New CPP interface changes the way firmware upload is managed by
the PMD. It also supports different firmware file names for
having specific firmware applications per card.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Update the license header on bnxt files to be the standard
BSD-3-Clause license used for the rest of DPDK,
bring the files in compliance with the DPDK licensing policy.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add minimal VF driver. Declare functions common to both PF and VF
functionality in separate header file and import the header file.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support of choice the preferred firmware variant to use in device
parameters.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The previous patches in the set convert per-port
logging to use NOTICE level and make this level default.
This provides the possibility to remove the dedicated
toggle for init-related messages and merge init logging
with the main log type. In order to keep these logs silent
by default, INFO level should be used.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Allow TAP PMD to pass user desired MAC address as argument.
The argument value is processed as string delimited by ':',
is parsed and converted to HEX MAC address after validation.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Add classifier configuration support via rte_flow api.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add documentation and example for ingress policer, egress scheduler
and egress rate limiter.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Glue object files are looked up in RTE_EAL_PMD_PATH by default when set and
should be installed in this directory.
During startup, EAL attempts to load them automatically like other plug-ins
found there. While normally harmless, dlopen() fails when rdma-core is not
installed, EAL interprets this as a fatal error and terminates the
application.
This patch requests glue objects to be installed in a different directory
to prevent their automatic loading by EAL since they are PMD helpers, not
actual DPDK plug-ins.
Fixes: f6242d0655 ("net/mlx: make rdma-core glue path configurable")
Cc: stable@dpdk.org
Reported-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Tested-by: Timothy Redaelli <tredaelli@redhat.com>
Enable rx queue interrupts if the app requests them, and vNIC has
enough interrupt resources. Use interrupt vector 0 for link status and
errors. Use vector 1 for rx queue 0, vector 2 for rx queue 1, and so
on. So, with n rx queues, vNIC needs to have at n + 1 interrupts.
For VIC, enabling and disabling rx queue interrupts are simply
mask/unmask operations. VIC's credit based interrupt moderation is not
used, as the app wants to explicitly control when to enable/disable
interrupts.
This version requires MSI-X (vfio-pci). Sharing one interrupt for link
status and rx queues is possible, but is rather complex and has no
user demands.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Currently, enic completely ignores the requested max Rx packet size
(rxmode.max_rx_pkt_len). The desired behavior is that the NIC hardware
drops packets larger than the requested size, even though they are
still smaller than MTU.
Cisco VIC does not have such a feature. But, we can accomplish a
similar (not same) effect by reducing the size of posted receive
buffers. Packets larger than the posted size get truncated, and the
receive handler drops them. This is also how the kernel enic driver
enforces the Rx side MTU.
This workaround works only when scatter mode is *not* used. When
scatter is used, there is currently no way to support
rxmode.max_rx_pkt_len, as the NIC always receives packets up to MTU.
For posterity, add a copious amount of comments regarding the
hardware's drop/receive behavior with respect to max/current MTU.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Currently, when more than 1 receive queues are configured, the driver
always enables RSS with the driver's own default hash type, key, and
RETA. The user is unable to change any of the RSS settings. Address
this by implementing the ethdev RSS API as follows.
Correctly report the RETA size, key size, and supported hash types
through rte_eth_dev_info.
During dev_configure(), initialize RSS according to the device's
mq_mode and rss_conf. Start with the default RETA, and use the default
key unless a custom key is provided.
Add the RETA and rss_conf query/set handlers to let the user change
RSS settings after the initial configuration. The hardware is able to
change hash type, key, and RETA individually. So, the handlers change
only the affected settings.
Refactor/rename several functions in order to make their intentions
clear. For example, remove all traces of RSS from
enicpmd_vlan_offload_set() as it is confusing.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Despite being versatile, the hardware support for filtering has a number
of special properties which must be taken into account. Namely, there is
a known set of valid filters which don't take any effect despite being
accepted by the hardware.
The combinations of match flags and field values which can describe the
exceptional filters are as follows:
- ETHER_TYPE or ETHER_TYPE | LOC_MAC with IPv4 or IPv6 EtherType
- ETHER_TYPE | IP_PROTO or ETHER_TYPE | IP_PROTO | LOC_MAC with UDP or
TCP IP protocol value
- The same combinations with OUTER_VID and/or INNER_VID
These exceptional filters can be expressed in terms of RTE flow rules.
If the user creates such a flow rule, no traffic will hit the underlying
filter, and no errors will be reported.
This patch adds a means to prevent such ineffective flow rules from
being created.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Support destination MAC address match in inner frames.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Exact match of virtual network identifier is supported by parser.
IP protocol match are enforced to UDP.
Only Ethernet protocol type is supported.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Exact match of virtual subnet ID is supported by parser.
IP protocol match are enforced to GRE.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Exact match of VXLAN network identifier is supported by parser.
IP protocol match are enforced to UDP.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The new code uses the new 32-bit Port Capabilities exclusively and
only translates to/from the old 16-bit Port Capabilities at the last
point possible when talking to older Firmware.
For the old versus new Firmware issue, we use the new FW_PARAMS_CMD[PFVF,
CAPS32] command to tell the Firmware that we want Asynchronous Port Status
updates to use the new 32-bit version of the Port Information message. If
we get an error, we know we're dealing with older Firmware, and if not,
we'll start getting th new 32-bit Port Capability message formats.
Also, refactor t4_handle_fw_rpl() to handle new 32-bit Port Capability
replies from firmware in t4_handle_get_port_info().
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Add firmware API for updating RSS hash configuration and key. Move
RSS hash configuration from cxgb4_write_rss() to a separate function
cxgbe_write_rss_conf().
Also, rename cxgb4_write_rss() to cxgbe_write_rss() for consistency.
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Attach to rte_eth_dev devices allocated by Primary process for
Ports other than Port-0 in the secondary process.
Save the Primary rte_eth_dev device eth_dev_data as part of txq
structure needed for tx path.
Fixes: 8318984927 ("cxgbe: add pmd skeleton")
Cc: stable@dpdk.org
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
My english is far worse than those from the marketing team.
Fixes: 80bc1752f1 ("nfp: add guide")
Fixes: d625beafc8 ("doc: update NFP with PF support information")
Fixes: 80987c40fd ("config: enable nfp driver on Linux")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Add note information to intimate about use of option '-d' for shared
library in DPDK application.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The current implementation of the Tap PMD doesn't support packet size
grater than 1522B, so no need to set jumbo frames in the Tap features.
Fixes: 04b2c3c943 ("doc: add tap features")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Other NICs with VF support do not use the _pf suffix for these files
but just for the VF description.
This change makes NFP files consistent in this regard and helps with
how the DPDK web nics features matrix shows NFP devices.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
This patch adds user guide specifically for igb NIC, like ixgbe,
to list all the supported features and known issues.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch updates the i40e guide with new device parameter of
'support-multi-driver'.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since rdma-core glue libraries are intrinsically tied to their respective
PMDs and used as internal plug-ins, their presence in the default search
path among other system libraries for the dynamic linker is not necessarily
desired.
This commit enables their installation and subsequent look-up at run time
in RTE_EAL_PMD_PATH if configured to a nonempty string. This path can also
be overridden by environment variables MLX[45]_GLUE_PATH.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
