm_power_manager user guide documentation updates.
This patch introduces a new dependency on Jansson, a C library for
encoding, decoding and manipulating JSON data. To compile the sample app
you now need to have installed libjansson4 and libjansson-dev (these may
be named slightly differently depending on your Operating System)
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Now that we're handling host policies, containers and virtual machines,
we'll rename MAX_VMS to MAX_CLIENTS, and increase from 4 to 64
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch adds a fifo channel to the vm_power_manager app through which
we can send commands and polices. Intended for sending JSON strings.
The fifo is at /tmp/powermonitor/fifo
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Previously the vm_power_manager app required to have some vms defined, so
the call to get_all_vm() always set the noVms variable. Now we're accepting
policies from the host OS (without any VMs defined), so it is now valid to
have zero VMs. This patch initialises the relevant variables to zero just
in case the call to get_all_vms() does not find any, so could return with
the variables uninitialised.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add the capability for the vm_power_manager to receive
a policy of type BRANCH_RATIO. This will add any vcpus
in the policy to the oob monitoring thread.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
A delay in the loop waiting for the virtio-serial commands in the
vm_power_manager app was causing a lag in the response time. This was
set to 1 second, and has now been changed to 1ms.
Fixes: f14791a8126e ("examples/vm_power_mgr: add policy to channels")
Signed-off-by: David Hunt <david.hunt@intel.com>
Remove variable declaration from within for loop.
Fixes: f14791a8126e ("examples/vm_power_mgr: add policy to channels")
Signed-off-by: David Hunt <david.hunt@intel.com>
Add extra commands to command line to allow enable/disable of
per-core turbo.
When a core has turbo enabled, calling for max frequency will allow it to
go to a turbo frequency (P0n).
When a core has turbo disabled, calling for max frequency will allow it to
go to the maximum non-turbo frequency (P1), but not beyond.
Signed-off-by: David Hunt <david.hunt@intel.com>
The file rte_config.h is automatically generated and included.
No need to #include it.
The example performance-thread needs a makefile fix to avoid
overwriting the default cflags.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
The manager is responsible for adding communications channels to the Monitor
thread, tracking and reporting VM state and employs the libvirt API for
synchronization with the KVM Hypervisor. The manager interacts with the
Hypervisor to discover the mapping of virtual CPUS(vCPUs) to the host
physical CPUS(pCPUs) and to inspect the VM running state.
The manager provides the following functionality to the CLI:
1) Connect to a libvirtd instance, default: qemu:///system
2) Add a VM to an internal list, each VM is identified by a "name" which must
correspond a valid libvirt Domain Name.
3) Add communication channels associated with a VM to the epoll based Monitor
thread.
The channels must exist and be in the form of:
/tmp/powermonitor/<vm_name>.<channel_number>. Each channel is a
Virtio-Serial endpoint configured as an AF_UNIX file socket and opened in
non-blocking mode.
Each VM can have a maximum of 64 channels associated with it.
4) Disable or re-enable VM communication channels, channels once added to the
Monitor thread remain in that threads control, however acting on channel
requests can be disabled and renabled via CLI.
The monitor is an epoll based infinite loop running in a separate thread that
waits on channel events from VMs and calls the corresponding functions. Channel
definitions from the manager are registered via the epoll event opaque pointer
when calling epoll_ctl(EPOLL_CTL_ADD), this allows for obtaining the channels
file descriptor for reading EPOLLIN events and mapping the vCPU to pCPU(s)
associated with a request from a particular VM.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
