Prior to this patch only UIO/VFIO interrupt handlers types were supported.
This patch adds support for the external interrupt handler type, allowing
external drivers to set their own fds with specific interrupt handlers.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Add support for SLES12SP3, which uses kernel 4.4,
but backported features from newer kernels.
Signed-off-by: Nirmoy Das <ndas@suse.de>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
glibc 2.25 is warning about if applications depend on
sys/types.h for makedev macro, it expects to be included
from <sys/sysmacros.h>
Found this error while testing with GCC 6.3.1 on archlinux.
lib/librte_eal/linuxapp/eal/eal_pci_uio.c: In function ‘pci_mknod_uio_dev’:
lib/librte_eal/linuxapp/eal/eal_pci_uio.c:134:13:
error: In the GNU C Library, "makedev" is defined
by <sys/sysmacros.h>. For historical compatibility, it is
currently defined by <sys/types.h> as well, but we plan to
remove this soon. To use "makedev", include <sys/sysmacros.h>
directly. If you did not intend to use a system-defined macro
"makedev", you should undefine it after including <sys/types.h>. [-Werror]
dev = makedev(major, minor);
^~~~~~~~~~~~~~~~~
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
When loading nic_uio from /boot/loader.conf as specified in the Getting
Started Guide doc, the NIC devices were not bound at boot. Unloading the
nic_uio driver and reloading it would cause them to be bound, however.
The root cause appears to be the fact that when the module is loaded at
boot, the call to find the pci device when parsing the b:d:f parameter
fails to return the device. That means that later on when the device
is probed as part of a PCI scan, no action is taken as it's not recorded
as a device to be used.
We fix this by having the b:d:f string parsed again on probe if the
initial check to see if it's an already-known device fails. In my tests,
this causes the NIC devices to be successfully bound at boot time, as
well as leaving things working as before in the case the module is loaded
post-boot.
Fixes: 764bf26873b9 ("add FreeBSD support")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When binding with vfio-pci, secondary process cannot be started with
an error message:
cannot find TAILQ entry for PCI device.
It's due to: struct rte_pci_addr is padded with 1 byte for alignment
by compiler. Then below comparison in commit 2f4adfad0a69
("vfio: add multiprocess support") will fail if the last byte is not
initialized.
memcmp(&vfio_res->pci_addr, &dev->addr, sizeof(dev->addr)
And commit cdc242f260e7 ("eal/linux: support running as unprivileged user")
just triggers this bug by using a stack un-initialized variable.
The fix is to use rte_eal_compare_pci_addr() for pci addr comparison.
Fixes: 2f4adfad0a69 ("vfio: add multiprocess support")
Fixes: cdc242f260e7 ("eal/linux: support running as unprivileged user")
Cc: stable@dpdk.org
Reported-by: Pawel Rutkowski <pawelx.rutkowski@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Some compilers require definition of vfio_iommu_spapr_tce_ddw_info
before its use in vfio_iommu_spapr_tce_info, so move tce_info
definition below tce_ddw_info.
Fixes: 468f42cc2645 ("vfio: fix build on old kernel")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Recently added "dma_zalloc_coherent()" call is causing build error
for Linux kernels < 3.2.
compile error:
lib/librte_eal/linuxapp/igb_uio/igb_uio.c:
In function ‘igbuio_pci_probe’:
lib/librte_eal/linuxapp/igb_uio/igb_uio.c:434:2:
error: implicit declaration of function ‘dma_zalloc_coherent’
[-Werror=implicit-function-declaration]
map_addr = dma_zalloc_coherent(&dev->dev, 1024,
^
dma_zalloc_coherent() introduced with Linux kernel 3.2, with commit
Linux: 842fa69f3e0c ("include/linux/dma-mapping.h: add dma_zalloc_coherent()")
Since it does not exist for older kernels, causing a build error.
Switched to dma_alloc_coherent() API to prevent build error.
Fixes: d287e4d41be0 ("igb_uio: map dummy DMA forcing IOMMU domain attachment")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This eliminates the overhead of a task switch when an interrupt arrives.
Signed-off-by: David Su <david.w.su@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
For using a DPDK app when iommu is enabled, it requires to
add iommu=pt to the kernel command line. But using igb_uio driver
makes DMAR errors because the device has not an IOMMU domain.
Since kernel 3.15, iommu=pt requires to use the internal kernel
DMA API for attaching the device to the IOMMU 1:1 mapping, aka
si_domain. Previous versions did attach the device to that
domain when intel iommu notifier was called.
This is not a problem if the driver does later some call to the
DMA API because the mapping can be done then. But DPDK apps do
not use that DMA API at all.
Doing this dma map and unmap is harmless even when iommu is not
enabled at all.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Current device hotplug is just supported by UIO managed devices.
This patch adds same functionality with VFIO.
It has been validated through tests using IOMMU and also with
VFIO and no-iommu mode.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The flags member of irq_set should be ORed with VFIO_IRQ_SET_ACTION_MASK
and not VFIO_IRQ_SET_ACTION_UNMASK. The bug was found by code inspection.
Fixes: 5c782b3928b8 ("vfio: interrupts")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
compile error:
.../build/build/lib/librte_eal/linuxapp/kni/kni_net.c:124:6:
error: implicit declaration of function ‘signal_pending’
[-Werror=implicit-function-declaration]
if (signal_pending(current) || ret_val <= 0) {
^~~~~~~~~~~~~~
Linux 4.11 moves signal function declarations to its own header file:
Linux: 174cd4b1e5fb ("sched/headers: Prepare to move signal wakeup &
sigpending methods from <linux/sched.h> into <linux/sched/signal.h>")
Use new header file "linux/sched/signal.h" to fix the build error.
Cc: stable@dpdk.org
Reported-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Pankaj Gupta <pagupta@redhat.com>
Rather than querying the number of CPUs on the system multiple times, and
printing out the number each time, just query the value from sysctl once
and store it for future reuse.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The rte_eal_init function will now pass failure reason hints to the
application. To help app developers decipher this, add some brief
information about what the codes are indicating.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
For now, exit the init. It's likely that even aborting the initialization
is premature in this case, as it may be possible to proceed even if one
bus or another is not available.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Even if one vdev should fail, there's no need to prevent further
processing. Log the error, and reflect it to the higher levels to
decide.
Seems like it's possible to continue. At least, the error is reflected
properly in the logs. A user could then go and correct or investigate
the situation.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some devices may be inaccessible for a variety of reasons, or the
PCI-bus may be unavailable causing the whole thing to fail. Still,
better to continue attempts at probes.
Since PCI isn't neccessarily required, it may be possible to simply log
the error and continue on letting the user check the logs and restart
the application when things have failed.
This will usually be an issue because of permissions. However, it could
also be caused by OOM. In either case, errno will contain the
underlying cause.
For linux, it is safe to re-init the system here, so allow the
application to take corrective action and reinit.
For BSD, this is not the case, for other reasons, including hugepage
allocation has already happened, and needs to be properly uninitialized.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Plugins are useful and important. However, it seems crazy to abort
everything just because they don't initialize properly.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
There could be some confusion as to why the call failed - this change
will always reflect the value of the error in rte_error.
When initializing the interrupt thread, there are a number of possible
reasons for failure - some of which are correctable by the application.
Do not panic() needlessly, and give the application a change to reflect
this information to the user.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
After code inspection, there is no way for eal_timer_init() to fail. It
simply returns 0 in all cases. As such, this test could either go-away
or stay here as 'future-proofing'.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When log initialization fails, it's generally because the fopencookie
failed. While this is rare in practice, it could happen, and it is
likely because of memory pressure. So, flag the error, and allow the
user to retry.
Memory init can only fail when access to hugepages (either as primary or
secondary process) fails (and that is usually permissions). Since the
manner of failure is not reversible, we cannot allow retry.
There are some theoretical racy conditions in the system that _could_
cause early tailq init to fail; however, no need to panic the
application. While it can't continue using DPDK, it could make better
alerts to the user.
rte_eal_alarm_init() call uses the linux timerfd framework to create a
poll()-able timer using standard posix file operations. This could fail
for a few reasons given in the man-pages, but many could be
corrected by the user application. No need to panic.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When memzone initialization fails, report the error to the calling
application rather than panic(). Without a good way of detaching /
releasing hugepages, at this point the application will have to restart.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It's possible that the application could take a corrective action here,
and either prompt the user for different arguments, or at least perform
a better logging. Exiting this early prevents any useful information
gathering from the application layer.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When attempting to scan hugepages, signal to the eal that an error has
occurred, rather than performing a panic.
If we fail to acquire hugepage information, simply signal an error to
the application. This clears the run_once counter, allowing the user or
application to take a corrective action and retry.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This adds a new API to check for the eal cpu versions.
It's now possible to gracefully exit the application, or for
applications which support non-dpdk datapaths working in concert with
DPDK datapaths, there no longer is the possibility of exiting for
unsupported CPUs.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
There may be no way to gracefully recover, but the application
should be notified that a failure happened, rather than completely
aborting. This allows the user to proceed with a "slow-path" type
solution.
After this change, the EAL CPU NUMA node resolution step can no longer
emit an rte_panic. This aligns with the code in rte_eal_init, which
expects failures to return an error code.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The FreeBSD implementation wasn't registering new devices
with the device framework on start up. However, common
code attempts to unregister them on shutdown which causes
a SEGFAULT. This fix makes the FreeBSD code do the same
thing as the Linux code for registration.
Fixes: 13a1317d3ba7 ("pci: create device list and fallback on its members")
Cc: stable@dpdk.org
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Allow the BAR setup to succeed if a device has at least 1 BAR region
defined. Previously, the device probe would only succeed if at least one
memory BAR existed, but there are devices that have only port I/O BARs.
For example, on Virtual Box a virtio device has only a single I/O BAR
because by default MSI-X is not enabled. While in qemu/kvm the virtio
device has MSI-X enabled and therefore has both an I/O and Memory BAR.
The following are excerpts from "lspci -nnvvvv -s 00:09.0" on both types of
systems.
Virtual Box:
Region 0: I/O ports at d260 [size=32]
Capabilities: [80] #00 [0000]
QEMU/KVM:
Region 0: I/O ports at c060 [size=32]
Region 1: Memory at febd1000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at feb80000 [disabled] [size=256K]
Capabilities: [40] MSI-X: Enable+ Count=3 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
For Linux kernel 4.0 and newer, the ability to obtain
physical page frame numbers for unprivileged users from
/proc/self/pagemap was removed. Instead, when an IOMMU
is present, simply choose our own DMA addresses instead.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This adds a check to ensure that the container_of() macro is not used to
cast away (remove) constness.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This fixes the usage of structure members that are declared const to get
a pointer to the embedding parent structure.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Re-enable CONFIG_RTE_LIBRTE_SCHED, since it is needed to build
correctly.
Fix a few warnings when compiling mpipe_tilegx.c.
Remove an empty rte_cpu_feature_table[] array using a bogus type.
Properly set RTE_OBJCOPY_{TARGET,ARCH} in mk/arch/tile/rte.vars.mk.
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
It's trivial to directly invoke a read of the special-purpose
register that holds the clock cycle counter, so just do that.
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
When removing log history functions, the map has not been updated.
Fixes: d7e61ad3ae36 ("log: remove deprecated history dump")
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The max number of interrupt request is possible
be changed after rte_intr_callback_register, so
in get_max_intr, we need to check if necessary to
update the max_intr.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The "dev->intr_handle.fd" is possibly a negative value while it is
passed as an argument to function "close". Fix the check to the fd.
Fixes: 5a60a7ffc801 ("pci: introduce functions to alloc and free uio resource")
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
When a secondary process wants access to the VFIO container file
descriptor, the primary process calls vfio_get_container_fd() which
always opens an entirely new file descriptor on /dev/vfio/vfio.
However, once the file descriptor has been passed to the subprocess, it
is effectively duplicated, meaning that the copy of the file descriptor
in the primary process is no longer needed. However, the primary
process does not close the duplicate fd, which results in a resource
leak.
This can be reproduced by starting a primary process with a small
RLIMIT_NOFILE limit configured to use VFIO for at least one device, and
repeatedly launching secondary processes until the file descriptor limit
is exceeded.
Fix the resource leak by closing the local vfio container file
descriptor after passing it to the secondary process.
Fixes: 2f4adfad0a69 ("vfio: add multiprocess support")
Cc: stable@dpdk.org
Signed-off-by: Patrick MacArthur <patrick@patrickmacarthur.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The pointer set by strdup() needs to be cleared on failure to avoid a
potential double-free from the caller.
Found with clang static analysis:
lib/librte_eal/common/eal_common_devargs.c:123:2:
warning: Attempt to free released memory
free(buf);
^~~~~~~~~
Fixes: 0fe11ec592b2 ("eal: add vdev init and uninit")
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
The log "Debug logs available - lower performance" should
now only be displayed when dataplane debug logs are enabled.
The issue occurs only if the default log level (CONFIG_RTE_LOG_LEVEL) is
set to DEBUG in the configuration, which is not the case by default.
Fixes: 5d8f0baf69ea ("log: do not drop debug logs at compile time")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
If the name is too long, it triggers BUG in alloc_netdev().
Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
