Adds admin q function for "Set Wake on LAN Filter AQ"
and "Get Wake Up Reason AQ".
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add AQ functions to handle RSS Key and LUT programming.
This is needed for FortPark RSS support.
FortPark has additional PCTYPES supported for RSS
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds registers and bit field definitions specific to FortPark.
Most of these new registers are related to PE (IWARP), Reset, NVM, RSS
and ATR changes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This is to allow quick check for FCoE capability is enabled or not
in device function before any SW overrides.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The i40e_add_pd_table_entry() routine is being modified to handle both
cases where a backing page is passed and where backing page is allocated
in i40e_add_pd_table_entry().
For pble resource management, it is more efficient for it to manage its
backing pages. For VF, pble backing page addresses will be send to PF
driver for pble resource.
The i40e_remove_pd_bp() is also modified to not free pre-allocated pages and
free only ones which were allocated in i40e_add_pd_table_entry().
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The firmware has added additional status information to allow software
to determine if the APP priority for FCoE/iSCSI/FIP is valid or not in
CEE DCBX mode.
This patch adds to support those additional checks and will only add
applications to the software table that have oper and sync bits set
without any error.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
In order to support some extra Solaris features the Solaris VF drivers need
additional configuration data from the PF that aren't provided with the current
virtual channel commands.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The struct i40e_aqc_get_cee_dcb_cfg_v1_resp was originally defined with
word boundary layout issues, which most compilers deal with by silently
adding padding, making the actual struct larger than designed.
This patch adds an extra byte in fields reserved3 and reserved4 to directly
acknowledge that padding.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The assignments of addr_high and addr_low were not only wrong because
they were assigning virtual addresses to a hardware accessed variable,
but they were shortly thereafter overwritten by the send_asq_command
call with a non-NULL third argument (buffer) with correctly formatted
data.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Use INLINE macro for better cross-platform code management.
Clean up some unnecessary logic jumping and drop a variable.
There was one more __FUNCTION__ reference that wasn't needed.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add the new Port link status bit and rename the link status to function
link status.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The change is to explicitly assign enum index for each VSI type
so that PF and VF always reference to the same VSI type even if the
enum lists are different.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This will help us avoid a whole bunch of log messages when the driver
is running.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The Flex10 device/function capability has been upgraded to revision 2
to include information needed to support Flex-10 DCC and DCI
configurations. This patch adds new fields to the i40e_hw_capabilities
structure and updates i40e_parse_discover_capabilities functions to
extract them from the AQ response. Naming convention has changed to use
flex10 mode instead of existing mfp_mode_1.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds capability to query and store the CEE DCBX DesiredCfg
and RemoteCfg data from the LLDP MIB.
Added new member "desired_dcbx_config" in the i40e_hw data structure
to hold CEE only DesiredCfg data.
Store the CEE TLV status returned by firmware to allow drivers to dump that
for debug purposes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Remove unused members in the PHY structure and add a new member to store
all the capabilities the PHY has as reported by the FW. This information will
help us determine what speeds the device is capable of when link is
down.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch prepares the LLDP MIB in IEEE TLV format based on
the local dcb config.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds parsing for CEE DCBX TLVs from the LLDP MIB.
While the driver gets the DCB CEE operational configuration from Firmware
using the "Get CEE DCBX Oper Config" AQ command there is a need to get
the CEE DesiredCfg Tx by firmware and DCB configuration Rx from peer; for
debug and other application purposes.
Also gets rid of unused locals variables.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Use macros for abstracting (1 << foo) to BIT(foo)
and (1ULL << foo64) to BIT_ULL(foo64) in order to match
better with linux kernel requirements.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
With latest LANconf and NVMupdate tools, pf_reset failed due to Firmware not
being ready, so this patch increases I40E_PF_RESET_WAIT_COUNT to 200, using
original value defined for A0 silicon, in order to make sure that FW is ready.
Test result indicates that firmware became ready at the loop count of 114.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
There were quite a few issues when the wrong defines were getting used
in the VF driver. This patch defines a new #define PF_DRIVER.
All the PF specific register definitions are wrapped in it.
The drivers will have to be updated to use the define in the PF
driver builds. Makes for a very short register.h for VF drivers.
Also fixes the code where PF driver register fields were getting used for
VF driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
To prepare for the changes coming up in the X722 device and future
devices, the virtual channel interface has to change slightly. The VF
driver can now report what its capable of supporting, which then informs
the PF driver when it sends the configuration information back to the
VF.
A 1.1 VF driver on a 1.0 PF driver should not send its capabilities.
Likewise, a 1.1 PF driver controlling a 1.0 VF driver should not expect
or depend upon receiving the VF capabilities.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds support for "Debug Dump Internal Data" AQ command.
It is used to dump internal firmware or hardware data for debug
purposes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds a workaround to drop any flow control frames from being
transmitted from any VSI. FW can still send Flow control frames if Flow
control is enabled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
NFV use cases require the ability to steer packets to VSIs by VLAN tag
alone while being in promiscuous mode for multicast and unicast MAC
addresses. These two new functions support that ability.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds a member to the nvm_info struct for oem_ver info to be
output either by OID or ethtool.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
There are some rare cases where the release resource call will return an
admin Q timeout. In these cases the code needs to try to release the
resource again until it succeeds or it times out.
Also add little endian conversion for checksum
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add a new GetStatus command so that the NVM update tool can query
the current status instead of doing fake write requests to probe for
readiness.
Add a facility to run AQ commands through the nvmupdate utility in order
to allow the update tools to interact with the FW and do special
commands needed for updates and configuration changes.
Add a facility to recover the result of a previously run AQ command.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This adds wait states to the NVM update state machine to signify when
waiting for an update operation to finish, whether we're in the middle
of a set of Write operations, or we're now idle but waiting.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
This patch adds support for AQ commands related to Tx scheduling.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add the ability to save the AdminQ write back descriptor. If the writeback
descriptor buffer was previously created, this gives it to the AQ command
request to be used to save the results.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Make sure we have the spinlocks before we clear the ARQ and ASQ management
registers. Also, widen the locked portion and make a sanity check earlier
in the send function to be sure we're working with safe register values.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add a module_types variable to the link_info struct to save the module
information from get_phy_capabilities. This information can be used to
determine which speeds the module supports.
Also add a new function update_link_info which updates the module_types
parameter and then calls get_link_info. This function should be called
in place of get_link_info so that the module_types variable stays
up-to-date with the rest of the link information.
Also rework the function get_link_status to allow caller to get all
return values in the call chain bubbled back to the source, which keeps
information about failures from being lost.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Update the admin queue command header for the Fortville SW 4 Release. As
part of this release the minor FW API version number is bumped to 4 so
that the FW API version for the FVLSW4 release will now be 1.4.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Replace sprintf with i40e_debug.
Pad the line out with zeros to get to 16 bytes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
The error code sent into i40e_aq_rc_to_posix() are signed values, so we
really need to treat them as such.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Add status value to string decoding routines to be used in error reporting
in order to give more readable error messages rather than bare error
numbers. This decodes both the i40e_status and the AQ error codes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Due to desires to write userland drivers such as for DPDK support, and
other requests, without needing the rest of the include files, the device
ids are pulled out into a standalone file.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Seen by code review.
If dpdk is run with memory only available on a non-0 socket, then i40e pmd
refuses to initialize ports as this pmd requires some memory on socket 0.
Fix this by setting socket to SOCKET_ID_ANY, so that allocations happen on
the caller socket.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The extended SCTP flow entries are now part of the standard API.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The i40e_xmit_pkts() is called, which often means HW offload is used here,
so we had better remove 'unlikely' check for checksum offload.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Marvin Liu <yong.liu@intel.com>
Fixes issue where ieee15888 timestamping doesn't work for the i40e
pmd when RTE_ABI_NEXT is enabled.
Also refactors repeated ieee15888 flag checking and setting
code into a function.
Test report: http://dpdk.org/ml/archives/dev/2015-August/022496.html
Reported-by: Huilong Xu <huilongx.xu@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
Header buffer address for header split will be filled with the
physical address for DMA, which is actually not needed at all,
as header split hasn't been supported. Hardware requires the
least bit of header address which is 'Descriptor Done' bit when
write back should be set to 0 by driver.
The issue is that if the user wants to reserve an odd number of
bytes between the mbuf header and data buffer, the physical address
to be filled in the descriptor would happen to be odd. That means
the DD bit would be set to non-zero by driver. That will result in
reporting descriptor done wrongly.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Some drivers was not following DPDK convention and
was leaving logging always in even if LOG_LEVEL was configured
to disable debug logs.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: apply same fix to i40e, fm10k and bnx2x]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch fixes the issue:
Testpmd crashed with Segmentation fault when setup tx queues on vf
Steps for reproduce:
- create one vf device from i40e driver
- bind vf device to igb_uio and start testpmd
With debugging tools, we saw the struct i40e_vf is cleared after
memcpy(&dev->data->dev_conf, dev_conf, sizeof(dev->data->dev_conf)) in
rte_eth_dev_configure, which should not happen, and the pointer to
i40e_vf isn't in the range of i40e_adapter.
The root cause is the dev_private_size in i40e virtual function driver
struct rte_i40evf_pmd was set incorrectly.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
I40e VF driver uses the num_queue_pairs in vf structure to construct
queue index look up table. When the nb_rx_queue is less than nb_tx_queue,
num_queue_pairs is equal to nb_tx_queue. It will make the table use
invalid queue index, then application cannot poll packets on these queues.
This patch also moves the inline function i40e_align_floor from
i40e_ethdev.c to i40e_ethdev.h.
Test report: http://dpdk.org/ml/archives/dev/2015-July/021838.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Due to the NIC's firmware update, the input set of sctp flow is changed
to source IP, destination IP, source port, destination port and
Verification-Tag. This patch adds the sport and dport in the programming
packet of flow director.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
Add i40e_dev_free_queues() function and call it from close() functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
There is a segmentation fault if rxq is NULL.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
_clear_cmd() was not being called in failure situations,
resulting in the next command also failing.
Fix several typos.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_i40e_pmd and
rte_i40evf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Move malloc inside eal and create a new section in MAINTAINERS file for
Memory Allocation in EAL.
Create a dummy malloc library to avoid breaking applications that have
librte_malloc in their DT_NEEDED entries.
This is the first step towards using malloc to allocate memory directly
from memsegs. Thus, memzones would allocate memory through malloc,
allowing to free memzones.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
If a descriptor the device drive is handling is the context descriptor,
its type value will be 0x1.
When using the not operator ! to do the conditional check, if the expression
value is zero, the device driver will consider the transaction for this
descriptor has been completed, even its DD field is still 0x1 which means
NIC has not finished the operation on this descriptor.
Use the 0xF to check the DD status to avoid the above issue happens.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Fixes: 05999aab4c ("i40e: add or delete flow director")
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add ixgbe support for new ethdev APIs to enable and read IEEE1588/
802.1AS PTP timestamps.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support querying hash key size per port, an new field of
'hash_key_size' was added in 'struct rte_eth_dev_info' for storing
hash key size in bytes.
The correct hash key size in bytes should be filled into the
'struct rte_eth_dev_info', to support querying it.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch extends flow director to support l2_payload flow
type in i40e driver.
Test report: http://dpdk.org/ml/archives/dev/2015-June/020238.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add checksum offload capability flags which have already been
supported for a long time.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
It configures specific registers to enable double vlan stripping
on RX side and insertion on TX side.
The RX descriptors will be parsed, the vlan tags and flags will be
saved to corresponding mbuf fields if vlan tag is detected.
The TX descriptors will be configured according to the
configurations in mbufs, to trigger the hardware insertion of
double vlan tags for each packets sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The parameter tx_free_thresh is not consistent between the drivers:
some use it as rte_eth_tx_burst() requires, some release buffers when
the number of free descriptors drop below this value.
Let's use it as most fast-path code does, which is the latter, and update
comments throughout the code to reflect that.
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Upcoming drivers will need to be able to support other bus types.
This is a transparent change to how struct eth_driver is initialized.
It has not function or ABI layout impact, but makes adding a later
bus type (Xen, Hyper-V, ...) much easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It wouldn't check the configured maximum packet length, and then
the scattered receiving function wouldn't be selected at all even
if it wants to receive a jumbo frame. The fix is to select the
correct RX function according to the configurations.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
On Fedora 22, with GCC 5.1, errors are reported due to array accesses
being potentially out of bounds. This commit fixes this by adding in an
extra bounds check to the loop counter.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To get device VMDQ info when only i40e VMDQ feature is enabled.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Move i40e PMD to drivers/net directory.
As part of the move, rename the "i40e" directory, containing the "base
driver" code, from "i40e" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
