i40e VF close would stop the VF first, if VF already stopped this
result duplicate add/del MAC address which cause failure in executing
admin command.
Fix this by adding VF stop status check and sync up VF MAC address count
during add/del.
Fixes: d42aaf3000 ("i40e: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Previously SW workaround for GL_SWR_PRI_JOIN_MAP is added for X710
performance. As new FW version 6.0 supports ADQ,
value for GL_SWR_PRI_JOIN_MAP should be changed, otherwise
ehtertype filter will be impacted.
Fixes: 973273c7a4 ("i40e: workaround for X710 performance")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
If LSC flag is changed to off at last device start, the
enable flag is not cleared in HW.
This patch fixes it.
Fixes: f4668a33ef ("net/i40e: fix link status change interrupt")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tx CRC size is not counted by VSI's stats register, so it is not necessary
excluded by driver.
Fixes: 98abce237b ("net/i40e: fix VF statistics")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add the support of the Traffic Management API,
rte_tm_hierarchy_commit.
When calling this API, the driver tries to enable
the TM configuration on HW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Internal Rx packet bytes is over counted, CRC size is not excluded,
that cause incorrect Rx bytes or even negative value.
Fixes: 0bcdc44510 ("net/i40e: exclude internal packet's byte count")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
In function i40e_vsi_config_tc_queue_mapping(), if 'enabled_tcmap' is 0,
'total_tc' might be 0. Then 'total_tc' might be used in a division
by 0 in "qpnum_per_tc = i40e_align_floor(vsi->nb_qps / total_tc)".
Fix it by changing 'total_tc' from 0 to 1 just as func
i40e_vsi_update_queue_mapping() does.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
TPID can be set by set_switch_config aq, change the TPID setting
by set_switch_config on new FW release.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
When a port is using a bogus SFP, the PCI probing returns an error,
preventing to register a portid.
To give a better chance to the applications to retry after the SFP is
changed, move this check in eth_i40e_dev_configure(), so that only a
port reconfiguration is needed to retry.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Device name resides in two different locations, in rte_device->name and
in ethernet device private data.
For now, the copy in the ethernet device private data is required for
multi process support, the name is the how secondary process finds about
primary process device.
But for drivers there is no reason to use the copy in the ethernet
device private data.
This patch updates PMDs to use only rte_device->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
rte_driver->name has the driver name and all physical and virtual
devices has access to it.
Previously it was not possible for virtual ethernet devices to access
rte_driver->name field (because eth_dev used to keep only pci_dev),
and it was required to save driver name in the device private struct.
After re-works on bus and vdev, it is possible for all bus types to
access rte_driver.
It is able to remove the driver name from ethdev device private data and
use eth_dev->device->driver->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
This patch supports input set selection for flow
director filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
CRC bytes should be excluded, so rx/tx bytes of VF stats is aligned
with PF stats.
Fixes: 9aace75fc8 ("i40e: fix statistics")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tx/Rx byte counts of internal managed packet should be
excluded from the total rx/tx bytes.
Fixes: 9aace75fc8 ("i40e: fix statistics")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When counting max packet length from MTU, count
VLAN tag length twice for QinQ packets.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Some customers find adding MAC addr to VF sometimes can fail,
but it is still stored in dev->data->mac_addrs[ ]. So this
can lead to some errors that assumes the non-zero entry in
dev->data->mac_addrs[ ] is valid.
Following acknowledgements are from specific NIC PMD
maintainer for their managing part.
This patch changes the ethdev internal API, it should not be
backported to a stable/LTS release so far.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The PCI code will move to the bus drivers directory.
Rename functions from rte_eal_pci_ to rte_pci_
to prepare the move of the driver out of EAL.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When deleting the default MAC VLAN filter, it's
expected that it may fail.
So downgrade the error print from warning to
debug.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Change level of log message from ERR to DEBUG and reword it,
in the i40e_dev_consistent_tunnel_filter_set() function.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
When receiving the unsupported AQ messages, it's taken as
an error. It's not appropriate and triggers too much
unnecessary print.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
VF link status rely on PF's notification, so when PF link status
be updated, it should notify VF to update link status also.
Current implementation only cover part of the situation when PF's link
status is updated, call i40e_notify_all_vfs_link_status in
i4e_dev_link_update will cover all situationa.
Fixes: bb6722fb5c ("net/i40e: fix VF bonded device link down")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The mapping from hardware defined packet type to software defined
packet type is static for i40e device, the patch let each ethdev to
to have their own copy of mapping table, this give the possibility
that different ethdev can be set different PTYPE mapping rule which
is the requirement to support following hardware's dynamic PTYPE
feature.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
To keep consistent with previous release, Priority Flow Control (PFC)
need to be disabled by default. This patch fixes it.
This also fixes an issue where traffic was not forwarded by testpmd
occasionally. In those cases ~4770 pps seen on one of the ports rather
than the full rate (>20mpps).
Fixes: 6f0a707e5b ("net/i40e: enable DCB on SRIOV VFs")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
There are some new PCTYPEs on X722, but they have not been announced
on the RTE lib, so if it can not set corresponding hash input set for
these packet type, the hash function won’t work.
So we need to handle them base on the translation of the new
PCTYPE and the original PCTYPE.
Fixes: b6a0ec4182 ("i40e: use AQ for Rx control register read/write")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Make i40e_notify_all_vfs_link_status as a wrapper of
i40e_notify_vf_link_status so duplicate code can be removed.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The patch change the prototype of callback function
(rte_intr_callback_fn) by removing the unnecessary parameter.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Failed to destroy tunnel filter rule if the action of
the tunnel filter is VF, root cause is the wrong vsi
used.
Fixes: c50474f31e ("net/i40e: support tunnel filter to VF")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
After adding VLAN filter, the VLAN promiscuous mode is
disabled. But there's no chance to enable it.
So add the check after deleting VLAN filter. If there's
no VLAN filter left, enable the VLAN promiscuous mode.
Fixes: 9f0645cd14 ("net/i40e: fix VLAN filter")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The QinQ filter uses big buffers, set the big_buffer flag
when restoring a QinQ filter.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add i40e_cloud_filter_qinq_create function, and call it
from i40e_dev_consistent_tunnel_filter_set function.
Replace the Outer IP filter with the QinQ filter.
QinQ allows multiple VLAN tags to be inserted into a single Ethernet
frame. A QinQ frame is a frame that has two VLAN 802.1Q headers.
802.1Q tunneling (QinQ) is a technique often used by Metro Ethernet
providers as a layer 2 VPN for customers.
Signed-off-by: Laura Stroe <laura.stroe@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The L3 MAP register is initialised to support QinQ
cloud filters.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
MPLSoUDP & MPLSoGRE is not supported by tunnel
filter due to limited resource of HW, this patch
enables MPLS tunnel filter by replacing inner_mac
filter.
This configuration will be set when adding MPLSoUDP
and MPLSoGRE filter rules, and it will be invalid
only by NIC core reset.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add i40e_tunnel_type enumeration type to refine consistent
tunnel filter, it will be esay to add new tunnel type for
i40e.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Previously, only tunnel filter to PF is supported.
This patch adds i40e_dev_consistent_tunnel_filter_set
function for consistent filter API to support tunnel
filter to VF.
Signed-off-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Rework tunnel filter functions to align with the
new command buffer for add/remove cloud filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set some TCs to strict priority mode.
It's a global setting on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set a specific TC's max bandwidth on a VF.
User can call the API to set VF TC's max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Allocate all TCs' relative bandwidth (percentage) on
a specific VF.
It can be taken as relative min bandwidth setting.
User can call the API to set VF TC's min bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Support setting VF max bandwidth from PF.
User can call the API on PF to set a specific VF's
max bandwidth.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
VLAN filter is not working on i40e because driver need to
disable the VLAN promiscuous mode and set the VLAN filter
table.
Fixes: 5f2b0e3f76 ("net/i40e: set VF VLAN filter from PF")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When setting up the VSIs, MAC filter is used for
receiving MAC broadcast packets.
We should follow it to implement the broadcast
promiscuous mode setting.
Fixes: 61fff9b4c6 ("net/i40e: set VF broadcast mode from PF")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
enable DCB on SRIOV VFs, including
- UP and TC mapping according to dcb_tc in struct rte_eth_dcb_rx_conf.
- TC and queue mapping: queues are divided equally for each TC.
- UP insert when sending packet according to the TC the Tx queue
belongs to.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Testpmd failed to start in another hugetlbfs mount point on
i40e, the root cause is that hash table is always allocated
on socket 0.
Issue can be reproduced by forcing testpmd to allocate memory
only from node 1:
testpmd --socket-mem=0,8192 -- -i --socket-num=1
EAL: PCI device 0000:81:00.0 on NUMA socket 1
EAL: probe driver: 8086:1572 net_i40e
PMD: eth_i40e_dev_init(): FW 4.40 API 1.4 NVM 04.05.03 eetrack 80001cd8
RING: Cannot reserve memory
HASH: memory allocation failed
PMD: i40e_init_ethtype_filter_list(): Failed to create ethertype hash
table!
EAL: Error - exiting with code: 1
Cause: Requested device 0000:81:00.0 cannot be used
Fix the issue by assigning socket id during hash parameter definition.
Fixes: 5c53c82c81 ("net/i40e: store flow director filter")
Fixes: 425c3325f0 ("net/i40e: store tunnel filter")
Fixes: 078259773d ("net/i40e: store ethertype filter")
Cc: stable@dpdk.org
Reported-by: Ivan Nardi <nardi.ivan@gmail.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
When setting up the VEB, default TC bitmap is used.
But after setting the default TC bitmap, it's not stored. So when we're
trying to get the enabled TCs on the VEB, it's always wrong.
Fixes: 5135f3ca49 ("i40e: enable DCB in VMDQ VSIs")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fix the redundant delay in function link update. There is no need to
call rte_delay_ms and hold CPU for 100ms when link status is up.
Fixes: 263333bbb7 ("i40e: fix link status timeout")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The GL_SWR_PRI_JOIN_MAP registers are effective on filters, changing
the register's default value will fail the ethertype filter.
The GL_SWR_PRI_JOIN_MAP values are different for each NIC, and current
X722 register values are wrong.
Fix X722 ethertype filter by setting registers to X722 default NVM
values.
Fixes: 92fbf2cbdf ("i40e: support X722 and its A0 hardware")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
dev_flags is wrongly overwritten with RTE_ETH_DEV_DETACHABLE value
in drivers after rte_eth_copy_pci_info().
Previous values of the dev_flags set in rte_eth_copy_pci_info(),
like RTE_ETH_DEV_INTR_LSC, are get lost. That will fail the device
configuration.
Fix by preventing dev_flags overwritten.
Fixes: 22dda618c0 ("pci: separate detaching ethernet ports from PCI devices")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Creating IPv4 flow and IPv6 flow will cause conflict error.
Root cause is there's no IP info included in tunnel filter
input.
Fixes: 425c3325f0 ("net/i40e: store tunnel filter")
Fixes: d416530e63 ("net/i40e: parse tunnel filter")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Change the order of releasing the VSI's.
Release the VMDq VSI's first, then release the main VSI.
Fixes: 3cb446b4ae ("i40e: free vmdq vsi when closing")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
filter_type is not set when removing all macvlan filters. It will
cause error when send AQ command to HW.
This patch fixes this issue.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch add support to get/clear VF statistics
from PF side.
Two APIs are added:
rte_pmd_i40e_get_vf_stats.
rte_pmd_i40e_reset_vf_stats.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
add rte_pmd_i40e_set_vf_vlan_filter API.
User can call the API on PF to enable/disable
a set of VF's VLAN filters.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add rte_pmd_i40e_set_vf_vlan_tag API.
User can call the API on PF to enable/disable a specific
VF's VLAN tag.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF broadcast mode from PF.
User can call the API on PF to enable/disable a specific
VF's broadcast mode.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support inserting VF VLAN id from PF.
User can call the API on PF to insert a VLAN id to a
specific VF.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add a function to configure vlan strip enable/disable for specific
SRIOV VF device.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support setting VF MAC address from PF.
User can call the API on PF to set a specific
VF's MAC address.
PF should set MAC address before VF initialized,
if PF sets the MAC address after VF initialized,
new MAC address won't be effective until VF
reinitialized.
This will remove all existing MAC filters.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF multicast promiscuous mode from
PF.
User can call the API on PF to enable/disable a specific
VF's multicast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF unicast promiscuous mode from
PF.
User can call the API on PF to enable/disable a specific
VF's unicast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling TX loopback from PF.
User can call the API on PF to enable/disable TX loopback
for all the PF and VFs.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF VLAN anti-spoofing from
PF.
User can call the API on PF to enable/disable a specific
VF's VLAN anti-spoofing.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF MAC anti-spoofing from
PF.
User can call the API on PF to enable/disable a specific
VF's MAC anti-spoofing.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add an API to expose the ability, that PF can notify VF
when link status changes, to APP.
So if PF APP doesn't want to enable interruption but check
link status by itself, PF APP can let VF know link status
changed.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Join message lines for easier grepping.
PRIxXX are left glued to strings as they are in other parts of the file.
Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds i40e_flow_create function to create a
rule. It will check if a flow matches ethertype filter
or flow director filter or tunnel filter, if the flow
matches some kind of filter, then set the filter to HW.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_parse_fdir_filter to check
if a rule is a flow director rule according to the
flow pattern, and the function also gets the flow
director info.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_validation function to check if
a flow is valid according to the flow pattern.
i40e_flow_parse_ethertype_filter is added first, it also
gets the ethertype info.
i40e_flow.c is added to handle all generic filter events.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add support of restoring ethertype filter in case filter
dropped accidentally, as all filters need to be added and
removed by user obviously for generic filter API.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Currently there's no flow director filter stored in SW. This
patch stores flow director filters in SW with cuckoo hash,
also adds protection if a flow director filter has been added.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Currently there's no tunnel filter stored in SW.
This patch stores tunnel filter in SW with cuckoo
hash, also adds protection if a tunnel filter has
been added.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Currently there's no ethertype filter stored in SW.
This patch stores ethertype filter with cuckoo hash
in SW, also adds protection if an ethertype filter
has been added.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add FEC bits to the PHY capabilities AQ command struct. This is required
for 25GbE support. Change the name of the generic mod_type_ext field to
indicate that it is now used for handling FEC.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
For 25G devices auto link update was disabled because it was causing
link issues when enabled.
The problem found because of interface changes in admin queue command
"set_phy_config" and "get_phy_capabilities" for 25G.
This patch fixes the issue and enables auto link update for 25G devices.
Fixes: 75d133dd32 ("net/i40e: enable 25G device")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Attaching and detaching ethernet ports from an application
is not the same thing as physically removing a PCI device,
so clarify the flags indicating support. All PCI devices
are assumed to be physically removable, so no flag is
necessary in the PCI layer.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The function rte_eth_xstats_get() return an array of tuples (id,
value). The value is the statistic counter, while the id references a
name in the array returned by rte_eth_xstats_get_name().
Today, each 'id' returned by rte_eth_xstats_get() is equal to the index
in the returned array, making this value useless. It also prevents a
driver from having different indexes for names and value, like in the
example below:
rte_eth_xstats_get_name() returns:
0: "rx0_stat"
1: "rx1_stat"
2: ...
7: "rx7_stat"
8: "tx0_stat"
9: "tx1_stat"
...
15: "tx7_stat"
rte_eth_xstats_get() returns:
0: id=0, val=<stat> ("rx0_stat")
1: id=1, val=<stat> ("rx1_stat")
2: id=8, val=<stat> ("tx0_stat")
3: id=9, val=<stat> ("tx1_stat")
This patch fixes the drivers to set the 'id' in their ethdev->xstats_get()
(except e1000 which was already doing it), and fixes ethdev by not setting
the 'id' field to the index of the table for pmd-specific stats: instead,
they should just be shifted by the max number of generic statistics.
Fixes: bd6aa172cf ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
