This patch moves telemetry further down the build, and adds it as a
dependency for EAL. Telemetry V2 is now configured to build by default,
and the legacy support is built when the telemetry config flag is set.
Telemetry now has EAL flags, shown below:
"--telemetry" = Enables telemetry (this is default if no flags given)
"--no-telemetry" = Disables telemetry
When telemetry is enabled, it will attempt to open the new socket
version, and also the legacy support socket (this will depend on Jansson
external dependency and telemetry config flag, as before).
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The ethdev library now registers commands with telemetry, and
implements the callback functions. These commands allow the list of
ethdev ports and the xstats and link status for a port to be queried.
An example using ethdev commands is shown below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 20.05.0-rc0", "pid": 64379, "max_output_len": 16384}
--> /
{"/": ["/", "/ethdev/link_status", "/ethdev/list", "/ethdev/xstats", \
"/help", "/info"]}
--> /ethdev/list
{"/ethdev/list": [0, 1, 2, 3]}
--> /ethdev/link_status,0
{"/ethdev/link_status": {"status": "UP", "speed": 10000, "duplex": \
"full-duplex"}}
--> /ethdev/xstats,0
{"/ethdev/xstats": {"rx_good_packets": 0, "tx_good_packets": 0, \
<snip>
"tx_priority7_xon_to_xoff_packets": 0}}
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Add tracepoints at important and mandatory APIs for tracing support.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Let's stick to the current model of per library ABI version until the
new model is in place.
The ABI changed in the incriminated commit.
The release notes were updated accordingly but the compiled version
number has been missed.
Fixes: 4f25d7d2252f ("ethdev: add return code to device info get function")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Use rte_eth_unformat_addr, so that ethdev can be built and work
without the cmdline library. The dependency on cmdline was
an arrangement of convenience anyway.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This addresses the usability issue raised by OVS at DPDK Userspace
summit. It adds general min/max MTU into device info. For compatibility,
and to save space, it fits in a hole in existing structure.
The initial version sets max MTU to normal Ethernet, it is up to
PMD to set larger value if it supports Jumbo frames.
Also remove the deprecation notice introduced in 18.11 regarding this
change and bump ethdev ABI version.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added new rte_color definition in librte_meter to
consolidate color definition which is currently replicated
in various places such as rte_meter.h, rte_tm.h and rte_mtr.h
Created aliases for rte_tm_color, rte_mtr_color and rte_meter_color
to use new rte_color values.
The definitions of rte_tm_color, rte_mtr_color and rte_meter_color
will be deprecated in future.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The MAC addresses of a port can be matched with devargs.
As the conflict between rte_ether.h and netinet/ether.h is not resolved,
the MAC parsing is done with a rte_cmdline function.
As a result, cmdline library becomes a dependency of ethdev.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Primary and secondary processes share a per-device private data. With
current design it is not possible to have data per-device per-process.
This is required for handling properly the CPP interface inside the NFP
PMD with multiprocess support.
There is also at least another PMD driver, tap, with similar
requirements for per-process device data.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implement the operators of an rte_class for the
ethdev abstraction layer.
Register the layer as such.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This iterator can be customized with a comparison function that will
trigger a stopping condition.
It can be leveraged to write several different iterators that have
similar but non-identical purposes.
It is private to librte_ethdev.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The old offload API is removed in 18.08,
so the library version must be increased,
in order to show the incompatibility with 18.05 one.
Fixes: ab3ce1e0c193 ("ethdev: remove old offload API")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Library folder name and output library name are same except a few flaws
including librte_ether.
This library is network device abstraction layer, the name "ethdev" fits
better than "ether", and library & header files already named as ethdev.
Also there is a rte_ether.h in the net library which can cause confusion.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
