Announce removal of unused enum value (RTE_ACL_CLASSIFY_NUM).
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
rte_dev_event has never been used outside of the EAL.
No point in exposing it.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The API ``rte_security_session_create`` takes only single mempool
for session and session private data. So the application need to create
mempool for twice the number of sessions needed and will also lead to
wastage of memory as session private data need more memory compared to session.
Hence the API will be modified to take two mempool pointers - one for session
and one for private data. This is very similar to crypto based session
create APIs.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Enumerators RTE_CRYPTO_CIPHER_LIST_END, RTE_CRYPTO_AUTH_LIST_END,
RTE_CRYPTO_AEAD_LIST_END will be removed to prevent some problems
that may arise when adding new algorithms.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Environment configuration is the responsibility of distributions
or upper-level frameworks.
DPDK focus on documenting the requirements and some recommendations.
If some specific parts are complex, they can deserve some scripts.
Maintaining a good adaptative deployment setup is a project by itself.
Anyway this script was interactive, useful only for experimenters.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
A new API is planned to be introduced for sampling and mirroring
with rte_flow. It should be more generic and allow more use cases.
This deprecation is to show the direction, avoiding overlapping APIs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The functions for L2 tunnel were missed when marking the legacy
filtering API as deprecated. That's why a separate notice is done
to make clear that it will be removed as well in DPDK 20.11.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The flow director config, part of the legacy filtering API,
was marked as deprecated last year.
A separate notice is added to make clear that these specific structs
will be removed as well in DPDK 20.11, as the rest of the legacy
filtering API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Deprecation of rte_eth_dev_filter_ctrl() was announced in 2016,
and confirmed last year by avoiding include of rte_eth_ctrl.h.
After 4 years, it is time to complete the removal of the API
which is replaced with rte_flow.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Since DPDK 18.11, some drivers are migrating to a new behaviour,
releasing port resources on close.
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE triggers this new mode
in the migrated drivers.
After 2 years, the flag and the old behaviour will be removed.
Last drivers not migrated will have to complete the switch.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
In order to prepare for adding more features requiring more space in mbuf,
some static fields must become dynamic.
Some small layout changes may have performance benefits as well.
The deprecation notice for atomic refcount is moved and reworded
to fit below the layout deprecation.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The ABI changes associated with this notification will better support
devices that:
1. Have limits on the number or queues that may be linked to a port
2. Have ports that are limited to exactly one linked queue
3. Are not able to transparently transfer the event flow_id field
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The PCI resources map API (pci_map_resource/pci_unmap_resource) was
imposing use of Unix mmap flags while it does not make sense on Windows.
This API was only used to internally setup PCI devices in the PCI bus
driver and has no known external users.
Announce its removal in 20.11 with its associated structures.
The workaround implemented in the commit 9d2b245937 ("pci: keep API
compatibility with mmap values") will be removed at the same time.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Gaetan Rivet <grive@u256.net>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
rte_kernel_driver is only used by the PCI subsystem and has polluted
ethdev for no reason.
Hide it in the PCI bus driver.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Gaetan Rivet <grive@u256.net>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add to the documentation for 20.08 a notice about the changes of rawdev
APIs proposed by patchset [1].
[1] http://inbox.dpdk.org/dev/20200709152047.167730-1-bruce.richardson@intel.com/
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Add in an official notice that the make build system is being removed in
20.11 and provide a link to instructions on how to build using meson and
ninja instead.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
OVS-DPDK seems to set the reset bit for every flow query. Honor
the bit by resetting the SW counter values after assigning them.
Also set the 'hit' bit only if the counter value retrieved by HW
is non-zero.
While querying flow stats, use max possible entries in the fc table scan
for valid entries instead of active entries as the active entry can be in
any slot in the table.
This is a critical fix for OVS-DPDK flow aging.
Fixes: 306c2d28e2 ("net/bnxt: support count action in flow query")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Adjusted resource allocations for the hardware resources
like TCAM entries, action records, stat counters, exact match records to
scale up offload flows.
Also increased IPv4 nat entries to 1023.
This patch is a critical fix to enable driver load on current and all
FW versions going forward.
Fixes: cef3749d50 ("net/bnxt: update TruFlow resource allocation numbers")
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Some confusing comments were still present from old days,
when most drivers were from Intel.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Different device has different hash capability, it should not be
expected that all hash set would be successful to set into all
devices by default. So remove the return checking when hash default
set. And remove gtpu hash default set, iavf only enable hash for
general protocols.
Fixes: c94366cfc6 ("net/iavf: add GTPU in default hash")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Wei Xie <weix.xie@intel.com>
The two fixes are not the real root cause for MDD event, it mitigates
the failure rate when different test mode, so revert them.
Fixes: 2a0c9ae4f6 ("net/ice: fix TCP checksum offload")
Fixes: 7365a3cee5 ("net/ice: calculate TCP header size for offload")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The variables 'td_offset' and 'td_tag' should be reset to 0 for every
burst packet, otherwise the fields of Tx Descriptor will be set wrong,
this will cause the MDD event error, and Tx will hang.
Fixes: 17c7d0f9d6 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The driver name was registered as "net_mlx5_regex".
It is renamed as "regex_mlx5".
The same name is used in mlx5_regex_driver.pci_driver.driver.name,
instead of "mlx5_regex", for consistency.
The string used for log registration (pmd.regex.mlx5) could be derived
from the driver name. A macro is created so name definitions are close.
Fixes: cfc672a90b ("regex/mlx5: support probing")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ori Kam <orika@mellanox.com>
When a virtq is destroyed, the SW should be able to continue the virtq
processing from where the HW stopped.
The current destroy behavior in the driver saves the virtq state (used
and available indexes) only when LM is requested.
So, when LM is not requested the queue state is not saved and the SW
indexes stay invalid.
Save the virtq state in the virtq destroy process.
Fixes: bff7350110 ("vdpa/mlx5: prepare virtio queues")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Xueming Li <xuemingl@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The driver CQ event management is done by non vhost library thread,
either the dpdk host thread or the internal vDPA driver thread.
When a queue is updated the CQ may be destroyed and created by the vhost
library thread via the queue state operation.
When the queue update feature was added, it didn't synchronize the CQ
management to the queue update what may cause invalid memory access.
Add the aforementioned synchronization by a new per device configuration
mutex.
Fixes: c47d6e8333 ("vdpa/mlx5: support queue update")
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The code should look into "slab" to figure out the index returned from
rte_bitmap_scan().
Fixes: cc02518132 ("net/netvsc: split send buffers from Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When parameter reta_size < RTE_RETA_GROUP_SIZE, reta_count will be 0.
Then this function will be deadloop.
Fixes: 734ce47f71 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Zhiguang He <hezhiguang3@huawei.com>
Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Add description about Tx scheduling timestamp upper limit.
If timestamp exceeds the value, it is marked by PMD as being
into "too-distant-future" and not scheduled at all
(is being sent without any wait).
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Previous fix added definition of number of retries for UAR allocation.
This value is adequate for x86 systems with 4K pages.
On Power9 system with 64K pages the required value is 32.
This patch updates the defined value from 2 to 32.
Fixes: a0bfe9d56f ("net/mlx5: fix UAR memory mapping type")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Change /dev/huge to /dev/hugepages which is the default directory
on most systems.
Bugzilla ID: 492
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
The path to the ethtool application was slightly incorrect in the
documentation. This patch corrects that path.
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Cc: stable@dpdk.org
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
To help managing patch dependencies, both for maintainers or automation
tasks, document a syntax for commit logs or cover letters to express
their dependencies.
Using the syntax proposed in Bugzilla ID 210:
[https://bugs.dpdk.org/show_bug.cgi?id=210]
Depends-on: series-NNNNN ("Title of the series")
OR
Depends-on: patch-NNNNN ("Title of the patch")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
When sphinx-build reports its version information to stderr rather
than stdout, the wrapper script misses it, and then fails to run.
We can fix this by redirecting stderr to stdout for the version
query call.
Fixes: f5ab2074cf ("doc: rebuild with meson whenever a file changes")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ciara Power <ciara.power@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
When all checks are completed on the specified commit logs, the script
indicates if all are valid, or if there were some failures.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch modifies the arguments expected by the check-git-log script,
to match the format of arguments for the checkpatches script. Both
scripts now take certain argument options in the same format, making
them easier to use.
e.g. Both now take a commit ID range by "-r <range>"
The checkpatches help print is also updated to include the "-h" option.
The contributor's guide includes the usage of both the checkpatches and
check-git-log scripts, which needed to be updated to reflect the now
standardised format.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
The script checkpatch.pl (used in checkpatches.sh) can use a dictionary
from the codespell project to check spelling.
There are multiple dictionaries to be used.
The script build-dict.sh concatenate multiple dictionaries and remove
some annoying false positives.
The dictionary built by this script must be saved in a file which
is referenced with the environment variable DPDK_CHECKPATCH_CODESPELL.
The easiest is to export this variable in ~/.config/dpdk/devel.config.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
-DALLOW_EXPERIMENTAL_API is always set for in-tree compilation since
https://git.dpdk.org/dpdk/commit/?id=acec04c4b2f5
Warn people not to copy/paste this flag that was needed before.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Commit cc02518132 ("net/netvsc: split send buffers from Tx
descriptors") changed the way that transmit descriptors are
allocated. They come from a single pool instead of being
individually attached to each mbuf. To find the IOVA, you need
to calculate the offset from the base of the pool.
Fixes: cc02518132 ("net/netvsc: split send buffers from Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
rte_exit should be called when the application exits due to
invalid EAL or application arguments.
Fixes: 850f3733f8 ("examples/packet_ordering: new sample app")
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Giving invalid or zero portmask as command line option to
these applications will have an unexpected response.
The reason behind this is that the return value of function
that parses portmask is stored in a variable whose datatype is
unsigned int, hence returning -1 in case of zero or
invalid portmask causes an unexpected behaviour.
If we return 0 instead of -1 this issue can be resolved.
The program already contains the functionality to print
"invalid portmask" and program usage if zero is returned.
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds examples to the Telemetry HowTo guide, to demonstrate
commands that use parameters. The programmer's guide is also modified to
include details on writing a callback function for a new command.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Store port_id in pmd_internals when eth kni device is created.
Then set packet port of rte_mbuf in function eth_kni_rx.
Cc: stable@dpdk.org
Signed-off-by: Jecky Pei <jpei@sonicwall.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reserved field should be 0x60 instead of 0x40.
Will fail FW check otherwise.
Fixes: 9428310ae1 ("regex/mlx5: add engine status check")
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
mlx5_nl_mac_addr_flush should flush all allocated MAC
addresses.
The MAC addresses array size should be of size
MLX5_MAX_MAC_ADDRESSES, but currently we return without
flushing the addresses if size is MLX5_MAX_MAC_ADDRESSES.
This was fixed by not allowing an array larger than
MLX5_MAX_MAC_ADDRESSES.
Fixes: e9a8ac59b6 ("common/mlx5: fix MAC addresses assert")
Cc: stable@dpdk.org
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
