It adjusts the number of queues for RSS from power of 2 to any as
long as it does not exceeds the hardware allowed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Use new function rte_eth_copy_pci_info.
Copy device info for the following pdevs:
bnx2x
cxgbe
e1000
enic
fm10k
i40e
ixgbe
mlx4
mlx5
virtio
vmxnet3
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It supports both Admin queue based and directly writing registers
based RSS hash key and lookup table configuration, as X722 supports
AQ based configuration.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add xstats functions to i40e PMD, allowing extended statistics
to be retrieved from the NIC and exposed to the DPDK.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
This patch adds one new API to get dcb related info.
rte_eth_dev_get_dcb_info
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch enables DCB feature on Intel XL710/X710 NICs. It includes:
Receive queue classification based on traffic class
Round Robin ETS schedule (rx and tx)
Priority flow control
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
To support FVL PMD can select which RX and TX function should be used
according to the queue config.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Feature Add: Rx/Tx flow control support for the i40e
All the Rx/Tx LFC enable/disable operation is done by the F/W,
so PMD driver need to use the Set PHY Config AD command to trigger the PHY
to do the auto-negotiation, after the Tx/Rx pause ability is negotiated,
the F/W will help us to set the related LFC enable/disable registers.
PMD driver also need to configure the related registers to control
how often to send the pause frame and what the value in the pause frame.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds a workaround to drop flow control frames from being
transmitted from VSIs.
With this patch in place a malicious VF cannot send flow control or PFC
packets out on the wire.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Seen by code review.
If dpdk is run with memory only available on a non-0 socket, then i40e pmd
refuses to initialize ports as this pmd requires some memory on socket 0.
Fix this by setting socket to SOCKET_ID_ANY, so that allocations happen on
the caller socket.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
I40e VF driver uses the num_queue_pairs in vf structure to construct
queue index look up table. When the nb_rx_queue is less than nb_tx_queue,
num_queue_pairs is equal to nb_tx_queue. It will make the table use
invalid queue index, then application cannot poll packets on these queues.
This patch also moves the inline function i40e_align_floor from
i40e_ethdev.c to i40e_ethdev.h.
Test report: http://dpdk.org/ml/archives/dev/2015-July/021838.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Add i40e_dev_free_queues() function and call it from close() functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch depends on the Port Hotplug Framework.
It implements the eth_dev_uninit functions for rte_i40e_pmd and
rte_i40evf_pmd.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add ixgbe support for new ethdev APIs to enable and read IEEE1588/
802.1AS PTP timestamps.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support querying hash key size per port, an new field of
'hash_key_size' was added in 'struct rte_eth_dev_info' for storing
hash key size in bytes.
The correct hash key size in bytes should be filled into the
'struct rte_eth_dev_info', to support querying it.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
It configures specific registers to enable double vlan stripping
on RX side and insertion on TX side.
The RX descriptors will be parsed, the vlan tags and flags will be
saved to corresponding mbuf fields if vlan tag is detected.
The TX descriptors will be configured according to the
configurations in mbufs, to trigger the hardware insertion of
double vlan tags for each packets sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Upcoming drivers will need to be able to support other bus types.
This is a transparent change to how struct eth_driver is initialized.
It has not function or ABI layout impact, but makes adding a later
bus type (Xen, Hyper-V, ...) much easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
To get device VMDQ info when only i40e VMDQ feature is enabled.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Move i40e PMD to drivers/net directory.
As part of the move, rename the "i40e" directory, containing the "base
driver" code, from "i40e" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
