This command will simulate the process of setting the
eth-peer from command line.
It will be useful to perform extra testing.
usage:
testpmd> set eth-peer <port_id> <peer_addr>.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since testpmd is now using the new Ethdev offloads API and there is
a way configure each of the tx offloads from CLI or command line,
there is no need for the txqflags configuration anymore.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds command line option to set hex value for the ports Tx
offloads flags.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, especially when
multi-queue is enabled.
Added an option to set whether zero values should be displayed
or not for xstats. The "set xstats-hide-zero on|off" command enables
the user to decide if the zero values should be shown while
displaying xstats.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch add a API configuration of queue region in rss.
It can parse the parameters of region index, queue number,
queue start index, user priority, traffic classes and so on.
According to commands from command line, it will call i40e
private API and start the process of set or flush queue region
configure. As this feature is specific for i40e, so private API
will be used. Aslo add a document for these new commands.
Queue region only support PF by now, so this document is
only for configuration of queue region on PF port.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
This commit extends the testpmd application with new forwarding engine
that demonstrates the use of ethdev traffic management APIs and softnic
PMD for QoS traffic management.
In this mode, 5-level hierarchical tree of the QoS scheduler is built
with the help of ethdev TM APIs such as shaper profile add/delete,
shared shaper add/update, node add/delete, hierarchy commit, etc.
The hierarchical tree has following nodes; root node(x1, level 0),
subport node(x1, level 1), pipe node(x4096, level 2),
tc node(x16348, level 3), queue node(x65536, level 4).
During runtime, each received packet is first classified by mapping the
packet fields information to 5-tuples (HQoS subport, pipe, traffic class,
queue within traffic class, and color) and storing it in the packet mbuf
sched field. After classification, each packet is sent to softnic port
which prioritizes the transmission of the received packets, and
accordingly sends them on to the output interface.
To enable traffic management mode, following testpmd command is used;
$ ./testpmd -c c -n 4 --vdev
'net_softnic0,hard_name=0000:06:00.1,soft_tm=on' -- -i
--forward-mode=tm
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds GSO support to the csum forwarding engine. Oversized
packets transmitted over a GSO-enabled port will undergo segmentation
(with the exception of packet-types unsupported by the GSO library).
GSO support is disabled by default.
GSO support may be toggled on a per-port basis, using the command:
"set port <port_id> gso on|off"
The maximum packet length (including the packet header and payload) for
GSO segments may be set with the command:
"set gso segsz <length>"
Show GSO configuration for a given port with the command:
"show port <port_id> gso"
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The GRO library provides two modes to reassemble packets. Currently, the
csum forwarding engine has supported to use the lightweight mode to
reassemble TCP/IPv4 packets. This patch introduces the heavyweight mode
for TCP/IPv4 GRO in the csum forwarding engine.
With the command "set port <port_id> gro on|off", users can enable
TCP/IPv4 GRO for a given port. With the command "set gro flush <cycles>",
users can determine when the GROed TCP/IPv4 packets are flushed from
reassembly tables. With the command "show port <port_id> gro", users can
display GRO configuration.
The GRO library doesn't re-calculate checksums for merged packets. If
users want the merged packets to have correct IP and TCP checksums,
please select HW IP checksum calculation and HW TCP checksum calculation
for the port which the merged packets are transmitted to.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
We remove xen-specific code in EAL, including the option --xen-dom0,
memory initialization code, compiling dependency, etc.
Related documents are removed or updated, and bump the eal library
version.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
DPDK has support for both sw and hw mempool and
currently user is limited to use ring_mp_mc pool.
In case user want to use other pool handle,
need to update config RTE_MEMPOOL_OPS_DEFAULT, then
build and run with desired pool handle.
Introducing eal option to override default pool handle.
Now user can override the RTE_MEMPOOL_OPS_DEFAULT by passing
pool handle to eal `--mbuf-pool-ops-name=""`.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add new commands to manipulate with dynamic flow type to
pctype mapping table in i40e PMD.
Commands allow to print table, modify it and reset to default value.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There were mising :: so file was parsed in wrong way
Fixes: c735b831b0c1 ("app/testpmd: add cmd for dedicated LACP Rx/Tx queues")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Providing this parameter requests flow API isolated mode on all ports at
initialization time. It ensures all traffic is received through the
configured flow rules only (see flow command).
Ports that do not support this mode are automatically discarded.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch enables TCP/IPv4 GRO library in csum forwarding engine.
By default, GRO is turned off. Users can use command "gro (on|off)
(port_id)" to enable or disable GRO for a given port. If a port is
enabled GRO, all TCP/IPv4 packets received from the port are performed
GRO. Besides, users can set max flow number and packets number per-flow
by command "gro set (max_flow_num) (max_item_num_per_flow) (port_id)".
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Add new command to support enable/disable of dedicated Tx/Rx queue on
each slave of a bond device for LACP control plane traffic.
set bonding lacp dedicated_queues <port_id> [enable|disable]
When enabled this option creates dedicated queues on each slave device
for LACP control plane traffic. This removes the need to filter control
plane packets in the data path.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
New command 'ddp del (port) (profile_path)' removes previously
loaded profile and deletes it from the list of the loaded profiles.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch demonstrates how to get information about dynamic device
personalization (DDP) profile.
Command 'ddp get info (path_to_profile)' extracts and prints
information about the given profile.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add parameter to print port statistics periodically
(disabled by default), if interactive mode is not enabled.
This is useful to allow the user to see port statistics
without having to get into the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add parameter to start forwarding sending first
a burst of packets, which is useful when testing
a loopback connection.
This was already implemented as an internal command,
but adding it as a parameter is interesting, as it
allows the user to test a loopback connection without
entering in the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add new meta pattern item RTE_FLOW_TYPE_ITEM_FUZZY in flow API.
This is for device that support fuzzy match option.
Usually a fuzzy match is fast but the cost is accuracy.
i.e. Signature Match only match pattern's hash value, but it is
possible that two different patterns have the same hash value.
Matching accuracy level can be configured by subfield threshold.
Driver can divide the range of threshold and map to different
accuracy levels that device support.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Isolated mode can be requested by applications on individual ports to avoid
ingress traffic outside of the flow rules they define.
Besides making ingress more deterministic, it allows PMDs to safely reuse
resources otherwise assigned to handle the remaining traffic, such as
global RSS configuration settings, VLAN filters, MAC address entries,
legacy filter API rules and so on in order to expand the set of possible
flow rule types.
To minimize code complexity, PMDs implementing this mode may provide
partial (or even no) support for flow rules when not enabled (e.g. no
priorities, no RSS action). Applications written to use the flow API are
therefore encouraged to enable it.
Once effective, leaving isolated mode may not be possible depending on PMD
implementation.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adds the "all" option to the print-event and mask-event parameters. This
option will enable or disable all event notifications from being
displayed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add two parameters to testpmd:
--print-event <event name>
--mask-event <event name>
To enable or disable to printing of events. This display is configured
on a per-event basis. By default, all except VF_MBOX are displayed.
Fixes: 76ad4a2d82d4 ("app/testpmd: add generic event handler")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Stop port before enabling QinQ.
Add commands to set inner and outer TPID's and start port.
Remove TPID's from flow validate and and flow create commands.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Adds support to testpmd to load a set of cmdline CLI commands at runtime.
This can be helpful when needing to cut-n-paste many commands where
cut-n-paste may not be practical.
testpmd> load /home/ubuntu/somefile.txt
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Adds support to testpmd to load a set of cmdline CLI commands at startup.
This can be helpful when needing to cut-n-paste many commands each time
testpmd is restarted. This option will work in both interactive and
non-interactive modes.
./testpmd -n4 -c3 ... -- --cmdline-file=/home/ubuntu/somefile.txt
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Bit-rate collation should only be done by one core. This patch adds
an option to select which core performs the bit-rate calculation,
which is also disabled by default.
Fixes: 7e4441c8efb9 ("app/testpmd: add bitrate statistics calculation")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
E-Tag and NVGRE pattern items have been added hastily without updating
documentation nor testpmd.
This commit also adds default masks for these items based on the ixgbe
implementation.
Fixes: 99e7003831c3 ("net/ixgbe: parse L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There is little reason for NUMA support in testpmd to be off by default, so
enable it, and add in a new commandline parameter to disable it, if that is
wanted by users.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add information on validating and creating QinQ flow rules to
the flow rules management section of the Testpmd User Guide.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add a section in NIC drivers documentation to explain compiling and
testing of a PMD. It also mentions about host setup, which is required
before running testpmd.
Add label "testpmd_ug" to refer user guide.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
app's rxmode, VF driver will report the VF launch failure. So this
patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add a CLI in testpmd to test the TC min bandwidth
setting.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch exposes the following item fields through the flow command:
- MPLS label
- GRE protocol
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add a CLI to set some TCs' strict link priority mode
on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific TC's max bandwidth
on a specific VF from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set TCs' min bandwidth on a specific VF
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific VF's TX max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The coremask option in DPDK is difficult to use and we should be
promoting the use of the corelist (-l) option. The patch
adjusts the docs to use -l EAL option instead of the -c option.
The patch only changes the docs and not the code as the -c option
will continue to exist unless it is removed in the future. The -c
option should be kept to maintain backward compatibility.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
