We are going to share the Direct Rules and Direct Verbs flow
device data structures between master and representors in the
E-Switch configurations over multiport IB device.
The code of initializing and destroying these data is
moved to dedicated routines, this is just a preparation
step for actual data sharing.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Add a new PMD driver for AF_XDP which is a proposed faster version of
AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
[2].
This is the vanilla version PMD which just uses a raw buffer registered as
the umem.
[1] https://fosdem.org/2018/schedule/event/af_xdp/
[2] https://lwn.net/Articles/745934/
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
When using Direct Rules we can add actions to jump between tables.
This is extra useful since rule insertion rate is much higher on other
tables compared to table zero.
If no group is selected the rule is added to group 0.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Adds calls to the Direct Rules API inside the glue functions.
Due to difference in parameters between the Direct Rules and Direct
Verbs some of the glue functions API was updated.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This is the first patch of a series that is designed to enable the
Direct Rules API.
The main difference between Direct Verbs and Direct Rules from API
perspective is that in Direct Rules each action has it's own create
function and the object itself is of type void.
In this patch I'm adding functions to generate actions that currently
are done without create action, and I'm changing the action type to be
void *, so in next patches only the glue functions will need to change.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Handle VXLAN and GENEVE TSO on EF10 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Said message cannot be considered as warning since
the PMD anyway reports available offload capabilities
by means of device info interface. Make this log
message informational and improve its formatting
by placing the text itself on the same line.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As a result, code duplication will be avoided in the current
TSO implementations (EFX and EF10 native). The future patch to
add support for tunnel TSO will also reuse the new function.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Make Tx prepare function able to detect packets with invalid header
size when header linearization is required.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add descriptor space check to Tx prepare function to inform a caller
that a packet that needs more than maximum Tx descriptors of a queue
can not be sent.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tx offloads checks should be done in Tx prepare.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement tx_prepare callback. The implementation checks for anything
only in RTE debug mode. No checks are done otherwise because EF10
simple datapath ignores Tx offloads.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement tx_prepare callback and update Tx burst function accordingly.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement generic checks in Tx prepare function and update Tx burst
function accordingly.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Numbers of extra descriptors required for TSO are EF10-specific
in fact. Highlight it in define names.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move the check inside xmit function to the branch in which
the check is mandatory. It makes case when TSO header is not
fragmented a bit more faster.
Fixes: 6bc985e41155 ("net/sfc: support TSO in EF10 Tx datapath")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move the check inside xmit function to the branch in which
the check is mandatory. It makes case when TSO header is not
fragmented a bit more faster.
Fixes: fec33d5bb3eb ("net/sfc: support firmware-assisted TSO")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The API that was defined in OFED 4.5 was replaced both in OFED 4.6 and
in upstream.
This commit updates the API to match the upstream one.
Fixes: f5bf91de738a ("net/mlx5: support flow counters using devx")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Iterating over siblings was done with RTE_ETH_FOREACH_DEV()
which skips the owned ports.
The new iterators RTE_ETH_FOREACH_DEV_SIBLING()
and RTE_ETH_FOREACH_DEV_OF() are more appropriate and more correct.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The Memory Region (MR) for DMA memory can't be created from secondary
process due to lib/driver limitation. Whenever it is needed, secondary
process can make a request to primary process through the EAL IPC
channel (rte_mp_msg) which is established on initialization. Once a MR
is created by primary process, it is immediately visible to secondary
process because the MR list is global per a device. Thus, secondary
process can look up the list after the request is successfully returned.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new PMD parameter (mr_ext_memseg_en) is added to control extension of
memseg when creating a MR. It is enabled by default.
If enabled, mlx4_mr_create() tries to maximize the range of MR
registration so that the LKey lookup tables on datapath become smalle
and get the best performance. However, it may worsen memory utilization
because registered memory is pinned by kernel driver. Even if a page in
the extended chunk is freed, that doesn't become reusable until the
entire memory is freed and the MR is destroyed.
To make freed pages available immediately, this parameter has to be
turned off but it could drop performance.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The Memory Region (MR) for DMA memory can't be created from secondary
process due to lib/driver limitation. Whenever it is needed, secondary
process can make a request to primary process through the EAL IPC
channel (rte_mp_msg) which is established on initialization. Once a MR
is created by primary process, it is immediately visible to secondary
process because the MR list is global per a device. Thus, secondary
process can look up the list after the request is successfully returned.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new PMD parameter (mr_ext_memseg_en) is added to control extension of
memseg when creating a MR. It is enabled by default.
If enabled, mlx5_mr_create() tries to maximize the range of MR
registration so that the LKey lookup tables on datapath become smaller
and get the best performance. However, it may worsen memory utilization
because registered memory is pinned by kernel driver. Even if a page in
the extended chunk is freed, that doesn't become reusable until the
entire memory is freed and the MR is destroyed.
To make freed pages available immediately, this parameter has to be
turned off but it could drop performance.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Secondary process is not allowed to register MR due to a restriction of
library and kernel driver.
Fixes: 7e43a32ee060 ("net/mlx5: support externally allocated static memory")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In order to support secondary process, a few features are required.
a) rdma-core library should allocate device resources using DPDK's
memory allocator.
b) UAR should be remapped for secondary processes. Currently, in order
not to use different data structure for secondary processes, PMD
tries to reserve identical virtual address space for both primary
and secondary processes.
c) IPC channel is necessary, which can be easily set with rte_mp APIs.
Through the channel, Verbs command FD is delivered to the secondary
process and the device stop/start event is also broadcast from
primary process.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
To support secondary process, the memory allocated by library such as
completion rings (CQ) and buffer rings (WQ) must be manageable by EAL,
in order to share it with secondary processes. With new changes in
rdma-core and kernel driver, it is possible to provide an external
allocator to the library layer for this purpose. All such resources
will now be allocated within DPDK framework.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
rte_eth_devices[] is not shared between primary and secondary process,
but a static array to each process. The reverse pointer of device
(priv->dev) becomes invalid if mlx4 supports secondary process.
Instead, priv has the pointer to shared data of the device,
struct rte_eth_dev_data *dev_data;
Two macros are added,
#define PORT_ID(priv) ((priv)->dev_data->port_id)
#define ETH_DEV(priv) (&rte_eth_devices[PORT_ID(priv)])
Cc: stable@dpdk.org
Suggested-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rx/Tx burst function pointers are stored in the rte_eth_dev structure,
which is local to a process. Even though primary process replaces the
function pointers, secondary will not run the new ones. With rte_mp
APIs, primary can easily broadcast a request to stop/start the datapath
of secondary processes.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There's more need to have PMD global data structure. This should be
initialized once per a process regardless of how many PMD instances are
probed. mlx5_init_once() is called during probing and make sure all the
init functions are called once per a process. Currently, such global
data and its initialization functions are even scattered. Rather than
'extern'-ing such variables and calling such functions one by one making
sure it is called only once by checking the validity of such variables, it
will be better to have a global storage to hold such data and a
consolidated function having all the initializations. The existing shared
memory gets more extensively used for this purpose. As there could be
multiple secondary processes, a static storage (local to process) is also
added.
As the reserved virtual address for UAR remap is a PMD global resource,
this doesn't need to be stored in the device priv structure, but in the
PMD global data.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Socket API is used for IPC in order for secondary process to acquire
Verb command file descriptor. The FD is used to remap UAR address.
The multi-process APIs (rte_mp) in EAL are newly introduced.
mlx5_socket.c is replaced with mlx5_mp.c, which uses the new APIs.
As it is PMD global infrastructure, only one IPC channel is established.
All the IPC message types may have port_id in the message if there is
need to reference a specific device.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
As the memory event is propagated to secondary processes, the event is
processed redundantly. This should be processed once because the data
structure used for MR and the event is global across the processes.
Fixes: 974f1e7ef146 ("net/mlx5: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When replenishing mbufs on Rx, buffer address (mbuf->buf_addr) should be
loaded. non-x86 processors (mostly RISC such as ARM and Power) are more
vulnerable to load stall. For x86, reducing the number of instructions
seems to matter most.
For x86, this is simply a load but for other architectures, it is
calculated from the address of mbuf structure by rte_mbuf_buf_addr()
without having to load the first cacheline of the mbuf.
Fixes: 12d468a62bc1 ("net/mlx5: fix instruction hotspot on replenishing Rx buffer")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.10.x version. This
patch bumps the min supported version to 10.14.x.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Using the size of the source string is incorrect when printing using
snprintf. Instead pass in the buffer size to be used appropriately.
Fixes: 457ecf2953fc ("bond: add debug info for mode 6")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit sets the min and max supported MTU values for igb devices
via the eth_igb_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max MTU is calculated as the max packet length
supported minus the transport overhead. To aid in these calculations
a new MACRO 'E1000_ETH_OVERHEAD' has been introduced to consolidate
overhead calculation and avoid duplication.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for ixgbe VF
devices via the ixgbevf_dev_set_mtu() function. Min MTU supported is
set to ETHER_MIN_MTU and max MTU is calculated as the max packet length
supported minus the transport overhead. As transport overhead is the
same for VF and PF ixgbe devices, reuse MACRO 'IXGBE_ETH_OVERHEAD' to
avoid duplication.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for ixgbe devices
via the ixgbe_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max MTU is calculated as the max packet length
supported minus the transport overhead. To aid in these calculations
a new MACRO 'IXGBE_ETH_OVERHEAD' has been introduced to consolidate
overhead calculation and avoid duplication.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for i40e VF
devices via the i40evf_dev_info_get() function. Min MTU supported
is set to ETHER_MIN_MTU and max MTU is calculated as the max packet
length supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for i40e devices
via the i40e_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max mtu is calculated as the max packet length
supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Device speed capability should be specified based on different PHY types
instead of a fixed value, this patch fix the issue.
Fixes: 690175ee51bf ("net/ice: support getting device information")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since previous test is for mtu < 1519 the next else if
is always true. This causes the lgtm static tool to complain.
Not a real issue, just cosmetic.
Fixes: 76d4c652e07d ("virtio: add extended stats")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Since previous test is for mtu < 1519 the next else if
is always true. This causes the lgtm static tool to complain.
Not a real issue, just cosmetic.
Fixes: 4e9c73e96e83 ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
For E-Switch configurations over multiport Infiniband devices
we should add source vport match to correctly distribute
traffic between representors.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
