This patch adds functional and performance tests for membership
library.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
xmem_size and xmem_usage need to know the status of mempool flags,
so add 'flags' arg in _xmem_size/usage() api.
Following patch will make use of that.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This should be an comparison operation rather than an assignment
operation.
Fixes: 5e41ab250d ("app/test: unit tests for bonding mode 4")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The define RTE_RING_SZ_MASK is the maximum size supported by the
rte_ring. The size is checked at ring creation.
There is no reason today to mask the result of
rte_ring_sp_enqueue_burst() or rte_ring_sc_dequeue_burst() with this
value. The flag RTE_RING_QUOT_EXCEED was previously included in the
returned value but it was removed in
commit 77dd306427 ("ring: remove watermark support").
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch fixes the dynamic log levels testing in logs_autotest.
Introduction of rte_log_set_level() in patch c1b5fa94a4 was done
with parameter RTE_LOG_EMERG which caused all RTE_LOG() calls an
early return due to all given levels were far below EMERG.
If first two logs supposed to show up on console, the initial log
level must be low (DEBUG). It is than changed above ERR when we test
if TESTAPP2 log type can be filtered by log type log level.
Fixes: c1b5fa94a4 ("eal: support dynamic log types")
Signed-off-by: Radoslaw Biernacki <radoslaw.biernacki@linaro.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
lcore_states store the state of the lcore. Fixing the invalid
dereference of lcore_states with service number
Unit test case service_lcore_start_stop fails with the above fix.
Service core was stopped without stopping the service.
This commit fixes the test by adding negative and positive cases of
stopping the service lcore before and after stopping the service
respectively
Fixes: 21698354c8 ("service: introduce service cores concept")
Fixes: f038a81e1c ("service: add unit tests")
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds a new flag that the component (or "backend")
can use to indicate readyness. The service function callback
will not be called until the component sets itself as ready.
The use-case behind adding this feature is eg: a service that
requires configuration before it can start. Any service that
emulates an ethdev will have rte_eth_dev_configure() called,
and only after that the service will know how many queues/etc
to allocate. Once that configuration is complete, the service
marks itself as ready using rte_service_component_runstate_set().
This feature request results from prototyping services, and
requiring a flag in each service to note "internal" readyness.
Instead that logic is now lifted to the service library.
The unit tests have been updated to test the component runstate.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the service_get_by_name() function to
accept an integer, and removes the service_get_by_id() function.
All functions now accept an integer argument representing the
service, so it is no longer required to expose the service_spec
pointers to the application.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the unregister API to accept an integer.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the statistics functions to use integer ids
for services instead of pointers. Passing UINT32_MAX to the dump
function prints all info, similar to passing NULL previously.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the API to move from two separate start
and stop functions, to a "runstate" API which allows setting
the runstate. The is_running API is replaced with an function
to query the runstate. The runstate functions take a id value
for service. Unit tests and the eventdev sw pmd are updated.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit reworks the service register function to accept
an extra parameter. The parameter is a uint32_t *, which when
provided will be set to the integer service_id that the newly
registered service is represented by.
This is useful for services that wish to validate settings at
a later point in time - they need to know their own service id.
This commit updates the eventdev sw pmd, as well as unit tests
to use the new register API.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit updates the APIs exposed to map service cores and
services. The previous APIs required a pointer to a service,
and used two separate functions for enable and disable. The
new API uses an integer ID for the service and has a parameter
for map or unmap. Unit tests are updated and passing, and the
map file is updated to the new function names.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit adds a macro to easily validate a service ID, and then
lookup the service pointer, or return a user-specified error code.
This macro will be heavily used in the following patches as it will
be ID based instead of pointer-based.
The probe_capability function is reworked to use an integer ID instead
of a pointer. Rework the service_get_name() function is updated to use
IDs. Unit tests are updated to keep things compiling after each commit.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Fixes: 7a364faef1 ("cryptodev: remove crypto device type enumeration")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Bonding devices name must start with "net_bonding" prefix.
Fixes: 9bf4901d1a ("bus/vdev: remove probe with driver name option")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Drivers are looking by name of the device so change namespace to proper
one.
Fixes: 43b630244e ("app/test: add dynamic bonding RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When test case "test_balance_l23_tx_burst_ipv4_toggle_ip_addr" is
calling balance_l23_tx_burst(), the ip_addr instead of mac_addr
should be toggled according to the test name.
Fixes: 92073ef961 ("bond: unit tests")
Cc: stable@dpdk.org
Signed-off-by: Herbert Guan <herbert.guan@arm.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
There were double-free problems in some test cases, which will cause
a duplicated mbuf will be added into mempool. After double-free,
some new allocated mbuf will hold a same address and thus cause the
memory corruption.
Another minor issue is that in some test cases, allocated mbuf will
not be released after test case exits. Hopefully these leaked mbuf
will be released by the next test case in its setup phase when
stopping the virtual pmd ports, while this do is a memory leak of
the exited test case.
To fix above 2 issues, this patch will do:
1) Release virtual pmd ports' tx queue in the clean up function
remove_slaves_and_stop_bonded_device() of each test cases.
2) Do not release allocated mbufs for test bursts. These mbufs
will be released in remove_slaves_and_stop_bonded_device() when
test case exits.
Fixes: 92073ef961 ("bond: unit tests")
Signed-off-by: Herbert Guan <herbert.guan@arm.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Device name in device structure in virtual device used in
link_bonding_autotest is not set what causes segmentation fault when
rte_eth_dev_allocated is called.
Fixes: a1e7c17555 ("ethdev: use device name from device structure")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When calling rte_cryptodev_sym_session_init(),
if there was an error, it returned -1, instead
of returning the specific error code, which can
be valuable for the application for error handling.
Fixes: b3bbd9e5f2 ("cryptodev: support device independent sessions")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Additional Authenticated Data (AAD) is called "aad" in most
places of cryptodev, but it was called "add_auth_data"
in the AEAD transform transform (aead_xform).
This field is renamed to "aad_length" in order to keep
consistency.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For KASUMI F9 algorithm, COUNT, FRESH and DIRECTION
input values need to be contiguous with
the message, as described in the KASUMI and QAT PMD
documentation.
Before, the COUNT and FRESH values were set
as part of the AAD (now IV), but always set before
the beginning of the message.
Since now the IV is set after the crypto operation,
it is not possible to have these values in the
expected location.
Therefore, as these are required to be contiguous,
cryptodev API will expect these them to be passed
as a single buffer, already constructed, so
authentication IV parameters not needed anymore.
Fixes: 681f540da5 ("cryptodev: do not use AAD in wireless algorithms")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
QAT supports authentication only operations,
for any authentication algorithm (such as SHA1-HMAC),
as long as it is supported by QAT, so it means
that it is not necessary to create a chained operation
in order to use these algorithms.
Fixes: 1703e94ac5 ("qat: add driver for QuickAssist devices")
CC: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Session was NULL as test_crypto_session not initialised.
Fixes: b3bbd9e5f2 ("cryptodev: support device independent sessions")
Signed-off-by: Srisivasubramanian S <ssrinivasan@caviumnetworks.com>
Revert "devargs: make device types generic"
This commit broke the rte_devargs API by changing the meaning of
the rte_devtype enum.
Restore the previous API, unit tests and function calls.
Introduce parallel enum that acts as translation between previous API
and current structures.
Restoring the previous API means that -w and -b are not usable anymore
with any bus having implemented the "parse" operation. Only PCI devices
can be used with -w and -b, virtual devices are declared using vdev.
This (partially) reverts commit bd279a7936.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Add a bunch of unit tests, to ensure that the service
core functions are operating as expected.
As part of these tests a dummy service is registered which
allows identifying if a service callback has been invoked
by using the CPU tick counter. This allows identifying if
functions to start and stop service lcores are actually having
effect.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Because accuracy of timing to the microsecond is not guaranteed
in rte_eal_alarm_set, this function will not be called before
the requested time, but may be called a period of time
afterwards which can not be calculated. In order to ensure
test alarm running success, this patch added the delay time
before check the flag.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Virtual device/driver probing done via name.
A new alternative method introduced to probe the device with providing
driver name in devargs as "driver=<driver_name>".
This patch removes alternative method and fixes virtual device usages
with proper device names.
Fixes: 87c3bf29c6 ("test: do not short-circuit null device creation")
Fixes: d39670086a ("eal: parse driver argument before probing drivers")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_devargs now represents any device from any bus.
The related devtypes do not identify a bus anymore, only which scan
policy the device subscribes to.
The bus itself is identified by a bus handle previously introduced.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Remove the dependency of this subsystem upon bus specific device
representation.
Devargs only validates that a device declaration is correct and handled
by a bus. The device interpretation is done afterward within the bus.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add some basic tests for the event ring functions. Not everything needs
testing as there is so much code re-use from the rte_ring code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The session mempool pointer is needed in each queue pair,
if session-less operations are being handled.
Therefore, the API is changed to accept this parameter,
as the session mempool is created outside the
device configuration function, similar to what ethdev
does with the rx queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Change crypto device's session management to make it
device independent and simplify architecture when session
is intended to be used on more than one device.
Sessions private data is agnostic to underlying device
by adding an indirection in the sessions private data
using the crypto driver identifier.
A single session can contain indirections to multiple device types.
New function rte_cryptodev_sym_session_init has been created,
to initialize the driver private session data per driver to be
used on a same session, and rte_cryptodev_sym_session_clear
to clear this data before calling rte_cryptodev_sym_session_free.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating the session mempool while configuring
the crypto device, apps will create the mempool themselves.
This way, it gives flexibility to the user to have a single
mempool for all devices (as long as the objects are big
enough to contain the biggest private session size) or
separate mempools for different drivers.
Also, since the mempool is now created outside the
device configuration function, now it needs to be passed
through this function, which will be eventually passed
when setting up the queue pairs, as ethernet devices do.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Remove crypto device driver name string definitions from librte_cryptodev,
which avoid to library changes every time a new crypto driver was added.
The driver name is predefined internaly in the each PMD.
The applications could use the crypto device driver names based on
options with the driver name string provided in command line.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Changes device type identification to be based on a unique
driver id replacing the current device type enumeration, which needed
library changes every time a new crypto driver was added.
The driver id is assigned dynamically during driver registration using
the new macro RTE_PMD_REGISTER_CRYPTO_DRIVER which returns a unique
uint8_t identifier for that driver. New APIs are also introduced
to allow retrieval of the driver id using the driver name.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
QAT, OpenSSL and DPAA2 PMDs support 192-bit and 256-bit key sizes
for AES-GCM, apart from 128-bit keys. Therefore, these tests that were
only used by AES-NI MB PMD are extended to these other two PMDs.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Added AES GCM tests for 192-bit keys, now that AES GCM PMD
supports it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
AES-GCM tests are used for AES-NI MB, OpenSSL,
QAT and DPAA2_SEC PMDs, so they are not specific to the first one.
Therefore, _mb_ prefix can be removed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
AESNI MB PMD supports now 12-byte IVs, so some tests
are added to check that, apart from the ones with 16-byte IVs,
as this is still compatible.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
AES-GCM support is added as per the AEAD type of crypto
operations. Support for AES-CTR is also added.
test/crypto and documentation is also updated for
dpaa2_sec to add supported algorithms.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that AAD is only used in AEAD algorithms,
there is no need to keep AAD in the authentication
structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Now that all the structures/functions for AEAD algorithms
are in place, migrate the two supported algorithms
AES-GCM and AES-CCM to these, instead of using
cipher and authentication parameters.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AES-GMAC is an authentication algorithm, based on AES-GCM
without encryption. To simplify its usage, now it can be used
setting the authentication parameters, without requiring
to concatenate a ciphering transform.
Therefore, it is not required to set AAD, but authentication
data length and offset, giving the user the option
to have Scatter-Gather List in the input buffer,
as long as the driver supports it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Digest length was duplicated in the authentication transform
and the crypto operation structures.
Since digest length is not expected to change in a same
session, it is removed from the crypto operation.
Also, the length has been shrunk to 16 bits,
which should be sufficient for any digest.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Additional authenticated data (AAD) information was duplicated
in the authentication transform and in the crypto
operation structures.
Since AAD length is not meant to be changed in a same session,
it is removed from the crypto operation structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For wireless algorithms (SNOW3G, KASUMI, ZUC),
the IV for the authentication algorithms (F9, UIA2 and EIA3)
was taken from the AAD parameter, as there was no IV parameter
in the authentication structure.
Now that IV is available for all algorithms, there is need
to keep doing this, so AAD is not used for these algorithms
anymore.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV parameters (offset and length) should not
change for operations in the same session, these parameters
are moved to the crypto transform structure, so they will
be stored in the sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV now is copied after the crypto operation, in
its private size, IV can be passed only with offset
and length.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Usually, IV will change for each crypto operation.
Therefore, instead of pointing at the same location,
IV is copied after each crypto operation.
This will let the IV to be passed as an offset from
the beginning of the crypto operation, instead of
a pointer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Usually, IV will change for each crypto operation.
Therefore, instead of pointing at the same location,
IV is copied after each crypto operation.
This will let the IV to be passed as an offset from
the beginning of the crypto operation, instead of
a pointer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Session type (operation with or without session) is not
something specific to symmetric operations.
Therefore, the variable is moved to the generic crypto operation
structure.
Since this is an ABI change, the cryptodev library version
gets bumped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
ring network driver is limited to 32 characters
the name of device was extended to net_ring_unit_test_mode4_slave_0
which is 33 characters long.
Fixes: 5e41ab250d ("app/test: unit tests for bonding mode 4")
Cc: stable@dpdk.org
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Added CRC compute APIs for arm64 utilizing the pmull
capability.
Added new file net_crc_neon.h to hold the arm64 pmull
CRC implementation.
Added wrappers in rte_vect.h for those neon intrinsics
which are not supported in GCC version < 7.
Verified the changes with crc_autotest unit test case
Signed-off-by: Ashwin Sekhar T K <ashwin.sekhar@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Remove rte_pause() definition from rte_common.h and
switchover to architecture specific rte_pause.h
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
In one of the SNOW3G unit tests, insufficient memory
was allocated, leading to a buffer overflow.
Fixes: 2b52e1e95a ("app/test: add SNOW 3G UEA2 with offset")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Instead of using duplicated functions to get the algorithm
strings, use the functions from the cryptodev library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Instead of passing the authentication and cipher offset
from the test vectors, just get them from the IV and AAD lengths.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For AES/DES tests, there is no need to leave out
the first block from the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AAD should not point at IV for AES algorithms.
For AES-GCM, AAD will point at additional data in the mbuf.
For the other algorithms (such as 3DES CBC), AAD is not used.
Fixes: ffbe3be0d4 ("app/test: add libcrypto")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Currently, pool resources are allocated statically
and are not freed. Results of that test can not run more than once.
Fix removes static dependency from test application and
now allocating and freeing resources dynamically.
Test runs for more than once.
Fixes: af75078fec ("first public release")
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Defining the value 0 as default value for dequeue timeout
will help the application reduce the configuration setup
if the application is interested only in default
timeout value.
removed "min_dequeue_limit" negative testcase as
min_dequeue_limit value could be zero(which is
default timeout now) if driver has
dev_info->min_dequeue_timeout_ns = 1.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
octeontx specific priority test expects priority of each
event queue to be a unique value. Verify that condition
before it processes to test the priority.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Single-link optimized ports previously did not correctly track
credits when dequeued, and re-enqueued as a FORWARD type. This
could "inflate" the number of credits in the system.
A unit test is added to reproduce and verify the issue, and the
fixed implementation counts FORWARD packets, and reduces the
number of credits the port has if it is of single-link type.
Fixes: 656af91800 ("event/sw: add worker core functions")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Gage Eads <gage.eads@intel.com>
This commit adds a new statistic to the SW eventdev PMD.
The statistic shows how many packets were sent from a
queue to a port. This provides information on how traffic
from a specific queue is being load-balanced to worker cores.
Note that these numbers should be compared across all queue
stages - the load-balancing does not try to perfectly share
each queue's traffic, rather it balances the overall traffic
from all queues to the ports.
The statistic is printed from the rte_eventdev_dump() function,
as well as being made available via the xstats API.
Unit tests have been updated to expect more per-queue statistics,
and the correctness of counts and counts after reset is verified.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
When creating a virtual pmd to test link bonding,
the socket id was checked, if it was in the range
of available sockets.
This check is unnecessary, as the socket specified
might not have memory anyway, so it will fail
at memory allocation.
Therefore, the best solution is to remove this check.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
GCC flags an uninitialized value, so provide an initializer.
Fixes: 3a17ff401f ("test/eventdev: add basic SW tests")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Issue flagged by GCC 7 as a switch fall-through.
Fixes: dbb860e03e ("cmdline: tests")
CC: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The VDEV code will move to the bus drivers directory.
Rename functions from rte_eal_vdev_ to rte_vdev_
to prepare the move of the driver out of EAL.
The prefix rte_eal_vdrv_ is also renamed to rte_vdev_.
It was used for registration of vdev drivers.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Since commit <dda987315ca2> ("vdev: make virtual bus use
its device struct"), rte_eal_vdev_init cannot be called
with same name twice.
If several devices with the same driver are needed
(as in the crypto scheduler test), then driver name argument
has to be unique, concatenating the driver name and an index.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Instead of creating two virtual devices per PMD, if they have not
been initialized from EAL already, create only one, as only the
first device is used for the crypto tests.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Mempool_perf autotest currently does perf regression for:
* nochache
* cache
Introducing default_pool, mainly targeted for ext-mempool regression
test. Ext-mempool don't need 'cache' modes so only adding test-case
support for 'nocache' mode.
So to run ext-mempool perf regression, user has to set
RTE_MBUF_DEFAULT_MEMPOOL_OPS="<>"
There is chance of duplication ie.. if user sets
RTE_MBUF_DEFAULT_MEMPOOL_OPS="ring_mp_mc" then regression
will happen twice for 'ring_mp_mc'
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Mempool test currently supports:
* ring_mp_mc
* stack
Adding a new default pool options. So, ring* + stack + default
(which can be 'stack' or 'ring')
* This way, whatever the value of RTE_MBUF_DEFAULT_MEMPOOL_OPS is set,
it would be verified.
* even if that means duplicating some test (for example when "stack" is
set as default and it already part of standard test)
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This removes the now unused struct eth_driver.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
There is no need to export this API. Remaining users should use the
rte_eal_vdev_init() function instead.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
A virtual device should get initialized through the rte_eal_vdev_init()
function to properly initialize the driver.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
These tests are not suited for the rte_bus PCI implementation anymore.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
test app's rxmode, VF driver will report the VF launch failure. So
this patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The patch change the prototype of callback function
(rte_intr_callback_fn) by removing the unnecessary parameter.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This patch deprecates the following functions in 17.05,
which will be removed in 17.08.
- rte_crpytodev_scheduler_mode_get()
- rte_crpytodev_scheduler_mode_set()
These two new functions replace them, fixing the typo in their names.
- rte_cryptodev_scheduler_mode_get()
- rte_cryptodev_scheduler_mode_set()
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds ZUC EEA3/EIA3 test cases for QAT crypto test suite
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch merges ZUC test vectors into one header file
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
DOCSIS BPI mode is handled in the QAT PMD by sending full blocks to the
hardware device for encryption and using OpenSSL libcrypto for pre- or
post-processing of any partial blocks.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adds support in OpenSSL PMD for algorithm following the DOCSIS
specification, which combines DES-CBC for full DES blocks (8 bytes)
and DES-CFB for last runt block (less than 8 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Tested-by: Yang Gang <gangx.yang@intel.com>
Underlying IPSec Multi buffer library implements
DOCSIS specification, so this commit adds support
for this new feature, which combines AES-CBC for full
AES blocks (16 bytes) and AES-CFB for last runt block
(less than 16 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Since the new device configuration API is updated, we can make use of
this feature to the crypto scheduler PMD to configure its slaves
automatically with the same configurations it got. As originally the
slaves have to be manually configured one by one, this patch should
help reducing the coding complexity.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
There is a compilation error in the following case:
make config T=x86_64-native-linuxapp-gcc
sed -i 's,CONFIG_RTE_LIBRTE_CRYPTODEV=y,CONFIG_RTE_LIBRTE_CRYPTODEV=n,' \
build/.config
sed -i 's,CONFIG_RTE_APP_CRYPTO_PERF=y,CONFIG_RTE_APP_CRYPTO_PERF=n,' \
build/.config
make -j4
make -j4 test-build
test_eventdev.c:39:27: fatal error:
rte_cryptodev.h: No such file or directory
#include <rte_cryptodev.h>
^
Removing the include induces a new error, (missing declaration of
rte_eal_vdev_init()), which is fixed by including rte_dev.h.
Fixes: f8f9d233ea ("test/eventdev: add unit tests")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch provides a set of tests for verifying the functional
correctness of 16-bit and 32-bit CRC APIs.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Deprecate the following functions:
- rte_set_log_level(), replaced by rte_log_set_global_level()
- rte_get_log_level(), replaced by rte_log_get_global_level()
- rte_set_log_type(), replaced by rte_log_set_level()
- rte_get_log_type(), replaced by rte_log_get_level()
The new functions provide a better control of the per-type log level,
and have a better name prefix (rte_log_).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce 2 new functions to support dynamic log types:
- rte_log_register(): register a log name, and return a log type id
- rte_log_set_level(): set the log level of a given log type
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add the following tests based existing helper functions
- Queue based producer-consumer ingress order test
- Run existing queue and flow based ordering test in dequeue timeout
mode
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add flow based producer-consumer based ingress order test
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add queue and flow based pipeline test with maximum number of
stages available in the device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add queue based pipeline test with maximum number of stages available
in the device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add flow based pipeline test with maximum number of stages available
in the device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add queue based two stage pipeline test with all combination
of schedule types.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add flow based two stage pipeline test with all combination
of schedule types.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add unit test case to verify queue to port multi link
establishment operation.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add test case to verify queue to port single link establishment operation.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add unit test case to verify multi queue enqueue and multi core/port
dequeue operation.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Added unit test case to verify the priority associated with
each event queue available in the device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Added unit test case to verify enqueue and dequeue operations
with multiple queues and a single port.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Added unit test case to verify simple event enqueue and dequeue
operation with different schedule types
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
add test setup and teardown routines.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds the worker loopback test to verify
that the deadlock avoidance scheme is functioning, and
a holb (head-of-line-blocking) test to ensure the head
of line blocking avoidance is correct.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This commit introduces xstats tests for statistics
and reset functionality.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This commit adds various tests for load-balancing and
queue prioritization.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This commit adds basic enqueue and dequeue unit tests,
some negative invalid tests, and configuration.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add the test infrastructure, create and destroy the test
instance.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This commit reworks the return value handling of the
timeout ticks test. This feature is not mandatory for
a pmd, the eventdev layer returns -ENOTSUP if the PMD
doesn't implement the function.
The test is modified to check if the return value is
-ENOTSUP, and return -ENOTSUP to the test framework,
which can handle "unsupported" tests since patch[1].
As such, this test will function correctly if the
patchset linked below is applied, it fails if the
patch is not applied and the PMD doesn't the timeout
ticks function.
Note it does not depend (as a compile time dependency)
on the patchset linked below.
[1] http://dpdk.org/dev/patchwork/patch/21979/
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The software eventdev can lock-up if not all queues are
linked to a port. For this reason, the software evendev
fails to start if queues are not linked to anything.
This commit creates dummy links from all queues to port
0 in the eventdev setup function and start/stop test,
which would otherwise fail due to unlinked queues.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Minimum value of nb_event_ports and/or nb_event_queues
should be one before reconfiguring the event device.
Fixes: f8f9d233ea ("test/eventdev: add unit tests")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds basic unit tests for the eventdev API.
commands to run the test app:
./build/app/test -c 2
RTE>>eventdev_common_autotest
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit adds support to the cfgfile library for parsing a key=value
line that has no value string specified (e.g., "key="). This can be used
to override a configuration attribute that has a default value or default
list of values to set it back to an undefined value to disable
functionality.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The current cfgfile comment character is hardcoded to ';'. This commit a
new API to allow the user to specify which comment character to use while
parsing the file.
This is to ease adoption by applications that have an existing
configuration file which may use a different comment character. For
instance, an application may already have a configuration file that uses
the '#' as the comment character.
The approach of using a new API with an extensible parameters structure was
used rather than simply adding a new argument to the existing API to allow
for additional arguments to be introduced in the future.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The current implementation of the cfgfile library requires that all
key=value pairs be within [SECTION] definitions. The ini file standard
allows for key=value pairs in an unnamed section.
https://en.wikipedia.org/wiki/INI_file#Global_properties
This commit adds the capability of parsing key=value pairs from such an
unnamed section. The CFG_FLAG_GLOBAL_SECTION flag must be passed to the
rte_cfgfile_load() API to enable this functionality. Any key=value pairs
found before the first section can be accessed in the section named
"GLOBAL".
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This commit adds the basic infrastructure for the cfgfile library unit
tests. It includes success path tests for the most commonly used APIs.
More unit tests will be added later.
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring enqueue burst/bulk functions so that
those functions can optionally return the amount of free space in the
ring. This information can be used by applications in a number of ways,
for instance, with single-producer queues, it provides a max
enqueue size which is guaranteed to work. It can also be used to
implement watermark functionality in apps, replacing the older
functionality with a more flexible version, which enables apps to
implement multiple watermark thresholds, rather than just one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The bulk fns for rings returns 0 for all elements enqueued and negative
for no space. Change that to make them consistent with the burst functions
in returning the number of elements enqueued/dequeued, i.e. 0 or N.
This change also allows the return value from enq/deq to be used directly
without a branch for error checking.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove the watermark support. A future commit will add support for having
enqueue functions return the amount of free space in the ring, which will
allow applications to implement their own watermark checks, while also
being more useful to the app.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The debug option only provided statistics to the user, most of
which could be tracked by the application itself. Remove this as a
compile time option, and feature, simplifying the code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The size and mask fields are duplicated in both the producer and
consumer data structures. Move them out of that into the top level
structure so they are not duplicated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This is the main switch over between the legacy API and the new
burst API. We rename all the functions in rte_distributor.c to remove
the _v1705, and we add in _v20 in the rte_distributor_v20.c
We also rename the rte_distributor_next.h as rte_distributor.h, as
this is now the public header.
At the same time, we need the autotests and sample app to compile
properly, hence those changes are in this patch also.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In the next few patches, we'll want to test old and new API,
so here we're allowing different parameters to be passed to
the tests, instead of just a distributor struct.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add a new unit test case status called "unsupported".
This is useful in marking a test case "unsupported" if testcase
returns -ENOTSUP at runtime.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Store only the test case name in unit test case structure.The actor who
renders the test status can add appropriate test status. This enables
adding the new test case status without storing the additional
information in the unit test case structure.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
